diff options
Diffstat (limited to 'src/base/abci/abc.c')
| -rw-r--r-- | src/base/abci/abc.c | 218 |
1 files changed, 214 insertions, 4 deletions
diff --git a/src/base/abci/abc.c b/src/base/abci/abc.c index 72fcafe2..933f9778 100644 --- a/src/base/abci/abc.c +++ b/src/base/abci/abc.c @@ -23326,7 +23326,11 @@ int Abc_CommandSatoko( Abc_Frame_t * pAbc, int argc, char ** argv ) satoko_default_opts(&opts); Extra_UtilGetoptReset(); - while ( ( c = Extra_UtilGetopt( argc, argv, "Chv" ) ) != EOF ) +#ifdef SATOKO_ACT_VAR_FIXED + while ( ( c = Extra_UtilGetopt( argc, argv, "CPDEFGHIJKLMNOQRSTUhv" ) ) != EOF ) +#else + while ( ( c = Extra_UtilGetopt( argc, argv, "CPDEFGHIJKLMNOQRShv" ) ) != EOF ) +#endif { switch ( c ) { @@ -23341,6 +23345,184 @@ int Abc_CommandSatoko( Abc_Frame_t * pAbc, int argc, char ** argv ) if ( opts.conf_limit < 0 ) goto usage; break; + case 'P': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-P\" should be followed by an integer.\n" ); + goto usage; + } + opts.prop_limit = atoi(argv[globalUtilOptind]); + globalUtilOptind++; + if ( opts.prop_limit < 0 ) + goto usage; + break; + case 'D': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-D\" should be followed by an float.\n" ); + goto usage; + } + opts.f_rst = atof(argv[globalUtilOptind]); + globalUtilOptind++; + if ( opts.f_rst < 0 ) + goto usage; + break; + case 'E': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-E\" should be followed by an float.\n" ); + goto usage; + } + opts.b_rst = atof(argv[globalUtilOptind]); + globalUtilOptind++; + if ( opts.b_rst < 0 ) + goto usage; + break; + case 'F': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-F\" should be followed by an integer.\n" ); + goto usage; + } + opts.fst_block_rst = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'G': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-G\" should be followed by an integer.\n" ); + goto usage; + } + opts.sz_lbd_bqueue = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'H': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-H\" should be followed by an integer.\n" ); + goto usage; + } + opts.sz_trail_bqueue = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'I': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-I\" should be followed by an integer.\n" ); + goto usage; + } + opts.n_conf_fst_reduce = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'J': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-J\" should be followed by an integer.\n" ); + goto usage; + } + opts.inc_reduce = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'K': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-K\" should be followed by an integer.\n" ); + goto usage; + } + opts.inc_special_reduce = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'L': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-L\" should be followed by an integer.\n" ); + goto usage; + } + opts.lbd_freeze_clause = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'M': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-M\" should be followed by an integer.\n" ); + goto usage; + } + opts.learnt_ratio = atof(argv[globalUtilOptind]) / 100; + globalUtilOptind++; + if ( opts.learnt_ratio < 0 ) + goto usage; + break; + case 'N': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-M\" should be followed by an integer.\n" ); + goto usage; + } + opts.garbage_max_ratio = atof(argv[globalUtilOptind]) / 100; + globalUtilOptind++; + if ( opts.garbage_max_ratio < 0 ) + goto usage; + break; + case 'O': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-O\" should be followed by an integer.\n" ); + goto usage; + } + opts.clause_max_sz_bin_resol = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'Q': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-O\" should be followed by an integer.\n" ); + goto usage; + } + opts.clause_min_lbd_bin_resol = (unsigned)atoi(argv[globalUtilOptind]); + globalUtilOptind++; + break; + case 'R': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-R\" should be followed by an float.\n" ); + goto usage; + } + opts.clause_decay = atof(argv[globalUtilOptind]); + globalUtilOptind++; + if ( opts.clause_decay < 0 ) + goto usage; + break; + case 'S': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-S\" should be followed by an float.