diff options
author | Joel Bodenmann <joel@unormal.org> | 2013-11-10 22:40:20 +0100 |
---|---|---|
committer | Joel Bodenmann <joel@unormal.org> | 2013-11-10 22:40:20 +0100 |
commit | 83482a3b8a557b12c22e6bc17d8eac1a2c3ca1c1 (patch) | |
tree | 214b91eea15ee8a17c3143ac3ae9756c3449dbed /boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h | |
parent | 16c021e5b35a83b2fab523a83517da189c6780e1 (diff) | |
download | uGFX-83482a3b8a557b12c22e6bc17d8eac1a2c3ca1c1.tar.gz uGFX-83482a3b8a557b12c22e6bc17d8eac1a2c3ca1c1.tar.bz2 uGFX-83482a3b8a557b12c22e6bc17d8eac1a2c3ca1c1.zip |
added forgotten files
Diffstat (limited to 'boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h')
-rw-r--r-- | boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h b/boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h new file mode 100644 index 00000000..c6d3d040 --- /dev/null +++ b/boards/base/Embest-STM32-DMSTF4BB/board_SSD2119.h @@ -0,0 +1,168 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +// For a multiple display configuration we would put all this in a structure and then +// set g->board to that structure. + +/* Using FSMC A19 (PE3) as DC */ +#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* DC = 0 */ +#define GDISP_RAM (*((volatile uint16_t *) 0x60100000)) /* DC = 1 */ +#define GDISP_DMA_STREAM STM32_DMA2_STREAM6 + +#define SET_RST palSetPad(GPIOD, 3); +#define CLR_RST palClearPad(GPIOD, 3); + +/* + * PWM configuration structure. We use timer 4 channel 2 (orange LED on board). + * The reason for so high clock is that with any lower, onboard coil is squeaking. + * The major disadvantage of this clock is a lack of linearity between PWM duty + * cycle width and brightness. In fact only with low preset one sees any change + * (eg. duty cycle between 1-20). Feel free to adjust this, maybe only my board + * behaves like this. According to the G5126 datesheet (backlight LED driver) + * the PWM frequency should be somewhere between 200 Hz to 200 kHz. + */ +static const PWMConfig pwmcfg = { + 1000000, /* 1 MHz PWM clock frequency. */ + 100, /* PWM period is 100 cycles. */ + NULL, + { + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL} + }, + 0 +}; + +static inline void init_board(GDisplay *g) { + + // As we are not using multiple displays we set g->board to NULL as we don't use it. + g->board = 0; + + switch(g->controllerdisplay) { + case 0: // Set up for Display 0 + #if defined(STM32F4XX) || defined(STM32F2XX) + /* STM32F4 FSMC init */ + rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0); + + #if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM) + if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) + gfxExit(); + dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + #endif + #else + #error "FSMC not implemented for this device" + #endif + + /* Group pins */ + IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) | + (1 << 9) | (1 << 10) | (1 << 14) | (1 << 15), 0}; + + IOBus busE = {GPIOE, (1 << 3) | (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) | + (1 << 13) | (1 << 14) | (1 << 15), 0}; + + /* FSMC is an alternate function 12 (AF12) */ + palSetBusMode(&busD, PAL_MODE_ALTERNATE(12)); + palSetBusMode(&busE, PAL_MODE_ALTERNATE(12)); + + /* FSMC timing register configuration */ + FSMC_Bank1->BTCR[0 + 1] = (FSMC_BTR1_ADDSET_2 | FSMC_BTR1_ADDSET_1) \ + | (FSMC_BTR1_DATAST_2 | FSMC_BTR1_DATAST_1) \ + | FSMC_BTR1_BUSTURN_0; + + /* Bank1 NOR/PSRAM control register configuration + * Write enable, memory databus width set to 16 bit, memory bank enable */ + FSMC_Bank1->BTCR[0] = FSMC_BCR1_WREN | FSMC_BCR1_MWID_0 | FSMC_BCR1_MBKEN; + + /* Display backlight control */ + /* TIM4 is an alternate function 2 (AF2) */ + pwmStart(&PWMD4, &pwmcfg); + palSetPadMode(GPIOD, 13, PAL_MODE_ALTERNATE(2)); + pwmEnableChannel(&PWMD4, 1, 100); + break; + } +} + +static inline void post_init_board(GDisplay *g) { + (void) g; +} + +static inline void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + CLR_RST; + } else { + SET_RST; + } +} + +static inline void set_backlight(GDisplay *g, uint8_t percent) { + (void) g; + pwmEnableChannel(&PWMD4, 1, percent); +} + +static inline void acquire_bus(GDisplay *g) { + (void) g; +} + +static inline void release_bus(GDisplay *g) { + (void) g; +} + +static inline void write_index(GDisplay *g, uint16_t index) { + (void) g; + GDISP_REG = index; +} + +static inline void write_data(GDisplay *g, uint16_t data) { + (void) g; + GDISP_RAM = data; +} + +static inline void setreadmode(GDisplay *g) { + (void) g; +} + +static inline void setwritemode(GDisplay *g) { + (void) g; +} + +static inline uint16_t read_data(GDisplay *g) { + (void) g; + return GDISP_RAM; +} + +#if defined(GDISP_USE_DMA) + static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) { + (void) g; + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } + + static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) { + (void) g; + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } +#endif + +#endif /* _GDISP_LLD_BOARD_H */ + |