diff options
Diffstat (limited to 'drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h')
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h new file mode 100644 index 00000000..8aeb633b --- /dev/null +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h @@ -0,0 +1,114 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://chibios-gfx.com/license.html + */ + +/** + * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h + * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE8 display. + * + * @addtogroup GDISP + * @{ + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +/** + * @brief Initialise the board for the display. + * @notes Performs the following functions: + * 1. initialise the spi port used by your display + * 2. initialise the reset pin (initial state not-in-reset) + * 3. initialise the chip select pin (initial state not-active) + * 4. initialise the backlight pin (initial state back-light off) + * + * @notapi + */ +static inline void init_board(void) { + +} + +/** + * @brief Set or clear the lcd reset pin. + * + * @param[in] state TRUE = lcd in reset, FALSE = normal operation + * + * @notapi + */ +static inline void setpin_reset(bool_t state) { + +} + +/** + * @brief Set the lcd back-light level. + * @note For now 0% turns the backlight off, anything else the backlight is on. + * While the hardware supports PWM backlight control, we are not using it + * yet. + * + * @param[in] percent 0 to 100% + * + * @notapi + */ +static inline void set_backlight(uint8_t percent) { + +} + +/** + * @brief Take exclusive control of the bus + * + * @notapi + */ +static inline void acquire_bus(void) { + +} + +/** + * @brief Release exclusive control of the bus + * + * @notapi + */ +static inline void release_bus(void) { + +} + +/** + * @brief Send an 8 bit command to the lcd. + * + * @param[in] cmd The command to send + * + * @notapi + */ +static inline void write_cmd(uint16_t cmd) { + +} + +/** + * @brief Send an 8 bit data to the lcd. + * + * @param[in] data The data to send + * + * @notapi + */ +static inline void write_data(uint16_t data) { + +} + +#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) +/** + * @brief Read data from the lcd. + * + * @return The data from the lcd + * @note The chip select may need to be asserted/de-asserted + * around the actual spi read + * + * @notapi + */ +static inline uint16_t read_data(void) { + +} +#endif + +#endif /* _GDISP_LLD_BOARD_H */ +/** @} */ |