From 802910d49f2ac175b06a8ebfbcb61551a171b85a Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 12 May 2012 15:32:53 +0000 Subject: AppConfigHeaders: Update several additional user projects to use configuration header files, rather than makefile defines. Remove compile time warnings for projects lacking device serial support, remove incomplete StandaloneProgrammer project. --- Projects/USBtoSerial/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++++++++ Projects/USBtoSerial/Descriptors.c | 11 ---- Projects/USBtoSerial/makefile | 11 +--- 3 files changed, 95 insertions(+), 20 deletions(-) create mode 100644 Projects/USBtoSerial/Config/LUFAConfig.h (limited to 'Projects/USBtoSerial') diff --git a/Projects/USBtoSerial/Config/LUFAConfig.h b/Projects/USBtoSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/USBtoSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/USBtoSerial/Descriptors.c b/Projects/USBtoSerial/Descriptors.c index b7aa48cb4..2b4bb4ceb 100644 --- a/Projects/USBtoSerial/Descriptors.c +++ b/Projects/USBtoSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile index 17919d97e..90c335775 100644 --- a/Projects/USBtoSerial/makefile +++ b/Projects/USBtoSerial/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -172,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. -- cgit v1.2.3