From 08e1b0ebc7a5b9a960994e16710465dfb67f66ee Mon Sep 17 00:00:00 2001 From: Joel Bodenmann Date: Fri, 28 Mar 2014 19:45:08 +0100 Subject: Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation. Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction. --- drivers/ginput/touch/MCU/ginput_lld_mouse.c | 39 ----------------------------- 1 file changed, 39 deletions(-) (limited to 'drivers/ginput/touch/MCU/ginput_lld_mouse.c') diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse.c b/drivers/ginput/touch/MCU/ginput_lld_mouse.c index d7a2e314..ad2519e4 100644 --- a/drivers/ginput/touch/MCU/ginput_lld_mouse.c +++ b/drivers/ginput/touch/MCU/ginput_lld_mouse.c @@ -5,16 +5,6 @@ * http://ugfx.org/license.html */ -/** - * @file drivers/ginput/touch/MCU/ginput_lld_mouse.c - * @brief GINPUT Touch low level driver source for the MCU. - * - * @defgroup Mouse Mouse - * @ingroup GINPUT - * - * @{ - */ - #include "gfx.h" #if (GFX_USE_GINPUT && GINPUT_NEED_MOUSE) /*|| defined(__DOXYGEN__)*/ @@ -25,13 +15,6 @@ static uint16_t sampleBuf[7]; -/** - * @brief 7-point median filtering code for touchscreen samples - * - * @note This is an internally used routine only. - * - * @notapi - */ static void filter(void) { uint16_t temp; int i,j; @@ -48,31 +31,10 @@ static void filter(void) { } } -/** - * @brief Initialise the mouse/touch. - * - * @notapi - */ void ginput_lld_mouse_init(void) { init_board(); } -/** - * @brief Read the mouse/touch position. - * - * @param[in] pt A pointer to the structure to fill - * - * @note We use a 7 sample medium filter on each coordinate to remove analogue noise. - * @note During touch transition the ADC can return some very strange - * results. To fix this behaviour we don't return until - * we have tested the touch is in the same state at both the beginning - * and the end of the reading. - * @note Whilst x and y can return readings in any range so long as it fits in 16 bits, - * the z value must be ranged by the board file to be a rough percentage. Anything - * greater than 80% pressure is a touch. - * - * @notapi - */ void ginput_lld_mouse_get_reading(MouseReading *pt) { uint16_t i; @@ -116,4 +78,3 @@ void ginput_lld_mouse_get_reading(MouseReading *pt) { } #endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */ -/** @} */ -- cgit v1.2.3