From 2a65ea53880ca07fa3755a84a91747acda2f48ba Mon Sep 17 00:00:00 2001 From: Mateusz Tomaszkiewicz Date: Wed, 12 Jun 2013 23:56:12 +0200 Subject: Various readme update For GDISP drivers SSD2119 & SSD1289. --- drivers/gdisp/SSD2119/readme.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/gdisp/SSD2119/readme.txt') diff --git a/drivers/gdisp/SSD2119/readme.txt b/drivers/gdisp/SSD2119/readme.txt index 371df813..23d82eb7 100644 --- a/drivers/gdisp/SSD2119/readme.txt +++ b/drivers/gdisp/SSD2119/readme.txt @@ -4,17 +4,20 @@ Driver for LCD with 16-bit 8080 interface (65k colors). To use this driver: -1. Add in your halconf.h: +1. Add in your gfxconf.h: a) #define GFX_USE_GDISP TRUE b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD c) If you are not using a known board then create a gdisp_lld_board.h file - and ensure it is on your include path. - Use the gdisp_lld_board_embest_dmstf4bb_fsmc.h file as a basis. + and ensure it is on your include path. Use the gdisp_lld_board_embest_dmstf4bb.h + file as a basis. Currently known boards are: - BOARD_EMBEST_DMSTF4BB_FSMC - FSMC interface - Board configuration assume that you have STM32_PWM_USE_TIM4 set to TRUE in your mcuconf.h. + BOARD_EMBEST_DMSTF4BB - FSMC interface + This board configuration assumes that you have PWM driver enabled + and STM32_PWM_USE_TIM4 set to TRUE in your mcuconf.h. + If you use FSMC, define in your board file GDISP_USE_FSMC. If you use DMA, + define GDISP_USE_DMA. d) The following are optional - define them if you are not using the defaults below: #define GDISP_SCREEN_WIDTH 320 -- cgit v1.2.3