aboutsummaryrefslogtreecommitdiffstats
path: root/spi25.c
diff options
context:
space:
mode:
Diffstat (limited to 'spi25.c')
-rw-r--r--spi25.c22
1 files changed, 11 insertions, 11 deletions
diff --git a/spi25.c b/spi25.c
index 083d85f5..e21ab78e 100644
--- a/spi25.c
+++ b/spi25.c
@@ -479,7 +479,7 @@ int spi_chip_erase_60(struct flashctx *flash)
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -515,7 +515,7 @@ int spi_chip_erase_c7(struct flashctx *flash)
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -557,7 +557,7 @@ int spi_block_erase_52(struct flashctx *flash, unsigned int addr,
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -604,7 +604,7 @@ int spi_block_erase_d8(struct flashctx *flash, unsigned int addr,
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -649,7 +649,7 @@ int spi_block_erase_d7(struct flashctx *flash, unsigned int addr,
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -692,7 +692,7 @@ int spi_block_erase_20(struct flashctx *flash, unsigned int addr,
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
@@ -805,7 +805,7 @@ static int spi_write_status_register_flag(struct flashctx *flash, int status, co
* 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed.
*/
programmer_delay(100 * 1000);
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) {
+ while (spi_read_status_register(flash) & SPI_SR_WIP) {
if (++i > 490) {
msg_cerr("Error: WIP bit after WRSR never cleared\n");
return TIMEOUT_ERROR;
@@ -1035,7 +1035,7 @@ int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite);
if (rc)
break;
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
if (rc)
@@ -1062,7 +1062,7 @@ int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start,
result = spi_byte_program(flash, i, buf[i - start]);
if (result)
return 1;
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
@@ -1157,7 +1157,7 @@ int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start,
*/
return result;
}
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
/* We already wrote 2 bytes in the multicommand step. */
@@ -1169,7 +1169,7 @@ int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start,
cmd[2] = buf[pos++ - start];
spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0,
cmd, NULL);
- while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP)
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}