diff options
Diffstat (limited to 'boards/base')
10 files changed, 2618 insertions, 0 deletions
diff --git a/boards/base/STM32F439i-Eval/CubeHal/board.mk b/boards/base/STM32F439i-Eval/CubeHal/board.mk new file mode 100644 index 00000000..a3bb8ad2 --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/board.mk @@ -0,0 +1,30 @@ +GFXINC += $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL +GFXSRC += $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm324x9i_eval_sdram.c + +ifeq ($(OPT_OS),raw32) + GFXDEFS += STM32F439xx + GFXSRC += $(STMHAL)/Src/stm32f4xx_hal.c \ + $(STMHAL)/Src/stm32f4xx_hal_cortex.c \ + $(STMHAL)/Src/stm32f4xx_hal_rcc.c \ + $(STMHAL)/Src/stm32f4xx_hal_rcc_ex.h \ + $(STMHAL)/Src/stm32f4xx_hal_gpio.c \ + $(STMHAL)/Src/stm32f4xx_hal_pwr.c \ + $(STMHAL)/Src/stm32f4xx_hal_pwr_ex.c \ + $(STMHAL)/Src/stm32f4xx_hal_sdram.c \ + $(STMHAL)/Src/stm32f4xx_hal_dma.c \ + $(STMHAL)/Src/stm32f4xx_hal_ltdc.c \ + $(STMHAL)/Src/stm32f4xx_hal_i2c.c \ + $(STMHAL)/Src/stm32f4xx_ll_fmc.c + GFXSRC += $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm32f439i_raw32_startup.s \ + $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm32f439i_raw32_ugfx.c \ + $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm32f439i_raw32_system.c \ + $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm32f439i_raw32_interrupts.c + GFXDEFS += GFX_OS_PRE_INIT_FUNCTION=Raw32OSInit GFX_OS_INIT_NO_WARNING=TRUE + GFXINC += $(CMSIS)/Device/ST/STM32F4xx/Include \ + $(CMSIS)/Include \ + $(STMHAL)/Inc + LDSCRIPT = $(GFXLIB)/boards/base/STM32F439i-Eval/CubeHAL/stm32f439nihx_flash.ld +endif + +include $(GFXLIB)/drivers/gdisp/STM32LTDC/driver.mk +include $(GFXLIB)/drivers/ginput/touch/EXC7200/driver.mk
\ No newline at end of file diff --git a/boards/base/STM32F439i-Eval/CubeHal/board_STM32LTDC.h b/boards/base/STM32F439i-Eval/CubeHal/board_STM32LTDC.h new file mode 100644 index 00000000..c1d65bc4 --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/board_STM32LTDC.h @@ -0,0 +1,163 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +// Avoid naming collisions with CubeHAL +#undef Red +#undef Green +#undef Blue + +// Include CubeHAL +#include "stm32f4xx_hal.h" +#include "stm324x9i_eval_sdram.h" + +// Panel parameters +#define AMPIRE640480_WIDTH ((uint16_t)640) /* LCD PIXEL WIDTH */ +#define AMPIRE640480_HEIGHT ((uint16_t)480) /* LCD PIXEL HEIGHT */ +#define AMPIRE640480_HSYNC ((uint16_t)30) /* Horizontal synchronization */ +#define AMPIRE640480_HBP ((uint16_t)114) /* Horizontal back porch */ +#define AMPIRE640480_HFP ((uint16_t)16) /* Horizontal front porch */ +#define AMPIRE640480_VSYNC ((uint16_t)3) /* Vertical synchronization */ +#define AMPIRE640480_VBP ((uint16_t)32) /* Vertical back porch */ +#define AMPIRE640480_VFP ((uint16_t)10) /* Vertical front porch */ +#define AMPIRE640480_FREQUENCY_DIVIDER 3 /* LCD Frequency divider */ + + +static const ltdcConfig driverCfg = { + 640, 480, // Width, Height (pixels) + 30, 3, // Horizontal, Vertical sync (pixels) + 114, 32, // Horizontal, Vertical back porch (pixels) + 16, 10, // Horizontal, Vertical front porch (pixels) + 0, // Sync flags + 0x000000, // Clear color (RGB888) + + { // Background layer config + (LLDCOLOR_TYPE *)SDRAM_DEVICE_ADDR, // Frame buffer address + 640, 480, // Width, Height (pixels) + 640 * LTDC_PIXELBYTES, // Line pitch (bytes) + LTDC_PIXELFORMAT, // Pixel format + 0, 0, // Start pixel position (x, y) + 640, 480, // Size of virtual layer (cx, cy) + LTDC_COLOR_FUCHSIA, // Default color (ARGB8888) + 0x980088, // Color key (RGB888) + LTDC_BLEND_FIX1_FIX2, // Blending factors + 0, // Palette (RGB888, can be NULL) + 0, // Palette length + 0xFF, // Constant alpha factor + LTDC_LEF_ENABLE // Layer configuration flags + }, + + LTDC_UNUSED_LAYER_CONFIG // Foreground layer config +}; + +#define LCD_MAX_PCLK ((uint8_t)0x00) +static LTDC_HandleTypeDef hltdc_eval; +static