1 files changed, 0 insertions, 74 deletions
diff --git a/demos/applications/tetris/Example_Makefiles/stm32f4_chibios_3.x/gmouse_lld_ADS7843_board.h b/demos/applications/tetris/Example_Makefiles/stm32f4_chibios_3.x/gmouse_lld_ADS7843_board.h
deleted file mode 100644
index 77d82bf8..00000000
--- a/demos/applications/tetris/Example_Makefiles/stm32f4_chibios_3.x/gmouse_lld_ADS7843_board.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GINPUT_LLD_MOUSE_BOARD_H
-#define _GINPUT_LLD_MOUSE_BOARD_H
-
-#define GMOUSE_ADS7843_PEN_CALIBRATE_ERROR		2
-#define GMOUSE_ADS7843_PEN_CLICK_ERROR			2
-#define GMOUSE_ADS7843_PEN_MOVE_ERROR			2
-#define GMOUSE_ADS7843_FINGER_CALIBRATE_ERROR		4
-#define GMOUSE_ADS7843_FINGER_CLICK_ERROR		4
-#define GMOUSE_ADS7843_FINGER_MOVE_ERROR		40
-
-static const SPIConfig spicfg = {
-    0,
-  GPIOC,
-    6,
-    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
-};
-
-static bool_t init_board(GMouse* m, unsigned driverinstance)
-{
-    (void)m;
-
-    // Only one touch interface on this board
-    if (driverinstance)
-	return FALSE;
-
-    // Set the GPIO modes
-        palSetPadMode(GPIOC, 6, PAL_MODE_OUTPUT_PUSHPULL);
-        palSetPadMode(GPIOC, 4, PAL_MODE_INPUT);
-        palSetPadMode(GPIOA, 5, PAL_MODE_ALTERNATE(5));
-        palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(5));
-        palSetPadMode(GPIOA, 7, PAL_MODE_ALTERNATE(5));
-
-    // Start the SPI peripheral
-    spiStart(&SPID1, &spicfg);
-
-    return TRUE;
-}
-
-GFXINLINE bool_t getpin_pressed(void) {
-  return (!palReadPad(GPIOC, 4));
-}
-
-static GFXINLINE void aquire_bus(void) {
-  spiAcquireBus(&SPID1);
-  palClearPad(GPIOC, 6);
-}
-
-static GFXINLINE void release_bus(void) {
-  palSetPad(GPIOC, 6);
-  spiReleaseBus(&SPID1);
-}
-
-static GFXINLINE uint16_t read_value(uint16_t port) {
-    static uint8_t txbuf[3] = {0};
-    static uint8_t rxbuf[3] = {0};
-    uint16_t ret;
-
-    txbuf[0] = port;
-
-    spiExchange(&SPID1, 3, txbuf, rxbuf);
-
-    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3);
-
-  return ret;
-}
-
-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */