From 31d7194252cdde340fa874c258e257312cb3ba8f Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 23 Dec 2009 14:45:47 +0000 Subject: Make seperate ISP, PDI and TPI folders in the AVRISP project Lib subdirectory to hold each protocol's files. --- Projects/AVRISP/Lib/ISP/ISPProtocol.c | 474 ++++++++++++++++++++++++++++++++++ 1 file changed, 474 insertions(+) create mode 100644 Projects/AVRISP/Lib/ISP/ISPProtocol.c (limited to 'Projects/AVRISP/Lib/ISP/ISPProtocol.c') diff --git a/Projects/AVRISP/Lib/ISP/ISPProtocol.c b/Projects/AVRISP/Lib/ISP/ISPProtocol.c new file mode 100644 index 000000000..e769cee8a --- /dev/null +++ b/Projects/AVRISP/Lib/ISP/ISPProtocol.c @@ -0,0 +1,474 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * ISP Protocol handler, to process V2 Protocol wrapped ISP commands used in Atmel programmer devices. + */ + +#include "ISPProtocol.h" + +#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__) + +/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on + * the attached device, returning success or failure back to the host. + */ +void ISPProtocol_EnterISPMode(void) +{ + struct + { + uint8_t TimeoutMS; + uint8_t PinStabDelayMS; + uint8_t ExecutionDelayMS; + uint8_t SynchLoops; + uint8_t ByteDelay; + uint8_t PollValue; + uint8_t PollIndex; + uint8_t EnterProgBytes[4]; + } Enter_ISP_Params; + + Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseStatus = STATUS_CMD_FAILED; + + CurrentAddress = 0; + + ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS); + SPI_Init(ISPTarget_GetSPIPrescalerMask() | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER); + + while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED)) + { + uint8_t ResponseBytes[4]; + + ISPTarget_ChangeTargetResetLine(true); + ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); + + for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) + { + ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay); + ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]); + } + + /* Check if polling disabled, or if the polled value matches the expected value */ + if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue)) + { + ResponseStatus = STATUS_CMD_OK; + } + else + { + ISPTarget_ChangeTargetResetLine(false); + ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); + } + } + + Endpoint_Write_Byte(CMD_ENTER_PROGMODE_ISP); + Endpoint_Write_Byte(ResponseStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */ +void ISPProtocol_LeaveISPMode(void) +{ + struct + { + uint8_t PreDelayMS; + uint8_t PostDelayMS; + } Leave_ISP_Params; + + Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + ISPProtocol_DelayMS(Leave_ISP_Params.PreDelayMS); + ISPTarget_ChangeTargetResetLine(false); + SPI_ShutDown(); + ISPProtocol_DelayMS(Leave_ISP_Params.PostDelayMS); + + Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes, + * words or pages of data to the attached device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ProgramMemory(uint8_t V2Command) +{ + struct + { + uint16_t BytesToWrite; + uint8_t ProgrammingMode; + uint8_t DelayMS; + uint8_t ProgrammingCommands[3]; + uint8_t PollValue1; + uint8_t PollValue2; + uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the + } Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting + + Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) - + sizeof(Write_Memory_Params.ProgData))); + + + Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite); + + if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData)) + { + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_FAILED); + Endpoint_ClearIN(); + return; + } + + Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ProgrammingStatus = STATUS_CMD_OK; + uint16_t PollAddress = 0; + uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 : + Write_Memory_Params.PollValue2; + uint8_t* NextWriteByte = Write_Memory_Params.ProgData; + + if (MustSetAddress) + { + if (CurrentAddress & (1UL << 31)) + ISPTarget_LoadExtendedAddress(); + + MustSetAddress = false; + } + + if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK) + { + uint16_t StartAddress = (CurrentAddress & 0xFFFF); + + /* Paged mode memory programming */ + for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + uint8_t ByteToWrite = *(NextWriteByte++); + + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; + else + Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + SPI_SendByte(ByteToWrite); + + if (!(PollAddress) && (ByteToWrite != PollValue)) + { + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; + + PollAddress = (CurrentAddress & 0xFFFF); + } + + if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) + CurrentAddress++; + } + + /* If the current page must be committed, send the PROGRAM PAGE command to the target */ + if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK) + { + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]); + SPI_SendByte(StartAddress >> 8); + SPI_SendByte(StartAddress & 0xFF); + SPI_SendByte(0x00); + + /* Check if polling is possible, if not switch to timed delay mode */ + if (!(PollAddress)) + { + Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_PAGED_VALUE_MASK; + Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK; + } + + ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, + Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); + } + } + else + { + /* Word/byte mode memory programming */ + for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + uint8_t ByteToWrite = *(NextWriteByte++); + + if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; + else + Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + SPI_SendByte(ByteToWrite); + + if (ByteToWrite != PollValue) + { + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; + + PollAddress = (CurrentAddress & 0xFFFF); + } + + if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) + CurrentAddress++; + + ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, + Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); + + if (ProgrammingStatus != STATUS_CMD_OK) + break; + } + } + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(ProgrammingStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes, + * words or pages of data from the attached device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ReadMemory(uint8_t V2Command) +{ + struct + { + uint16_t BytesToRead; + uint8_t ReadMemoryCommand; + } Read_Memory_Params; + + Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params)); + Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + + if (MustSetAddress) + { + if (CurrentAddress & (1UL << 31)) + ISPTarget_LoadExtendedAddress(); + + MustSetAddress = false; + } + + for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + + if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) + Read_Memory_Params.ReadMemoryCommand |= READ_WRITE_HIGH_BYTE_MASK; + else + Read_Memory_Params.ReadMemoryCommand &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Read_Memory_Params.ReadMemoryCommand); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + Endpoint_Write_Byte(SPI_ReceiveByte()); + + /* Check if the endpoint bank is currently full */ + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + Endpoint_WaitUntilReady(); + } + + if ((IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) || (V2Command == CMD_READ_EEPROM_ISP)) + CurrentAddress++; + } + + Endpoint_Write_Byte(STATUS_CMD_OK); + + bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); + Endpoint_ClearIN(); + + /* Ensure last packet is a short packet to terminate the transfer */ + if (IsEndpointFull) + { + Endpoint_WaitUntilReady(); + Endpoint_ClearIN(); + Endpoint_WaitUntilReady(); + } +} + +/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */ +void ISPProtocol_ChipErase(void) +{ + struct + { + uint8_t EraseDelayMS; + uint8_t PollMethod; + uint8_t EraseCommandBytes[4]; + } Erase_Chip_Params; + + Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseStatus = STATUS_CMD_OK; + + for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++) + SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]); + + if (!(Erase_Chip_Params.PollMethod)) + ISPProtocol_DelayMS(Erase_Chip_Params.EraseDelayMS); + else + ResponseStatus = ISPTarget_WaitWhileTargetBusy(); + + Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP); + Endpoint_Write_Byte(ResponseStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands, + * reading the requested configuration byte from the device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) +{ + struct + { + uint8_t RetByte; + uint8_t ReadCommandBytes[4]; + } Read_FuseLockSigOSCCAL_Params; + + Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseBytes[4]; + + for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) + ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration + * byte to the device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_WriteFuseLock(uint8_t V2Command) +{ + struct + { + uint8_t WriteCommandBytes[4]; + } Write_FuseLockSig_Params; + + Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++) + SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */ +void ISPProtocol_SPIMulti(void) +{ + struct + { + uint8_t TxBytes; + uint8_t RxBytes; + uint8_t RxStartAddr; + uint8_t TxData[255]; + } SPI_Multi_Params; + + Endpoint_Read_Stream_LE(&SPI_Multi_Params, sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)); + Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(CMD_SPI_MULTI); + Endpoint_Write_Byte(STATUS_CMD_OK); + + uint8_t CurrTxPos = 0; + uint8_t CurrRxPos = 0; + + /* Write out bytes to transmit until the start of the bytes to receive is met */ + while (CurrTxPos < SPI_Multi_Params.RxStartAddr) + { + if (CurrTxPos < SPI_Multi_Params.TxBytes) + SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]); + else + SPI_SendByte(0); + + CurrTxPos++; + } + + /* Transmit remaining bytes with padding as needed, read in response bytes */ + while (CurrRxPos < SPI_Multi_Params.RxBytes) + { + if (CurrTxPos < SPI_Multi_Params.TxBytes) + Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++])); + else + Endpoint_Write_Byte(SPI_ReceiveByte()); + + CurrRxPos++; + } + + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +#endif \ No newline at end of file -- cgit v1.2.3