uint32_t PCLK_profile = LCD_MAX_PCLK; + +static void configureLcdPins(void) +{ + GPIO_InitTypeDef GPIO_Init_Structure; + + PCLK_profile = LCD_MAX_PCLK; + + // LTDC configuration + hltdc_eval.Init.HorizontalSync = (AMPIRE640480_HSYNC - 1); + hltdc_eval.Init.VerticalSync = (AMPIRE640480_VSYNC - 1); + hltdc_eval.Init.AccumulatedHBP = (AMPIRE640480_HSYNC + AMPIRE640480_HBP - 1); + hltdc_eval.Init.AccumulatedVBP = (AMPIRE640480_VSYNC + AMPIRE640480_VBP - 1); + hltdc_eval.Init.AccumulatedActiveH = (AMPIRE640480_HEIGHT + AMPIRE640480_VSYNC + AMPIRE640480_VBP - 1); + hltdc_eval.Init.AccumulatedActiveW = (AMPIRE640480_WIDTH + AMPIRE640480_HSYNC + AMPIRE640480_HBP - 1); + hltdc_eval.Init.TotalHeigh = (AMPIRE640480_HEIGHT + AMPIRE640480_VSYNC + AMPIRE640480_VBP + AMPIRE640480_VFP - 1); + hltdc_eval.Init.TotalWidth = (AMPIRE640480_WIDTH + AMPIRE640480_HSYNC + AMPIRE640480_HBP + AMPIRE640480_HFP - 1); + hltdc_eval.LayerCfg->ImageWidth = AMPIRE640480_WIDTH; + hltdc_eval.LayerCfg->ImageHeight = AMPIRE640480_HEIGHT; + hltdc_eval.Init.Backcolor.Blue = 0; + hltdc_eval.Init.Backcolor.Green = 0; + hltdc_eval.Init.Backcolor.Red = 0; + hltdc_eval.Init.HSPolarity = LTDC_HSPOLARITY_AL; + hltdc_eval.Init.VSPolarity = LTDC_VSPOLARITY_AL; + hltdc_eval.Init.DEPolarity = LTDC_DEPOLARITY_AL; + hltdc_eval.Init.PCPolarity = LTDC_PCPOLARITY_IPC; + hltdc_eval.Instance = LTDC; + HAL_LTDC_Init(&hltdc_eval); + + // LCD clock configuration + static RCC_PeriphCLKInitTypeDef periph_clk_init_struct; + periph_clk_init_struct.PLLSAI.PLLSAIN = 151; + periph_clk_init_struct.PeriphClockSelection = RCC_PERIPHCLK_LTDC; + periph_clk_init_struct.PLLSAI.PLLSAIR = 3; + periph_clk_init_struct.PLLSAIDivR = RCC_PLLSAIDIVR_2; + HAL_RCCEx_PeriphCLKConfig(&periph_clk_init_struct); + + // Enable peripheral clocks + __LTDC_CLK_ENABLE(); + __DMA2D_CLK_ENABLE(); + __GPIOI_CLK_ENABLE(); + __GPIOJ_CLK_ENABLE(); + __GPIOK_CLK_ENABLE(); + + /*** LTDC Pins configuration ***/ + // GPIOI + GPIO_Init_Structure.Pin = GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15; + GPIO_Init_Structure.Mode = GPIO_MODE_AF_PP; + GPIO_Init_Structure.Pull = GPIO_NOPULL; + GPIO_Init_Structure.Speed = GPIO_SPEED_FAST; + GPIO_Init_Structure.Alternate = GPIO_AF14_LTDC; + HAL_GPIO_Init(GPIOI, &GPIO_Init_Structure); + + // GPIOJ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | \ + GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | \ + GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | \ + GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15; + GPIO_Init_Structure.Mode = GPIO_MODE_AF_PP; + GPIO_Init_Structure.Pull = GPIO_NOPULL; + GPIO_Init_Structure.Speed = GPIO_SPEED_FAST; + GPIO_Init_Structure.Alternate = GPIO_AF14_LTDC; + HAL_GPIO_Init(GPIOJ, &GPIO_Init_Structure); + + // GPIOK configuration + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | \ + GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7; + GPIO_Init_Structure.Mode = GPIO_MODE_AF_PP; + GPIO_Init_Structure.Pull = GPIO_NOPULL; + GPIO_Init_Structure.Speed = GPIO_SPEED_FAST; + GPIO_Init_Structure.Alternate = GPIO_AF14_LTDC; + HAL_GPIO_Init(GPIOK, &GPIO_Init_Structure); +} + +static GFXINLINE void init_board(GDisplay* g) +{ + // As we are not using multiple displays we set g->board to NULL as we don't use it + g->board = 0; + + switch(g->controllerdisplay) { + case 0: + + // Set pin directions + configureLcdPins(); + + // Initialise the SDRAM + BSP_SDRAM_Init(); + + break; + } +} + +static GFXINLINE void post_init_board(GDisplay* g) +{ + (void) g; +} + +static GFXINLINE void set_backlight(GDisplay* g, uint8_t percent) +{ + (void) g; +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/boards/base/STM32F439i-Eval/CubeHal/gmouse_lld_EXC7200_board.h b/boards/base/STM32F439i-Eval/CubeHal/gmouse_lld_EXC7200_board.h new file mode 100644 index 00000000..4f8a18fb --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/gmouse_lld_EXC7200_board.h @@ -0,0 +1,89 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +/* + * Peripheral : I2C1 + * SDA : PB9 + * SCL : PB6 + */ + +#ifndef _GINPUT_LLD_MOUSE_BOARD_H +#define _GINPUT_LLD_MOUSE_BOARD_H + +#include "stm32f4xx_hal_rcc.h" +#include "stm32f4xx_hal_dma.h" +#include "stm32f4xx_hal_gpio.h" +#include "stm32f4xx_hal_i2c.h" + +// Resolution and Accuracy Settings +#define GMOUSE_EXC7200_PEN_CALIBRATE_ERROR 8 +#define GMOUSE_EXC7200_PEN_CLICK_ERROR 6 +#define GMOUSE_EXC7200_PEN_MOVE_ERROR 4 +#define GMOUSE_EXC7200_FINGER_CALIBRATE_ERROR 14 +#define GMOUSE_EXC7200_FINGER_CLICK_ERROR 18 +#define GMOUSE_EXC7200_FINGER_MOVE_ERROR 14 + +// Number of bytes for the private area of this board file +#define GMOUSE_EXC7200_BOARD_DATA_SIZE 0 + +// The slave address of the I2C EXC7200 +#define EXC7200_SLAVE_ADDR 0x08 + +static I2C_HandleTypeDef _i2cHandle; + +static bool_t init_board(GMouse* m, unsigned driverinstance) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + (void)m; + + // Enable peripheral clocks + __HAL_RCC_I2C1_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + // SCL pin setup + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // SDA pin setup + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // Initialize the I2C peripheral + _i2cHandle.Instance = I2C1; + _i2cHandle.Init.ClockSpeed = 400000; + _i2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2; + _i2cHandle.Init.OwnAddress1 = 0; + _i2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + _i2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED; + _i2cHandle.Init.OwnAddress2 = 0; + _i2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED; + _i2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED; + HAL_I2C_Init(&_i2cHandle); + + return TRUE; +} + +static bool_t read_bytes(GMouse* m, uint8_t reg, uint8_t* buffer, uint8_t nbrBytes) +{ + (void)m; + + HAL_I2C_Master_Transmit(&_i2cHandle, (uint16_t)EXC7200_SLAVE_ADDR, (uint8_t*)®, 1, 10000); + HAL_I2C_Master_Receive(&_i2cHandle, (uint16_t)EXC7200_SLAVE_ADDR, buffer, nbrBytes, 10000); + + return TRUE; +} + +#endif /* _GINPUT_LLD_MOUSE_BOARD_H */ diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.c b/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.c new file mode 100644 index 00000000..6e103a5a --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.c @@ -0,0 +1,460 @@ +/** + ****************************************************************************** + * @file stm324x9i_eval_sdram.c + * @author MCD Application Team + * @version V2.2.3 + * @date 22-April-2016 + * @brief This file includes the SDRAM driver for the MT48LC4M32B2B5-7 memory + * device mounted on STM324x9I-EVAL evaluation board. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* File Info : ----------------------------------------------------------------- + User NOTES +1. How To use this driver: +-------------------------- + - This driver is used to drive the MT48LC4M32B2B5-7 SDRAM external memory mounted + on STM324x9I-EVAL evaluation board. + - This driver does not need a specific component driver for the SDRAM device + to be included with. + +2. Driver description: +--------------------- + + Initialization steps: + o Initialize the SDRAM external memory using the BSP_SDRAM_Init() function. This + function includes the MSP layer hardware resources initialization and the + FMC controller configuration to interface with the external SDRAM memory. + o It contains the SDRAM initialization sequence to program the SDRAM external + device using the function BSP_SDRAM_Initialization_sequence(). Note that this + sequence is standard for all SDRAM devices, but can include some differences + from a device to another. If it is the case, the right sequence should be + implemented separately. + + + SDRAM read/write operations + o SDRAM external memory can be accessed with read/write