diff options
author | inmarket <andrewh@inmarket.com.au> | 2014-11-15 15:17:28 +1000 |
---|---|---|
committer | inmarket <andrewh@inmarket.com.au> | 2014-11-15 15:17:28 +1000 |
commit | 0d90611c824b33c8df2da06e1d02c7cda11022be (patch) | |
tree | 9634f796f70a34f2f6420aec10c0b84953d58cf4 /drivers/gdisp/SSD1963 | |
parent | ebf647b63a69b811b3144aa0740994e1ac073783 (diff) | |
download | uGFX-0d90611c824b33c8df2da06e1d02c7cda11022be.tar.gz uGFX-0d90611c824b33c8df2da06e1d02c7cda11022be.tar.bz2 uGFX-0d90611c824b33c8df2da06e1d02c7cda11022be.zip |
SSD1963 driver updates originally by steved
Diffstat (limited to 'drivers/gdisp/SSD1963')
-rw-r--r-- | drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c | 193 |
1 files changed, 103 insertions, 90 deletions
diff --git a/drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c b/drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c index f465b47d..5c20d3d6 100644 --- a/drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c +++ b/drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c @@ -16,7 +16,6 @@ #define CALC_PERIOD(w,b,f,p) (p+b+w+f) #define CALC_FPR(w,h,hb,hf,hp,vb,vf,vp,fps) ((fps * CALC_PERIOD(w,hb,hf,hp) * CALC_PERIOD(h,vb,vf,vp) * 1048576)/100000000) - typedef struct LCD_Parameters { coord_t width, height; // Panel width and height uint16_t hbporch; // Horizontal Back Porch @@ -45,9 +44,6 @@ typedef struct LCD_Parameters { /* Set the lcd panel interface type */ // default TFT mode #define LCD_PANEL_TYPE_SERIAL_RGB_MODE ((1<<6) << 8) // Serial RGB mode #define LCD_PANEL_TYPE_SERIAL_RGB_DUMMY_MODE (((1<<5) | (1<<6)) << 8) // Serial RGB+dummy mode - - - } LCD_Parameters; #include "board_SSD1963.h" @@ -56,11 +52,14 @@ typedef struct LCD_Parameters { /* Driver local definitions. */ /*===========================================================================*/ +#ifndef GDISP_SSD1963_NO_INIT + #define GDISP_SSD1963_NO_INIT FALSE +#endif #ifndef GDISP_INITIAL_CONTRAST #define GDISP_INITIAL_CONTRAST 50 #endif #ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 90 + #define GDISP_INITIAL_BACKLIGHT 100 #endif /*===========================================================================*/ @@ -72,9 +71,9 @@ typedef struct LCD_Parameters { #define dummy_read(g) { volatile uint16_t dummy; dummy = read_data(g); (void) dummy; } #define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); } #define write_data16(g, data) { write_data(g, (data)>>8); write_data(g, (data) & 0xFF); } +#define read_reg(g, reg) { write_index(g, reg); read_data(g); } static inline void set_viewport(GDisplay* g) { - switch(g->g.Orientation) { default: case GDISP_ROTATE_0: @@ -114,47 +113,49 @@ static inline void set_viewport(GDisplay* g) { write_index(g, SSD1963_WRITE_MEMORY_START); break; } - - - - } /** * The backlight is controlled by the controller. + * percent - the value 0..100 for brightness (duty cycle) + * + * Backlight appears to be forced off (by chip) when display blanked */ static inline void set_backlight(GDisplay *g, uint8_t percent) { - //duty_cycle is 00..FF - //Work in progress: the SSD1963 has a built-in PWM, its output can - //be used by a Dynamic Background Control or by a host (user) - //Check your LCD's hardware, the PWM connection is default left open and instead - //connected to a LED connection on the breakout board + // The SSD1963 has a built-in PWM (duty_cycle 00..FF). + // Its output can be used by a Dynamic Background Control or by a host (user) + // Check your LCD's hardware, the PWM connection is default left open and instead + // connected to a LED connection on the breakout board + write_index(g, SSD1963_SET_PWM_CONF); //set PWM for BackLight - write_data(g, 4); // PWMF[7:0] = 4, - // PWM signal frequency = PLL clock / (256 * (PWMF[7:0] + 1)) / 256 - // = aprox 366Hz for a PLL freq = 120MHz - if ( percent==0xFF ) // use percent==0xFF