/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage MIDI Input Device Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * \li Series 6 USB AVRs (AT90USBxxx6) * \li Series 4 USB AVRs (ATMEGAxxU4) * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) * \li Series B XMEGA AVRs (ATXMEGAxxxBxU) * \li Series C XMEGA AVRs (ATXMEGAxxxCxU) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Audio Class
USB Subclass:Standard Audio Device
Relevant Standards:USBIF Audio Class Specification \n * USB-MIDI Audio Class Extension Specification \n * General MIDI Specification
Supported USB Speeds:Full Speed Mode
* * \section Sec_Description Project Description: * * MIDI demonstration application. This gives a simple reference * application for implementing the USB-MIDI class in USB devices. * It is built upon the USB Audio class. * * Joystick movements are translated into note on/off messages and * are sent to the host PC as MIDI streams which can be read by any * MIDI program supporting MIDI IN devices. * * If the HWB is not pressed, channel 1 (default piano) is used. If * the HWB is set, then channel 10 (default percussion) is selected. * * This device implements MIDI-THRU mode, with the IN MIDI data being * generated by the device itself. OUT MIDI data is discarded. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * *
* None *
*/