From b1625400998819846288e02a780b2b5ab14da143 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 30 Jun 2011 12:27:01 +0000 Subject: Minor documentation fix for the RelayBoard project. --- Projects/RelayBoard/RelayBoard.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Projects') diff --git a/Projects/RelayBoard/RelayBoard.txt b/Projects/RelayBoard/RelayBoard.txt index 1becfbb9f..ce84c27ea 100644 --- a/Projects/RelayBoard/RelayBoard.txt +++ b/Projects/RelayBoard/RelayBoard.txt @@ -50,8 +50,8 @@ * * Relays 1 to 4 are respectively wired to pins C4, C5, C6 and C7 of the Teensy++ V2, * which are the PORTC bits 4 to 7 of the AT90USB1286. The relays MUST be wired through - * a transistor, and a diode must be added on the relay's contact pins to protect - * the transistor from back EMF generated from the relay when the coil is turned off. + * a transistor, and a diode must be added in antiparallel on the relay's coil pins to + * protect the transistor from back EMF generated from the relay when the coil is turned off. * The transistor base pin is wired to the Teensy data port through a 10K resistor. A * LED may be also be added as a relay status indicator on each channel. * -- cgit v1.2.3