From a9f313afa9a65a692718b8609fd47ae1dcb60523 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 16 Nov 2010 12:30:00 +0000 Subject: Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates. Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command. --- Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c | 10 ++++++---- Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h | 2 +- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'Projects/AVRISP-MKII/Lib/XPROG') diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c index ce02ebe95..60e755265 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c @@ -96,13 +96,15 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void) */ bool XMEGANVM_WaitWhileNVMControllerBusy(void) { + /* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */ + XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS); + /* Poll the NVM STATUS register while the NVM controller is busy */ for (;;) { - /* Send a LDS command to read the NVM STATUS register to check the BUSY flag */ - XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS); - + /* Fetch the current status value via the pointer register (without auto-increment afterwards) */ + XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT << 2) | PDI_DATSIZE_1BYTE); uint8_t StatusRegister = XPROGTarget_ReceiveByte(); /* We might have timed out waiting for the status register read response, check here */ diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h index 8d7181aa2..9f51b2738 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h @@ -56,7 +56,7 @@ #endif /** Serial carrier TPI/PDI speed when hardware TPI/PDI mode is used. */ - #define XPROG_HARDWARE_SPEED 500000 + #define XPROG_HARDWARE_SPEED 250000 /** Total number of bits in a single USART frame. */ #define BITS_IN_USART_FRAME 12 -- cgit v1.2.3