/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* - Series 7 USB AVRs (AT90USBxxx7)
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
*
*
* USB Mode: |
* Device |
*
*
* USB Class: |
* Communications Device Class (CDC) \n
* Mass Storage Device |
*
*
* USB Subclass: |
* Abstract Control Model (ACM) \n
* Bulk-Only Transport |
*
*
* Relevant Standards: |
* USBIF CDC Class Standard \n
* USBIF Mass Storage Standard \n
* USB Bulk-Only Transport Standard \n
* SCSI Primary Commands Specification \n
* SCSI Block Commands Specification |
*
*
* Usable Speeds: |
* Full Speed Mode |
*
*
*
* \section Sec_Description Project Description:
*
* Combined Communications Device Class/Mass Storage demonstration application.
* This gives a simple reference application for implementing a combined
* CDC and Mass Storage device acting as a both a virtual serial port and a flash
* drive. Joystick actions are transmitted to the host as strings, and data can be
* written to or read from the exposed flash drive interface in the same manner as
* other USB flash drives. The device does not respond to serial data sent from the
* host.
*
* After running this demo for the first time on a new computer,
* you will need to supply the .INF file located in this demo
* project's directory as the device's driver when running under
* Windows. This will enable Windows to use its inbuilt CDC drivers,
* negating the need for custom drivers for the device. Other
* Operating Systems should automatically use their own inbuilt
* CDC-ACM drivers.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
*
*
* Define Name: |
* Location: |
* Description: |
*
*
* TOTAL_LUNS |
* MassStorage.h |
* Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount. |
*
*
*/