From 3a03da970558de9211fc1a43b12bf69e38854d09 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 10 Oct 2010 06:23:45 +0000 Subject: Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules. --- Projects/XPLAINBridge/Lib/SoftUART.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'Projects/XPLAINBridge/Lib/SoftUART.c') diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c index b96b45f4d..12fdf96bc 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.c +++ b/Projects/XPLAINBridge/Lib/SoftUART.c @@ -67,11 +67,11 @@ void SoftUART_Init(void) SoftUART_SetBaud(9600); /* Setup reception timer compare ISR */ - TIMSK1 = (1 << OCIE1A); + TIMSK1 = (1 << ICIE1); /* Setup transmission timer compare ISR and start the timer */ - TIMSK3 = (1 << OCIE3A); - TCCR3B = ((1 << CS30) | (1 << WGM32)); + TIMSK3 = (1 << ICIE3); + TCCR3B = ((1 << CS30) | (1 << WGM33) | (1 << WGM32)); } /** ISR to detect the start of a bit being sent to the software UART. */ @@ -90,12 +90,12 @@ ISR(INT0_vect, ISR_BLOCK) EIMSK = 0; /* Start the reception timer */ - TCCR1B = ((1 << CS10) | (1 << WGM12)); + TCCR1B = ((1 << CS10) | (1 << WGM13) | (1 << WGM12)); } } /** ISR to manage the reception of bits to the software UART. */ -ISR(TIMER1_COMPA_vect, ISR_BLOCK) +ISR(TIMER1_CAPT_vect, ISR_BLOCK) { /* Cache the current RX pin value for later checking */ uint8_t SRX_Cached = (SRXPIN & (1 << SRX)); @@ -120,12 +120,12 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK) /* Reception complete, store the received byte if stop bit valid */ if (SRX_Cached) - RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data); + RingBuffer_Insert(&XMEGAtoUSB_Buffer, RX_Data); } } /** ISR to manage the transmission of bits via the software UART. */ -ISR(TIMER3_COMPA_vect, ISR_BLOCK) +ISR(TIMER3_CAPT_vect, ISR_BLOCK) { /* Check if transmission has finished */ if (TX_BitsRemaining) @@ -140,13 +140,13 @@ ISR(TIMER3_COMPA_vect, ISR_BLOCK) TX_Data >>= 1; TX_BitsRemaining--; } - else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoUART_Buffer))) + else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoXMEGA_Buffer))) { /* Start bit - TX line low */ STXPORT &= ~(1 << STX); /* Transmission complete, get the next byte to send (if available) */ - TX_Data = ~RingBuffer_Remove(&USBtoUART_Buffer); + TX_Data = ~RingBuffer_Remove(&USBtoXMEGA_Buffer); TX_BitsRemaining = 9; } } -- cgit v1.2.3