to turn off SSD1963 pwm in power SLEEP or DEEP SLEEP mode + write_data(g, 0x01); + // write_data(g, 0x0E); // PWMF[7:0] = 2, PWM base freq = PLL/(256*(1+5))/256 = 300Hz for a PLL freq = 120MHz (source: Displaytech) + if (percent == 0xFF) // use percent==0xFF to turn off SSD1963 pwm in power SLEEP or DEEP SLEEP mode write_data(g, 0x00); + else if (percent >= 100) + write_data(g, 0x00FF); // Fully on for any percentage >= 100 else - write_data(g, (55+percent*2) & 0x00FF); - write_data(g, 0x01); // controlled by host (not DBC), enabled - write_data(g, 0x00); // DBC manual brightness; Set the brightness level: 00 Dimmest, FF Brightest - write_data(g, 0x00); // DBC minimum brightness; Set the minimum brightness level: 00 Dimmest, FF Brightest - write_data(g, 0x00); // Brightness prescaler of Transition Effect; Set the brightness prescaler: 0 Dimmest, F Brightest - + write_data(g, (percent*255)/100 & 0x00FF); + write_data(g, 0x01); // Controlled by host (not DBC), enabled + write_data(g, 0xFF); // DBC manual brightness (not used - zero would work) + write_data(g, 0x60); // DBC minimum brightness (not used - zero would work) + write_data(g, 0x0F); // Brightness prescaler - active when Transition Effect enable A5 = 1 } /*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { LCD_Parameters * lcdp; +/* + * Some displays (e.g. Displaytech) have an on-board setup process which just requires that we don't touch anything for a time after power up. + * For this type of display define GDISP_SSD1963_NO_INIT as TRUE, and implement an appropriate delay in the board file. + * With such displays we can skip most of the initialisation. We also skip pulsing the reset pin, since it + * will introduce an extra second or so of display to the startup time. + */ + // The private area for this controller is the LCD timings lcdp = (void *)&DisplayTimings[g->controllerdisplay]; g->priv = lcdp; @@ -162,68 +163,79 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { // Initialise the board interface init_board(g); - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); + #if !GDISP_SSD1963_NO_INIT + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + #endif // Get the bus for the following initialisation commands acquire_bus(g); - - write_index(g, SSD1963_SOFT_RESET); - gfxSleepMilliseconds(5); - - /* Driver PLL config */ - write_index(g, SSD1963_SET_PLL_MN); - write_data(g, 35); // PLLclk = REFclk (10Mhz) * 36 (360Mhz) - write_data(g, 2); // SYSclk = PLLclk / 3 (120MHz) - write_data(g, 4); // Apply calculation bit, else it is ignored - write_reg(g, SSD1963_SET_PLL, 0x01); // Enable PLL - gfxSleepMilliseconds(5); - write_reg(g, SSD1963_SET_PLL, 0x03); // Use PLL - gfxSleepMilliseconds(5); - write_index(g, SSD1963_SOFT_RESET); - gfxSleepMilliseconds(5); - - /* LCD panel parameters */ - write_index(g, SSD1963_SET_GDISP_MODE); - write_data(g, lcdp->flags & 0xFF); - write_data(g, (lcdp->flags >> 8) & 0xFF); - write_data16(g, lcdp->width-1); - write_data16(g, lcdp->height-1); - write_data(g, 0x00); // RGB + + #if !GDISP_SSD1963_NO_INIT + write_index(g, SSD1963_SOFT_RESET); // Software reset - clears almost everything (apart from PLL) + gfxSleepMilliseconds(5); + + /* Driver PLL config */ + write_index(g, SSD1963_SET_PLL_MN); + write_data(g, 35); // PLLclk = REFclk (10Mhz) * 36 (360Mhz) + write_data(g, 2); // SYSclk = PLLclk / 3 (120MHz) + write_data(g, 4); // Apply calculation bit, else it is ignored + write_reg(g, SSD1963_SET_PLL, 0x01); // Enable PLL + gfxSleepMilliseconds(5); + write_reg(g, SSD1963_SET_PLL, 0x03); // Use PLL + gfxSleepMilliseconds(5); + write_index(g, SSD1963_SOFT_RESET); // Software reset - clears almost everything (apart from PLL) + gfxSleepMilliseconds(5); + + /* LCD panel parameters */ + write_index(g, SSD1963_SET_GDISP_MODE); + write_data(g, lcdp->flags & 0xFF); + write_data(g, (lcdp->flags >> 8) & 0xFF); + //** write_data(g, 0x18); //Enabled dithering + //** write_data(g, 0x00); + write_data16(g, lcdp->width-1); + write_data16(g, lcdp->height-1); + write_data(g, 0x00); // RGB - line sequences for serial TFT + #endif + + // From Displaytech example - for larger horizontal resolutions - not sure if display-specific + if (lcdp->width >= 640) + write_reg(g, SSD1963_SET_ADDRESS_MODE, 2); // Flip horizontal direction write_reg(g, SSD1963_SET_PIXEL_DATA_INTERFACE, SSD1963_PDI_16BIT565); - /* LCD Clock specs */ - write_index(g, SSD1963_SET_LSHIFT_FREQ); - write_data(g, (lcdp->fpr >> 16) & 0xFF); - write_data(g, (lcdp->fpr >> 8) & 0xFF); - write_data(g, lcdp->fpr & 0xFF); - - write_index(g, SSD1963_SET_HORI_PERIOD); - write_data16(g, lcdp->hperiod); - write_data16(g, lcdp->hpulse + lcdp->hbporch); - write_data(g, lcdp->hpulse); - write_data(g, 0x00); - write_data(g, 0x00); - write_data(g, 0x00); - - write_index(g, SSD1963_SET_VERT_PERIOD); - write_data16(g, lcdp->vperiod); - write_data16(g, lcdp->vpulse + lcdp->vbporch); - write_data(g, lcdp->vpulse); - write_data(g, 0x00); - write_data(g, 0x00); + #if !GDISP_SSD1963_NO_INIT + /* LCD Clock specs */ + write_index(g, SSD1963_SET_LSHIFT_FREQ); + write_data(g, (lcdp->fpr >> 16) & 0xFF); + write_data(g, (lcdp->fpr >> 8) & 0xFF); + write_data(g, lcdp->fpr & 0xFF); + + write_index(g, SSD1963_SET_HORI_PERIOD); + write_data16(g, lcdp->hperiod); + write_data16(g, lcdp->hpulse + lcdp->hbporch); + write_data(g, lcdp->hpulse); + write_data(g, 0x00); + write_data(g, 0x00); + write_data(g, 0x00); + + write_index(g, SSD1963_SET_VERT_PERIOD); + write_data16(g, lcdp->vperiod); + write_data16(g, lcdp->vpulse + lcdp->vbporch); + write_data(g, lcdp->vpulse); + write_data(g, 0x00); + write_data(g, 0x00); + #endif /* Tear effect indicator ON. This is used to tell the host MCU when the driver is not refreshing the panel (during front/back porch) */ write_reg(g, SSD1963_SET_TEAR_ON, 0x00); - /* Turn on */ write_index(g, SSD1963_SET_DISPLAY_ON); - + /* Turn on the back-light */ set_backlight(g, GDISP_INITIAL_BACKLIGHT); @@ -265,32 +277,33 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { switch((powermode_t)g->p.ptr) { case powerOff: acquire_bus(g); + write_index(g, SSD1963_EXIT_SLEEP_MODE); + gfxSleepMilliseconds(5); + write_index(g, SSD1963_SET_DISPLAY_OFF); + write_index(g, SSD1963_SET_DEEP_SLEEP); release_bus(g); break; case powerOn: acquire_bus(g); dummy_read(g); dummy_read(g); - /* Wait for 1msec to let the PLL stable if was stopped by deep sleep mode */ - gfxSleepMilliseconds(100); - write_index(g, SSD1963_EXIT_SLEEP_MODE); - gfxSleepMilliseconds(5); - /* Restore the back-light */ - set_backlight(g, gdispGGetBacklight(g)); + + gfxSleepMilliseconds(100); // Wait for 1msec to let the PLL stable if was stopped by deep sleep mode + write_index(g, SSD1963_EXIT_SLEEP_MODE); // need this in case we were in 'normal' sleep mode + gfxSleepMilliseconds(5); + set_backlight(g, gdispGGetBacklight(g)); // Restore the back-light release_bus(g); break; case powerSleep: acquire_bus(g); - /* Turn off the back-light pwm from SSD1963 */ - set_backlight(g, 0xFF); + set_backlight(g, 0xFF); // Turn off the back-light pwm from SSD1963 write_index(g, SSD1963_ENTER_SLEEP_MODE); gfxSleepMilliseconds(5); release_bus(g); break; case powerDeepSleep: acquire_bus(g); - /* Turn off the back-light pwm from SSD1963 */ - set_backlight(g, 0xFF); + set_backlight(g, 0xFF); // Turn off the back-light pwm from SSD1963 write_index(g, SSD1963_ENTER_SLEEP_MODE); write_index(g, SSD1963_SET_DEEP_SLEEP); release_bus(g); @@ -350,7 +363,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { g->g.Backlight = (unsigned)g->p.ptr; return; - //case GDISP_CONTROL_CONTRAST: + //case GDISP_CONTROL_CONTRAST: - see DDS1963_SET_POST_PROC command - contrast, brightness, saturation default: return; } |