From b6986f5b169631fb76c8cb191807321c3ac04f7a Mon Sep 17 00:00:00 2001
From: inmarket <andrewh@inmarket.com.au>
Date: Sat, 19 Oct 2013 16:33:56 +1000
Subject: Convert Nokia6610GE8 driver to the new format.

---
 .../Nokia6610GE8/board_Nokia6610GE8_template.h     | 131 +++++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h

(limited to 'drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h')

diff --git a/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h
new file mode 100644
index 00000000..93689abc
--- /dev/null
+++ b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h
+ * @brief   GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
+ *
+ * @addtogroup GDISP
+ * @{
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+/*
+ * Set various display properties. These properties mostly depend on the exact controller chip you get.
+ * The defaults should work for most controllers.
+ */
+//#define GDISP_SCREEN_HEIGHT				130		// The visible display height
+//#define GDISP_SCREEN_WIDTH				130		// The visible display width
+//#define GDISP_RAM_X_OFFSET				0		// The x offset of the visible area
+//#define GDISP_RAM_Y_OFFSET				2		// The y offset of the visible area
+//#define GDISP_SLEEP_POS					50		// The position of the sleep mode partial display
+//#define GDISP_INITIAL_CONTRAST			50		// The initial contrast percentage
+//#define GDISP_INITIAL_BACKLIGHT			100		// The initial backlight percentage
+
+/**
+ * @brief   Initialise the board for the display.
+ *
+ * @param[in] g			The GDisplay structure
+ *
+ * @note	Set the g->priv member to whatever is appropriate. For multiple
+ * 			displays this might be a pointer to the appropriate register set.
+ *
+ * @notapi
+ */
+static inline void init_board(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   After the initialisation.
+ *
+ * @param[in] g			The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Set or clear the lcd reset pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
+ * 
+ * @notapi
+ */
+static inline void setpin_reset(GDisplay *g, bool_t state) {
+	(void) g;
+	(void) state;
+}
+
+/**
+ * @brief   Set the lcd back-light level.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] percent		0 to 100%
+ * 
+ * @notapi
+ */
+static inline void set_backlight(GDisplay *g, uint8_t percent) {
+	(void) g;
+	(void) percent;
+}
+
+/**
+ * @brief   Take exclusive control of the bus
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void acquire_bus(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Release exclusive control of the bus
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void release_bus(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Send data to the index register.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] index			The index register to set
+ *
+ * @notapi
+ */
+static inline void write_index(GDisplay *g, uint16_t index) {
+	(void) g;
+	(void) index;
+}
+
+/**
+ * @brief   Send data to the lcd.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] data			The data to send
+ * 
+ * @notapi
+ */
+static inline void write_data(GDisplay *g, uint16_t data) {
+	(void) g;
+	(void) data;
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
+/** @} */
-- 
cgit v1.2.3