From 8ecdc2b1441417bf97661a3d3edd17a5afd707bf Mon Sep 17 00:00:00 2001
From: Dean Camera <dean@fourwalledcubicle.com>
Date: Sun, 27 Dec 2009 12:28:29 +0000
Subject: Rename AVRISP project folder to AVRISP-MKII.

---
 Projects/AVRISP/AVRISP.c | 134 -----------------------------------------------
 1 file changed, 134 deletions(-)
 delete mode 100644 Projects/AVRISP/AVRISP.c

(limited to 'Projects/AVRISP/AVRISP.c')

diff --git a/Projects/AVRISP/AVRISP.c b/Projects/AVRISP/AVRISP.c
deleted file mode 100644
index 7974f1ca9..000000000
--- a/Projects/AVRISP/AVRISP.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2009.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, and distribute this software
-  and its documentation for any purpose and without fee is hereby
-  granted, provided that the above copyright notice appear in all
-  copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AVRISP project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "AVRISP.h"
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	V2Params_LoadNonVolatileParamValues();
-	
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
-	for (;;)
-	{
-		Process_AVRISP_Commands();
-		
-		V2Params_UpdateParamValues();
-		
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-
-	#if defined(ADC)
-	/* Initialize the ADC converter for VTARGET level detection on supported AVR models */
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
-	ADC_SetupChannel(VTARGET_ADC_CHANNEL);
-	ADC_StartReading(VTARGET_ADC_CHANNEL | ADC_RIGHT_ADJUSTED | ADC_REFERENCE_AVCC);
-	#endif
-	
-	/* Millisecond timer initialization for managing the command timeout counter */
-	OCR0A  = ((F_CPU / 64) / 1000);
-	TCCR0A = (1 << WGM01);
-	TCCR0B = ((1 << CS01) | (1 << CS00));
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	/* Indicate USB connected and ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	/* Setup AVRISP data Endpoints */
-	if (!(Endpoint_ConfigureEndpoint(AVRISP_DATA_EPNUM, EP_TYPE_BULK,
-		                             ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-}
-
-/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
-void Process_AVRISP_Commands(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	Endpoint_SelectEndpoint(AVRISP_DATA_EPNUM);
-	
-	/* Check to see if a V2 Protocol command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
-		V2Protocol_ProcessCommand();
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
-- 
cgit v1.2.3