diff options
Diffstat (limited to 'boards/base')
-rw-r--r-- | boards/base/Linux-Framebuffer/board_framebuffer.h | 2 | ||||
-rw-r--r-- | boards/base/RaspberryPi/readme.txt | 13 |
2 files changed, 10 insertions, 5 deletions
diff --git a/boards/base/Linux-Framebuffer/board_framebuffer.h b/boards/base/Linux-Framebuffer/board_framebuffer.h index e1836527..9b760e08 100644 --- a/boards/base/Linux-Framebuffer/board_framebuffer.h +++ b/boards/base/Linux-Framebuffer/board_framebuffer.h @@ -123,7 +123,7 @@ } if (fb_var.red.offset != LLDCOLOR_SHIFT_R || fb_var.green.offset != LLDCOLOR_SHIFT_G || fb_var.blue.offset != LLDCOLOR_SHIFT_B) { #if LLDCOLOR_SHIFT_B == 0 - fprintf(stderr, "GDISP Framebuffer: THe display pixel format is not RGB\n"); + fprintf(stderr, "GDISP Framebuffer: The display pixel format is not RGB\n"); #else fprintf(stderr, "GDISP Framebuffer: The display pixel format is not BGR\n"); #endif diff --git a/boards/base/RaspberryPi/readme.txt b/boards/base/RaspberryPi/readme.txt index d4a59bf2..6ff2246f 100644 --- a/boards/base/RaspberryPi/readme.txt +++ b/boards/base/RaspberryPi/readme.txt @@ -1,15 +1,20 @@ -This directory contains the interface for the Raspberry Pi framebuffer. +This directory contains the interface for the Raspberry Pi direct hardware framebuffer. This talks directly to the raspberry pi hardware (not via a linux framebuffer driver). +If you are using linux on the Pi then consider using the linux-X or the linux-Framebuffer +board definitions instead of this one. This is really designed for non-Linux platforms +or where there is no linux display driver available. It will still work under linux but +the other solutions might be better. + This graphics interface is software driven - it is not an accelerated interface. -This board definition should work on any operating system that will work on the Raspberry Pi - eg. Linux, FreeRTOS. +The board definition should work on any operating system that will work on the Raspberry Pi + eg. Linux, FreeRTOS, FreeBSD. On this board uGFX currently supports: - GDISP via the framebuffer driver -THe following variables may optionally be defined in your gfxconf.h or your makefile... +The following variables may optionally be defined in your gfxconf.h or your makefile... - GDISP_LLD_PIXELFORMAT default = GDISP_PIXELFORMAT_RGB565 - GDISP_SCREEN_WIDTH default = 800 - GDISP_SCREEN_HEIGHT default = 600 |