diff options
Diffstat (limited to 'drivers/gdisp/SSD1322/readme.txt')
-rw-r--r-- | drivers/gdisp/SSD1322/readme.txt | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/gdisp/SSD1322/readme.txt b/drivers/gdisp/SSD1322/readme.txt new file mode 100644 index 00000000..571dcd62 --- /dev/null +++ b/drivers/gdisp/SSD1322/readme.txt @@ -0,0 +1,25 @@ +Description: + +Driver for OLED with 4-wire serial interface and I2C/SPI interface + +Know restictions: +- Driver works only with SSD1306 hooked up over I2C or SPI (include corresponding header) +- Driver is written for 128x64 pixel displays (128x32 are only partly supported and need small further work) +- Flushing is required for this driver + +To use this driver: + +1. Add in your gfxconf.h: + a) #define GFX_USE_GDISP TRUE + + b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD + + c) The following are optional - define them if you are not using the defaults below: + #define GDISP_SCREEN_WIDTH 128 + #define GDISP_SCREEN_HEIGHT 64 + +2. If you are not using a known board then create a gdisp_lld_board.h file according to + given example files (or just stick with them) and ensure it is on your include path. + +3. To your makefile add the following lines: + include $(GFXLIB)/drivers/gdisp/SSD1322/gdisp_lld.mk |