\n" ); + goto usage; + } + opts.var_decay = atof(argv[globalUtilOptind]); + globalUtilOptind++; + if ( opts.var_decay < 0 ) + goto usage; + break; +#ifdef SATOKO_ACT_VAR_FIXED + case 'T': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-T\" should be followed by an float.\n" ); + goto usage; + } + opts.var_act_limit = (unsigned)strtol(argv[globalUtilOptind], NULL, 16); + globalUtilOptind++; + break; + case 'U': + if ( globalUtilOptind >= argc ) + { + Abc_Print( -1, "Command line switch \"-U\" should be followed by an float.\n" ); + goto usage; + } + opts.var_act_rescale = (unsigned)strtol(argv[globalUtilOptind], NULL, 16); + globalUtilOptind++; + break; +#endif case 'h': goto usage; case 'v': @@ -23379,9 +23561,37 @@ int Abc_CommandSatoko( Abc_Frame_t * pAbc, int argc, char ** argv ) } usage: - Abc_Print( -2, "usage: satoko [-CILDE num] [-hv]<file>.cnf\n" ); +#ifdef SATOKO_ACT_VAR_FIXED + Abc_Print( -2, "usage: satoko [-CPDEFGHIJKLMNOQRSTU num] [-hv]<file>.cnf\n" ); +#else + Abc_Print( -2, "usage: satoko [-CPDEFGHIJKLMNOQRS num] [-hv]<file>.cnf\n" ); +#endif Abc_Print( -2, "\t-C num : limit on the number of conflicts [default = %d]\n", opts.conf_limit ); - Abc_Print( -2, "\t-v : prints verbose information [default = %s]\n", opts.verbose? "yes": "no" ); + Abc_Print( -2, "\t-P num : limit on the number of propagations [default = %d]\n", opts.conf_limit ); + Abc_Print( -2, "\n\tConstants used for restart heuristic:\n"); + Abc_Print( -2, "\t-D num : Constant value used by restart heuristics in forcing restarts [default = %f]\n", opts.f_rst ); + Abc_Print( -2, "\t-E num : Constant value used by restart heuristics in blocking restarts [default = %f]\n", opts.b_rst ); + Abc_Print( -2, "\t-F num : Lower bound n.of conflicts for start blocking restarts [default = %d]\n", opts.fst_block_rst ); + Abc_Print( -2, "\t-G num : Size of the moving avarege queue for LBD (force restart) [default = %d]\n", opts.sz_lbd_bqueue ); + Abc_Print( -2, "\t-H num : Size of the moving avarege queue for Trail size (block restart) [default = %d]\n", opts.sz_trail_bqueue ); + Abc_Print( -2, "\n\tConstants used for clause database reduction heuristic:\n"); + Abc_Print( -2, "\t-I num : N.of conflicts before first clause databese reduction [default = %d]\n", opts.n_conf_fst_reduce ); + Abc_Print( -2, "\t-J num : Increment to reduce [default = %d]\n", opts.inc_reduce ); + Abc_Print( -2, "\t-K num : Special increment to reduce [default = %d]\n", opts.inc_special_reduce ); + Abc_Print( -2, "\t-L num : Protecs clauses from deletion for one turn if its LBD is lower [default = %d]\n", opts.lbd_freeze_clause ); + Abc_Print( -2, "\t-M num : Percentage of learned clauses to remove [default = %d]\n", ( int )( 100 * opts.learnt_ratio ) ); + Abc_Print( -2, "\t-N num : Max percentage of garbage in clause database [default = %d]\n", ( int )( 100 * opts.garbage_max_ratio ) ); + Abc_Print( -2, "\n\tConstants used for binary resolution (clause minimization):\n"); + Abc_Print( -2, "\t-O num : Max clause size for binary resolution [default = %d]\n", opts.clause_max_sz_bin_resol ); + Abc_Print( -2, "\t-Q num : Min clause LBD for binary resolution [default = %d]\n", opts.clause_min_lbd_bin_resol ); + Abc_Print( -2, "\n\tConstants used for branching (VSIDS heuristic):\n"); + Abc_Print( -2, "\t-R num : Clause activity decay factor (when using float clause activity) [default = %f]\n", opts.clause_decay ); + Abc_Print( -2, "\t-S num : Varibale activity decay factor [default = %f]\n", opts.var_decay ); +#ifdef SATOKO_ACT_VAR_FIXED + Abc_Print( -2, "\t-T num : Variable activity limit valeu [default = 0x%08X]\n", opts.var_act_limit ); + Abc_Print( -2, "\t-U num : Variable activity re-scale factor [default = 0x%08X]\n", opts.var_act_rescale ); +#endif + Abc_Print( -2, "\n\t-v : prints verbose information [default = %s]\n", opts.verbose? "yes": "no" ); Abc_Print( -2, "\t-h : print the command usage\n"); return 1; } @@ -38223,7 +38433,7 @@ int Abc_CommandAbc9Cone( Abc_Frame_t * pAbc, int argc, char ** argv ) if ( fExtractAll ) { char Buffer[1000]; - Gia_Obj_t * pObj; + Gia_Obj_t * pObj; int i, nDigits = Abc_Base10Log(Gia_ManPoNum(pAbc->pGia)); Gia_ManForEachPo( pAbc->pGia, pObj, i ) { |