1 files changed, 0 insertions, 113 deletions
diff --git a/drivers/gdisp/ILI9481/gdisp_lld_board_example.h b/drivers/gdisp/ILI9481/gdisp_lld_board_example.h
deleted file mode 100644
index 8755f5a7..00000000
--- a/drivers/gdisp/ILI9481/gdisp_lld_board_example.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://chibios-gfx.com/license.html
- */
-
-/**
- * @file    drivers/gdisp/ILI9481/gdisp_lld_board_example.h
- * @brief   GDISP Graphics Driver subsystem low level driver source for
- * 			the ILI9481 and compatible HVGA display
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-/**
- * @brief   Initialise the board for the display.
- *
- * @notapi
- */
-static inline void init_board(void) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for init_board for your board"
-}
-
-/**
- * @brief   Set or clear the lcd reset pin.
- *
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- * 
- * @notapi
- */
-static inline void setpin_reset(bool_t state) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for setpin_reset for your board"
-}
-
-/**
- * @brief   Set the lcd back-light level.
- *
- * @param[in] percent		0 to 100%
- * 
- * @notapi
- */
-static inline void set_backlight(uint8_t percent) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for set_backlight for your board"
-}
-
-/**
- * @brief   Take exclusive control of the bus
- *
- * @notapi
- */
-static inline void acquire_bus(void) {
-#error "ILI9481: You must supply a definition for acquire_bus for your board"
-}
-
-/**
- * @brief   Release exclusive control of the bus
- *
- * @notapi
- */
-static inline void release_bus(void) {
-#error "ILI9481: You must supply a definition for release_bus for your board"
-}
-
-/**
- * @brief   Send data to the index register.
- *
- * @param[in] index		The index register to set
- *
- * @notapi
- */
-static inline void write_index(uint16_t index) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for write_index for your board"
-}
-
-/**
- * @brief   Send data to the lcd.
- *
- * @param[in] data		The data to send
- * 
- * @notapi
- */
-static inline void write_data(uint16_t data) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for write_data for your board"
-}
-
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
-/**
- * @brief   Read data from the lcd.
- *
- * @return	The data from the lcd
- * @note	The chip select may need to be asserted/de-asserted
- * 			around the actual spi read
- * 
- * @notapi
- */
-static inline uint16_t read_data(void) {
-	/* Code here */
-#error "ILI9481: You must supply a definition for read_data for your board"
-}
-#endif
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */