From 5a25b2b7fb257a95fb97502c330364c188242b6c Mon Sep 17 00:00:00 2001
From: Joel Bodenmann <joel@unormal.org>
Date: Sat, 22 Jun 2013 05:00:48 +0200
Subject: Added FT5x06 GINPUT driver

---
 .../touch/FT5x06/ginput_lld_mouse_board_example.h  | 72 ++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h

(limited to 'drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h')

diff --git a/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h b/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h
new file mode 100644
index 00000000..19e824e5
--- /dev/null
+++ b/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://chibios-gfx.com/license.html
+ */
+
+/**
+ * @file    drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_example.h
+ * @brief   GINPUT Touch low level driver source for the FT5x06 on the example board.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static void init_board(void) {
+	/* Code here */
+	#error "ginputFT5x06: You must supply a definition for init_board for your board"
+}
+
+/**
+ * @brief   Check whether an interrupt is raised
+ * @return	TRUE if there is an interrupt signal present
+ *
+ * @notapi
+ */
+static inline bool_t getpin_irq(void) {
+	/* Code here */
+	#error "ginputFT5x06: You must supply a definition for getpin_irq for your board"
+}
+
+/**
+ * @brief	Write a value into a certain register
+ *
+ * @param[in] reg	The register address
+ * @param[in] n		The amount of bytes (one or two)
+ * @param[in] val	The value
+ *
+ * @notapi
+ */
+static void write_reg(uint8_t reg, uint8_t n, uint16_t val) {
+	/* Code here */
+	#error "ginputFT5x06: You must supply a definition for write_reg for your board"
+}
+
+/**
+ * @brief	Read the value of a certain register
+ *
+ * @param[in] reg	The register address
+ * @param[in] n		The amount of bytes (one or two)
+ *
+ * @return Data read from device (one byte or two depending on n param)
+ *
+ * @notapi
+ */
+static uint16_t read_reg(uint8_t reg, uint8_t n) {
+	/* Code here */
+	#error "ginputFT5x06: You must supply a definition for read_reg for your board"
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
+
-- 
cgit v1.2.3