/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Combined Mass Storage and Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs * - Series 6 USB AVRs * - Series 4 USB AVRs * - Series 2 USB AVRs * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Classes:Mass Storage DeviceHuman Interface Device
USB Subclasses:Bulk-Only TransportKeyboard Subclass
Relevant Standards:USBIF Mass Storage StandardUSB Bulk-Only Transport StandardSCSI Primary Commands SpecificationSCSI Block Commands SpecificationUSBIF HID Specification, USBIF HID Usage Tables
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * Combined Mass Storage and Keyboard demonstration application. This gives a * simple reference application for implementing a dual class USB Mass Storage * and USB HID Keyboard device using the basic USB UFI and HID drivers in all * modern OSes (i.e. no special drivers required). * * On start-up the system will automatically enumerate and function as an * external mass storage device (which may be formatted and used in the same * manner as commercial USB Mass Storage devices) and a USB keyboard. * * You will need to format the mass storage drive upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. * * Keys on the USB keyboard can be pressed by moving the board's Joystick. * * The USB control endpoint is managed entirely by the library using endpoint * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for * the host to reset the Mass Storage device state during long transfers without * the need for complicated polling logic. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * *
Define Name:Location:Description:
TOTAL_LUNSMassStorage.hTotal number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive * - this can be set to any positive non-zero amount.
*/