operations once it is + initialized. + Read/write operation can be performed with AHB access using the functions + BSP_SDRAM_ReadData()/BSP_SDRAM_WriteData(), or by DMA transfer using the functions + BSP_SDRAM_ReadData_DMA()/BSP_SDRAM_WriteData_DMA(). + o The AHB access is performed with 32-bit width transaction, the DMA transfer + configuration is fixed at single (no burst) word transfer (see the + SDRAM_MspInit() static function). + o User can implement his own functions for read/write access with his desired + configurations. + o If interrupt mode is used for DMA transfer, the function BSP_SDRAM_DMA_IRQHandler() + is called in IRQ handler file, to serve the generated interrupt once the DMA + transfer is complete. + o You can send a command to the SDRAM device in runtime using the function + BSP_SDRAM_Sendcmd(), and giving the desired command as parameter chosen between + the predefined commands of the "FMC_SDRAM_CommandTypeDef" structure. + +------------------------------------------------------------------------------*/ + +/* Includes ------------------------------------------------------------------*/ +#undef Red +#undef Green +#undef Blue +#include "stm324x9i_eval_sdram.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM324x9I_EVAL + * @{ + */ + +/** @defgroup STM324x9I_EVAL_SDRAM STM324x9I EVAL SDRAM + * @{ + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Types_Definitions STM324x9I EVAL SDRAM Private Types Definitions + * @{ + */ +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Defines STM324x9I EVAL SDRAM Private Defines + * @{ + */ +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Macros STM324x9I EVAL SDRAM Private Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Variables STM324x9I EVAL SDRAM Private Variables + * @{ + */ +static SDRAM_HandleTypeDef sdramHandle; +static FMC_SDRAM_TimingTypeDef Timing; +static FMC_SDRAM_CommandTypeDef Command; +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Function_Prototypes STM324x9I EVAL SDRAM Private Function Prototypes + * @{ + */ +static void SDRAM_MspInit(void); +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Private_Functions STM324x9I EVAL SDRAM Private Functions + * @{ + */ + +/** + * @brief Initializes the SDRAM device. + * @retval SDRAM status + */ +uint8_t BSP_SDRAM_Init(void) +{ + static uint8_t sdramstatus = SDRAM_ERROR; + /* SDRAM device configuration */ + sdramHandle.Instance = FMC_SDRAM_DEVICE; + + /* Timing configuration for 90Mhz as SD clock frequency (System clock is up to 180Mhz */ + Timing.LoadToActiveDelay = 2; + Timing.ExitSelfRefreshDelay = 7; + Timing.SelfRefreshTime = 4; + Timing.RowCycleDelay = 7; + Timing.WriteRecoveryTime = 2; + Timing.RPDelay = 2; + Timing.RCDDelay = 2; + + sdramHandle.Init.SDBank = FMC_SDRAM_BANK1; + sdramHandle.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9; + sdramHandle.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12; + sdramHandle.Init.MemoryDataWidth = SDRAM_MEMORY_WIDTH; + sdramHandle.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4; + sdramHandle.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3; + sdramHandle.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE; + sdramHandle.Init.SDClockPeriod = SDCLOCK_PERIOD; + sdramHandle.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE; + sdramHandle.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0; + + /* SDRAM controller initialization */ + SDRAM_MspInit(); + if(HAL_SDRAM_Init(&sdramHandle, &Timing) != HAL_OK) + { + sdramstatus = SDRAM_ERROR; + } + else + { + sdramstatus = SDRAM_OK; + } + + /* SDRAM initialization sequence */ + BSP_SDRAM_Initialization_sequence(REFRESH_COUNT); + + return sdramstatus; +} + +/** + * @brief Programs the SDRAM device. + * @param RefreshCount: SDRAM refresh counter value + */ +void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount) +{ + __IO uint32_t tmpmrd = 0; + + /* Step 1: Configure a clock configuration enable command */ + Command.