From 5e9e1a36ab3685ba9e50fa52fe2a8c7bf02ac094 Mon Sep 17 00:00:00 2001
From: inmarket <andrewh@inmarket.com.au>
Date: Tue, 22 Oct 2013 18:38:56 +1000
Subject: Convert SSD2119 to new driver format

---
 drivers/gdisp/SSD2119/board_SSD2119_template.h | 191 +++++++++++++++++++++++++
 1 file changed, 191 insertions(+)
 create mode 100644 drivers/gdisp/SSD2119/board_SSD2119_template.h

(limited to 'drivers/gdisp/SSD2119/board_SSD2119_template.h')

diff --git a/drivers/gdisp/SSD2119/board_SSD2119_template.h b/drivers/gdisp/SSD2119/board_SSD2119_template.h
new file mode 100644
index 00000000..b4c6341d
--- /dev/null
+++ b/drivers/gdisp/SSD2119/board_SSD2119_template.h
@@ -0,0 +1,191 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/gdisp/SSD2119/board_SSD2119_template.h
+ * @brief   GDISP Graphic Driver subsystem board template for the SSD2119 display.
+ *
+ * @addtogroup GDISP
+ * @{
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+/**
+ * @brief   Initialise the board for the display.
+ *
+ * @param[in] g			The GDisplay structure
+ *
+ * @note	Set the g->board member to whatever is appropriate. For multiple
+ * 			displays this might be a pointer to the appropriate register set.
+ *
+ * @notapi
+ */
+static inline void init_board(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   After the initialisation.
+ *
+ * @param[in] g			The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Set or clear the lcd reset pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
+ *
+ * @notapi
+ */
+static inline void setpin_reset(GDisplay *g, bool_t state) {
+	(void) g;
+	(void) state;
+}
+
+/**
+ * @brief   Set the lcd back-light level.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] percent		0 to 100%
+ *
+ * @notapi
+ */
+static inline void set_backlight(GDisplay *g, uint8_t percent) {
+	(void) g;
+	(void) percent;
+}
+
+/**
+ * @brief   Take exclusive control of the bus
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void acquire_bus(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Release exclusive control of the bus
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void release_bus(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Send data to the index register.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] index			The index register to set
+ *
+ * @notapi
+ */
+static inline void write_index(GDisplay *g, uint16_t index) {
+	(void) g;
+	(void) index;
+}
+
+/**
+ * @brief   Send data to the lcd.
+ *
+ * @param[in] g				The GDisplay structure
+ * @param[in] data			The data to send
+ *
+ * @notapi
+ */
+static inline void write_data(GDisplay *g, uint16_t data) {
+	(void) g;
+	(void) data;
+}
+
+/**
+ * @brief   Set the bus in read mode
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void setreadmode(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Set the bus back into write mode
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline void setwritemode(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief   Read data from the lcd.
+ * @return	The data from the lcd
+ *
+ * @param[in] g				The GDisplay structure
+ *
+ * @notapi
+ */
+static inline uint16_t read_data(GDisplay *g) {
+	(void) g;
+	return 0;
+}
+
+/**
+ * The below section you can replace with #error if your interface doesn't support DMA
+ */
+#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
+	//#error "GDISP - SSD2119: This interface does not support DMA"
+
+	/**
+	 * @brief	Transfer data using DMA but don't increment the source address
+	 *
+	 * @param[in] g				The GDisplay structure
+	 * @param[in] buffer		The source buffer location
+	 * @param[in] area			The number of pixels to transfer
+	 *
+	 * @notapi
+	 */
+	static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
+		(void) g;
+		(void) buffer;
+		(void) area;
+	}
+
+	/**
+	 * @brief	Transfer data using DMA incrementing the source address
+	 *
+	 * @param[in] g				The GDisplay structure
+	 * @param[in] buffer		The source buffer location
+	 * @param[in] area			The number of pixels to transfer
+	 *
+	 * @notapi
+	 */
+	static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
+		(void) g;
+		(void) buffer;
+		(void) area;
+	}
+#endif
+
+#endif /* _GDISP_LLD_BOARD_H */
+/** @} */
-- 
cgit v1.2.3