From 9f2a7c36d9e37364168455c7ffc3440ce40144dc Mon Sep 17 00:00:00 2001 From: Joel Bodenmann Date: Mon, 19 Nov 2012 21:55:08 +0100 Subject: replaced get_bus by aquire_bus --- drivers/gdisp/SSD1289/gdisp_lld.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/gdisp/SSD1289/gdisp_lld.c') diff --git a/drivers/gdisp/SSD1289/gdisp_lld.c b/drivers/gdisp/SSD1289/gdisp_lld.c index f70d585c..f785a532 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld.c +++ b/drivers/gdisp/SSD1289/gdisp_lld.c @@ -161,7 +161,7 @@ bool_t GDISP_LLD(init)(void) { delayms(20); // Get the bus for the following initialisation commands - get_bus(); + aquire_bus(); write_reg(0x0000,0x0001); delay(5); write_reg(0x0003,0xA8A4); delay(5); @@ -241,7 +241,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; #endif - get_bus(); + aquire_bus(); set_cursor(x, y); write_reg(0x0022, color); release_bus(); @@ -276,7 +276,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { void GDISP_LLD(clear)(color_t color) { unsigned i; - get_bus(); + aquire_bus(); set_cursor(0, 0); stream_start(); for(i = 0; i < GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT; i++) @@ -310,7 +310,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { area = cx*cy; - get_bus(); + aquire_bus(); set_viewport(x, y, cx, cy); stream_start(); for(i = 0; i < area; i++) @@ -346,7 +346,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; #endif - get_bus(); + aquire_bus(); set_viewport(x, y, cx, cy); stream_start(); @@ -379,7 +379,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { if (x < 0 || x >= GDISP.Width || y < 0 || y >= GDISP.Height) return 0; #endif - get_bus(); + aquire_bus(); set_cursor(x, y); stream_start(); color = read_data(); // dummy read @@ -419,7 +419,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { abslines = lines < 0 ? -lines : lines; - get_bus(); + aquire_bus(); if (abslines >= cy) { abslines = cy; gap = 0; -- cgit v1.2.3