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE; + Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1; + Command.AutoRefreshNumber = 1; + Command.ModeRegisterDefinition = 0; + + /* Send the command */ + HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT); + + /* Step 2: Insert 100 us minimum delay */ + /* Inserted delay is equal to 1 ms due to systick time base unit (ms) */ + HAL_Delay(1); + + /* Step 3: Configure a PALL (precharge all) command */ + Command.CommandMode = FMC_SDRAM_CMD_PALL; + Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1; + Command.AutoRefreshNumber = 1; + Command.ModeRegisterDefinition = 0; + + /* Send the command */ + HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT); + + /* Step 4: Configure an Auto Refresh command */ + Command.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE; + Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1; + Command.AutoRefreshNumber = 8; + Command.ModeRegisterDefinition = 0; + + /* Send the command */ + HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT); + + /* Step 5: Program the external memory mode register */ + tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 |\ + SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |\ + SDRAM_MODEREG_CAS_LATENCY_3 |\ + SDRAM_MODEREG_OPERATING_MODE_STANDARD |\ + SDRAM_MODEREG_WRITEBURST_MODE_SINGLE; + + Command.CommandMode = FMC_SDRAM_CMD_LOAD_MODE; + Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1; + Command.AutoRefreshNumber = 1; + Command.ModeRegisterDefinition = tmpmrd; + + /* Send the command */ + HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT); + + /* Step 6: Set the refresh rate counter */ + /* Set the device refresh rate */ + HAL_SDRAM_ProgramRefreshRate(&sdramHandle, RefreshCount); +} + +/** + * @brief Reads an mount of data from the SDRAM memory in polling mode. + * @param uwStartAddress: Read start address + * @param pData: Pointer to data to be read + * @param uwDataSize: Size of read data from the memory + * @retval SDRAM status + */ +uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) +{ + if(HAL_SDRAM_Read_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK) + { + return SDRAM_ERROR; + } + else + { + return SDRAM_OK; + } +} + +/** + * @brief Reads an mount of data from the SDRAM memory in DMA mode. + * @param uwStartAddress: Read start address + * @param pData: Pointer to data to be read + * @param uwDataSize: Size of read data from the memory + * @retval SDRAM status + */ +uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) +{ + if(HAL_SDRAM_Read_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK) + { + return SDRAM_ERROR; + } + else + { + return SDRAM_OK; + } +} + +/** + * @brief Writes an mount of data to the SDRAM memory in polling mode. + * @param uwStartAddress: Write start address + * @param pData: Pointer to data to be written + * @param uwDataSize: Size of written data from the memory + * @retval SDRAM status + */ +uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) +{ + if(HAL_SDRAM_Write_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK) + { + return SDRAM_ERROR; + } + else + { + return SDRAM_OK; + } +} + +/** + * @brief Writes an mount of data to the SDRAM memory in DMA mode. + * @param uwStartAddress: Write start address + * @param pData: Pointer to data to be written + * @param uwDataSize: Size of written data from the memory + * @retval SDRAM status + */ +uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) +{ + if(HAL_SDRAM_Write_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK) + { + return SDRAM_ERROR; + } + else + { + return SDRAM_OK; + } +} + +/** + * @brief Sends command to the SDRAM bank. + * @param SdramCmd: Pointer to SDRAM command structure + * @retval HAL status + */ +uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd) +{ + if(HAL_SDRAM_SendCommand(&sdramHandle, SdramCmd, SDRAM_TIMEOUT) != HAL_OK) + { + return SDRAM_ERROR; + } + else + { + return SDRAM_OK; + } +} + +/** + * @brief Handles SDRAM DMA transfer interrupt request. + */ +void BSP_SDRAM_DMA_IRQHandler(void) +{ + HAL_DMA_IRQHandler(sdramHandle.hdma); +} + +/** + * @brief Initializes SDRAM MSP. + */ +static void SDRAM_MspInit(void) +{ + static DMA_HandleTypeDef dmaHandle; + GPIO_InitTypeDef GPIO_Init_Structure; + SDRAM_HandleTypeDef *hsdram = &sdramHandle; + + /* Enable FMC clock */ + __FMC_CLK_ENABLE(); + + /* Enable chosen DMAx clock */ + __DMAx_CLK_ENABLE(); + + /* Enable GPIOs clock */ + __GPIOD_CLK_ENABLE(); + __GPIOE_CLK_ENABLE(); + __GPIOF_CLK_ENABLE(); + __GPIOG_CLK_ENABLE(); + __GPIOH_CLK_ENABLE(); + __GPIOI_CLK_ENABLE(); + + /* Common GPIO configuration */ + GPIO_Init_Structure.Mode = GPIO_MODE_AF_PP; + GPIO_Init_Structure.Pull = GPIO_PULLUP; + GPIO_Init_Structure.Speed = GPIO_SPEED_FAST; + GPIO_Init_Structure.Alternate = GPIO_AF12_FMC; + + /* GPIOD configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_8| GPIO_PIN_9 | GPIO_PIN_10 |\ + GPIO_PIN_14 | GPIO_PIN_15; + + + HAL_GPIO_Init(GPIOD, &GPIO_Init_Structure); + + /* GPIOE configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_7| GPIO_PIN_8 | GPIO_PIN_9 |\ + GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\ + GPIO_PIN_15; + + HAL_GPIO_Init(GPIOE, &GPIO_Init_Structure); + + /* GPIOF configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2| GPIO_PIN_3 | GPIO_PIN_4 |\ + GPIO_PIN_5 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\ + GPIO_PIN_15; + + HAL_GPIO_Init(GPIOF, &GPIO_Init_Structure); + + /* GPIOG configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_4| GPIO_PIN_5 | GPIO_PIN_8 |\ + GPIO_PIN_15; + HAL_GPIO_Init(GPIOG, &GPIO_Init_Structure); + + /* GPIOH configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_5 | GPIO_PIN_8 | GPIO_PIN_9 |\ + GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\ + GPIO_PIN_15; + HAL_GPIO_Init(GPIOH, &GPIO_Init_Structure); + + /* GPIOI configuration */ + GPIO_Init_Structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 |\ + GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_9 | GPIO_PIN_10; + HAL_GPIO_Init(GPIOI, &GPIO_Init_Structure); + + /* Configure common DMA parameters */ + dmaHandle.Init.Channel = SDRAM_DMAx_CHANNEL; + dmaHandle.Init.Direction = DMA_MEMORY_TO_MEMORY; + dmaHandle.Init.PeriphInc = DMA_PINC_ENABLE; + dmaHandle.Init.MemInc = DMA_MINC_ENABLE; + dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD; + dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_WORD; + dmaHandle.Init.Mode = DMA_NORMAL; + dmaHandle.Init.Priority = DMA_PRIORITY_HIGH; + dmaHandle.Init.FIFOMode = DMA_FIFOMODE_DISABLE; + dmaHandle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; + dmaHandle.Init.MemBurst = DMA_MBURST_SINGLE; + dmaHandle.Init.PeriphBurst = DMA_PBURST_SINGLE; + + dmaHandle.Instance = SDRAM_DMAx_STREAM; + + /* Associate the DMA handle */ + __HAL_LINKDMA(hsdram, hdma, dmaHandle); + + /* Deinitialize the stream for new transfer */ + HAL_DMA_DeInit(&dmaHandle); + + /* Configure the DMA stream */ + HAL_DMA_Init(&dmaHandle); + + /* NVIC configuration for DMA transfer complete interrupt */ + HAL_NVIC_SetPriority(SDRAM_DMAx_IRQn, 5, 0); + HAL_NVIC_EnableIRQ(SDRAM_DMAx_IRQn); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.h b/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.h new file mode 100644 index 00000000..d9c04044 --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm324x9i_eval_sdram.h @@ -0,0 +1,163 @@ +/** + ****************************************************************************** + * @file stm324x9i_eval_sdram.h + * @author MCD Application Team + * @version V2.2.3 + * @date 22-April-2016 + * @brief This file contains the common defines and functions prototypes for + * the stm324x9i_eval_sdram.c driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM324x9I_EVAL_SDRAM_H +#define __STM324x9I_EVAL_SDRAM_H + +#undef Red +#undef Green +#undef Blue + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM324x9I_EVAL + * @{ + */ + +/** @addtogroup STM324x9I_EVAL_SDRAM + * @{ + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Exported_Types STM324x9I EVAL SDRAM Exported Types + * @{ + */ + +/** + * @brief SDRAM status structure definition + */ +#define SDRAM_OK 0x00 +#define SDRAM_ERROR 0x01 + +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Exported_Constants STM324x9I EVAL SDRAM Exported Constants + * @{ + */ +#define SDRAM_DEVICE_ADDR ((uint32_t)0xC0000000) +#define SDRAM_DEVICE_SIZE ((uint32_t)0x800000) /* SDRAM device size in MBytes */ + +/* #define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_8 */ +/* #define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_16 */ +#define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_32 + +#define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_2 +/* #define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_3 */ + +#define REFRESH_COUNT ((uint32_t)0x0569) /* SDRAM refresh counter (90Mhz SD clock) */ + +#define SDRAM_TIMEOUT ((uint32_t)0xFFFF) + +/* DMA definitions for SDRAM DMA transfer */ +#define __DMAx_CLK_ENABLE __DMA2_CLK_ENABLE +#define SDRAM_DMAx_CHANNEL DMA_CHANNEL_0 +#define SDRAM_DMAx_STREAM DMA2_Stream0 +#define SDRAM_DMAx_IRQn DMA2_Stream0_IRQn +#define SDRAM_DMAx_IRQHandler DMA2_Stream0_IRQHandler + +/** + * @brief FMC SDRAM Mode definition register defines + */ +#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001) +#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002) +#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004) +#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) +#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020) +#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030) +#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Exported_Macro STM324x9I EVAL SDRAM Exported Macro + * @{ + */ +/** + * @} + */ + +/** @defgroup STM324x9I_EVAL_SDRAM_Exported_Functions STM324x9I EVAL SDRAM Exported Functions + * @{ + */ +uint8_t BSP_SDRAM_Init(void); +void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount); +uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd); +void BSP_SDRAM_DMA_IRQHandler(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM324x9I_EVAL_SDRAM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_interrupts.c b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_interrupts.c new file mode 100644 index 00000000..194d4e70 --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_interrupts.c @@ -0,0 +1,190 @@ +/** + ****************************************************************************** + * @file Templates/Src/stm32f4xx_it.c + * @author MCD Application Team + * @version V1.3.4 + * @date 06-May-2016 + * @brief Main Interrupt Service Routines. + * This file provides template for all exceptions handler and + * peripherals interrupt service routine. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#undef Red +#undef Green +#undef Blue +#include "stm32f4xx_hal_conf.h" +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Examples + * @{ + */ + +/** @addtogroup Templates + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M4 Processor Exceptions Handlers */ +/******************************************************************************/ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Memory Manage exception. + * @param None + * @retval None + */ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Bus Fault exception. + * @param None + * @retval None + */ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Usage Fault exception. + * @param None + * @retval None + */ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles Debug Monitor exception. + * @param