diff options
author | inmarket <andrewh@inmarket.com.au> | 2013-10-28 20:04:03 +1000 |
---|---|---|
committer | inmarket <andrewh@inmarket.com.au> | 2013-10-28 20:04:03 +1000 |
commit | 555257933af6e7e3b106ac3589520b5dad45061b (patch) | |
tree | b2c2cd148855bc20ebb476e62e0fa39ed1efbab0 /boards/addons/gdisp/board_SSD1289_stm32f4discovery.h | |
parent | dc2d5be60625dc03f0982d61a55dd3ccf844fff5 (diff) | |
download | uGFX-555257933af6e7e3b106ac3589520b5dad45061b.tar.gz uGFX-555257933af6e7e3b106ac3589520b5dad45061b.tar.bz2 uGFX-555257933af6e7e3b106ac3589520b5dad45061b.zip |
Clean up the driver directory structure by moving all board specific files into the boards sub-structure.
Diffstat (limited to 'boards/addons/gdisp/board_SSD1289_stm32f4discovery.h')
-rw-r--r-- | boards/addons/gdisp/board_SSD1289_stm32f4discovery.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h new file mode 100644 index 00000000..866311dc --- /dev/null +++ b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h @@ -0,0 +1,172 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +/** + * @file drivers/gdisp/SSD1289/board_SSD1289_stm32f4discovery.h + * @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display. + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +// For a multiple display configuration we would put all this in a structure and then +// set g->board to that structure. +#define GDISP_REG ((volatile uint16_t *) 0x60000000)[0] /* RS = 0 */ +#define GDISP_RAM ((volatile uint16_t *) 0x60020000)[0] /* RS = 1 */ +#define GDISP_DMA_STREAM STM32_DMA2_STREAM6 +#define FSMC_BANK 0 + +/* PWM configuration structure. We use timer 3 channel 3 */ +static const PWMConfig pwmcfg = { + 100000, /* 100 kHz PWM clock frequency. */ + 100, /* PWM period is 100 cycles. */ + NULL, + { + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0 +}; + +static inline void init_board(GDisplay *g) { + + // As we are not using multiple displays we set g->board to NULL as we don't use it. + g->board = 0; + + switch(g->controllerdisplay) { + case 0: // Set up for Display 0 + /** + * Performs the following functions: + * 1. initialise the io port used by the display + * 2. initialise the reset pin (initial state not-in-reset) + * 3. initialise the chip select pin (initial state not-active) + * 4. initialise the backlight pin (initial state back-light off) + */ + + #if defined(STM32F1XX) || defined(STM32F3XX) + /* FSMC setup for F1/F3 */ + rccEnableAHB(RCC_AHBENR_FSMCEN, 0); + + #if defined(GDISP_USE_DMA) + #error "GDISP: SSD1289 - DMA not implemented for F1/F3 Devices" + #endif + #elif defined(STM32F4XX) || defined(STM32F2XX) + /* STM32F2-F4 FSMC init */ + rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0); + + #if defined(GDISP_USE_DMA) + if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) gfxExit(); + dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + #else + #warning "GDISP: SSD1289 - DMA is supported for F2/F4 Devices. Define GDISP_USE_DMA in your gfxconf.h to turn this on for better performance." + #endif + #else + #error "GDISP: SSD1289 - FSMC not implemented for this device" + #endif + + /* set pins to FSMC mode */ + IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) | + (1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0}; + + IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) | + (1 << 13) | (1 << 14) | (1 << 15), 0}; + + palSetBusMode(&busD, PAL_MODE_ALTERNATE(12)); + palSetBusMode(&busE, PAL_MODE_ALTERNATE(12)); + + /* FSMC timing */ + FSMC_Bank1->BTCR[FSMC_BANK+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ; + + /* Bank1 NOR/SRAM control register configuration + * This is actually not needed as already set by default after reset */ + FSMC_Bank1->BTCR[FSMC_BANK] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN; + + /* Display backlight control */ + /* TIM3 is an alternate function 2 (AF2) */ + pwmStart(&PWMD3, &pwmcfg); + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATE(2)); + pwmEnableChannel(&PWMD3, 2, 100); + break; + } +} + +static inline void post_init_board(GDisplay *g) { + (void) g; +} + +static inline void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + (void) state; +} + +static inline void set_backlight(GDisplay *g, uint8_t percent) { + (void) g; + pwmEnableChannel(&PWMD3, 2, percent); +} + +static inline void acquire_bus(GDisplay *g) { + (void) g; +} + +static inline void release_bus(GDisplay *g) { + (void) g; +} + +static inline void write_index(GDisplay *g, uint16_t index) { + (void) g; + GDISP_REG = index; +} + +static inline void write_data(GDisplay *g, uint16_t data) { + (void) g; + GDISP_RAM = data; +} + +static inline void setreadmode(GDisplay *g) { + (void) g; + FSMC_Bank1->BTCR[FSMC_BANK+1] = FSMC_BTR1_ADDSET_3 | FSMC_BTR1_DATAST_3 | FSMC_BTR1_BUSTURN_0; /* FSMC timing */ +} + +static inline void setwritemode(GDisplay *g) { + (void) g; + FSMC_Bank1->BTCR[FSMC_BANK+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0; /* FSMC timing */ +} + +static inline uint16_t read_data(GDisplay *g) { + (void) g; + return GDISP_RAM; +} + +#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__) + static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) { + (void) g; + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } + + static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) { + (void) g; + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } +#endif + +#endif /* _GDISP_LLD_BOARD_H */ + |