None + * @retval None + */ +void DebugMon_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ +void SysTick_Handler(void) +{ + HAL_IncTick(); +} + +/******************************************************************************/ +/* STM32F4xx Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles PPP interrupt request. + * @param None + * @retval None + */ +/*void PPP_IRQHandler(void) +{ +}*/ + + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_startup.s b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_startup.s new file mode 100644 index 00000000..3f356670 --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_startup.s @@ -0,0 +1,561 @@ +/** + ****************************************************************************** + * @file startup_stm32f429xx.s + * @author MCD Application Team + * @version V1.3.4 + * @date 06-May-2016 + * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* Reserved */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC_IRQHandler */ + .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */ + .word DMA2D_IRQHandler /* DMA2D */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_system.c b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_system.c new file mode 100644 index 00000000..8e33c5ce --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_system.c @@ -0,0 +1,685 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @version V1.3.4 + * @date 06-May-2016 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ +#undef Red +#undef Green +#undef Blue + +#include "stm32f4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted + on STM324xG_EVAL/STM324x9I_EVAL boards as data memory */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/* #define DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000; + __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; + + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ + + (void)(tmp); +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000CAFFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +} +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_ugfx.c b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_ugfx.c new file mode 100644 index 00000000..5251fbeb --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm32f439i_raw32_ugfx.c @@ -0,0 +1,88 @@ +#include "../../../gfx.h" + +#undef Red +#undef Green +#undef Blue + +#include "stm32f4xx_hal.h" + +#if GFX_USE_OS_RAW32 + void _init() + { + } + + systemticks_t gfxSystemTicks(void) + { + return HAL_GetTick(); + } + + systemticks_t gfxMillisecondsToTicks(delaytime_t ms) + { + return ms; + } +#endif + +static void SystemClock_Config(void); + +void Raw32OSInit(void) +{ + HAL_Init(); + + SystemClock_Config(); +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 180000000 + * HCLK(Hz) = 180000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 25000000 + * PLL_M = 25 + * PLL_N = 360 + * PLL_P = 2 + * PLL_Q = 7 + * VDD(V) = 3.3 + * Main regulator output voltage = Scale1 mode + * Flash Latency(WS) = 5 + * @param None + * @retval None + */ +static void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 25; + RCC_OscInitStruct.PLL.PLLN = 360; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); +} diff --git a/boards/base/STM32F439i-Eval/CubeHal/stm32f439nihx_flash.ld b/boards/base/STM32F439i-Eval/CubeHal/stm32f439nihx_flash.ld new file mode 100644 index 00000000..62116a8f --- /dev/null +++ b/boards/base/STM32F439i-Eval/CubeHal/stm32f439nihx_flash.ld @@ -0,0 +1,189 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F439NIHx Device with +** 2048KByte FLASH, 192KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20030000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200;; /* required amount of heap */ +_Min_Stack_Size = 0x400;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 192K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + |