aboutsummaryrefslogtreecommitdiffstats
path: root/82802ab.c
Commit message (Collapse)AuthorAgeFilesLines
* 82802ab.c: Remove duplicated checkAngel Pons2020-05-131-3/+3
| | | | | | | | | | Change-Id: I5d511d7ec254bdbd9926e6d8efc308fb2339cb81 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/38661 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Fix -Wsign-compare troubleNico Huber2019-07-311-3/+3
| | | | | | | | | | | Mostly by changing to `unsigned` types where applicable, sometimes `signed` types, and casting as a last resort. Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Refine physical address mapping of flash chipsStefan Tauner2014-08-301-3/+0
| | | | | | | | | | | | | | | | | | - Create distinct functions for mapping and unmapping for flash chips. - Map only when needed: map before probing and unmap immediately after it. Map again when a single chip was probed successfully before taking any actual actions and clean up afterwards. - Map special function chip registers centrally together with flash space instead of within (some) probing methods after successful probes. - Save the used base addresses of the mappings in struct flashctx as well. - Do not try to (un)map the zero-sized chip definitions that are merely hacks. This also fixes the printing of wrong warnings for these chip definitions introduced in r1765. Corresponding to flashrom svn r1847. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Unify non-shifted and shifted JEDEC accessCarl-Daniel Hailfinger2014-08-081-1/+1
| | | | | | | | | | | | | | | | | | Some Parallel bus chips have a 16-bit mode and an 8-bit mode. They use normal JEDEC addresses for 16-bit mode and shifted addresses (by 1 bit) for 8-bit mode. Some programmers can access them in 16-bit mode, but on all flashrom-supported programmers so far, we access them in 8-bit mode. This means we have to shift the addresses but apart from the addresses we can share the code. This patch makes this possible by checking the chip's FEATURE_ADDR_SHIFTED flag in common JEDEC functions and applying the right addresses respectively. Corresponding to flashrom svn r1840. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor unlocking of many chips with locking at register space address +2Carl-Daniel Hailfinger2014-08-031-11/+0
| | | | | | | | | | | This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families. The erase and write test status bits of all affected chips have been reset. Corresponding to flashrom svn r1833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-091-2/+1
| | | | | | | | | | Corresponding to flashrom svn r1789. Inspired by and mostly based on a patch Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Cleanup ST M50 driverStefan Tauner2013-09-121-0/+1
| | | | | | | | | | | | | | | There are two locking strategies used by this umbrella family, one uniform and one that matches the sector layout of the chip. Refactor the functions involved and rename the overly complicated file to just stm50.c and the functions accordingly. This fixes unlocking of some of the non-uniform chips and gets rid of the abuse of page_size. Corresponding to flashrom svn r1736. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Make struct flashchip a field in struct flashctx instead of a complete copyCarl-Daniel Hailfinger2012-08-251-6/+6
| | | | | | | | | | | | All the driver conversion work and cleanup has been done by Stefan. flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel. Corresponding to flashrom svn r1579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-34/+35
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-7/+7
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-1/+1
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-1/+1
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the Sharp LH28F008BJT-BTLZ1 chipMattias Mattsson2011-08-251-0/+55
| | | | | | | | | | Tested by Mattias Mattsson <vitplister@gmail.com> on a PowerPC box. Corresponding to flashrom svn r1420. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-8/+8
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Move erase verification to generic codeCarl-Daniel Hailfinger2011-06-261-5/+1
| | | | | | | | | | | | Erase functions are no longer called from chip drivers and thus their internal erase verification can be moved to generic code. This also makes it easier to skip the verify step if desired and to differentiate between failed command submission and failed erase verification. Corresponding to flashrom svn r1353. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Switch all flash chips to partial writeCarl-Daniel Hailfinger2010-10-131-7/+2
| | | | | | | | | | | | | | | The inner write functions which handle partial write are renamed to the original name of their wrappers. The write wrappers are removed. Corresponding to flashrom svn r1211. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Andrew Morgan <ziltro@ziltro.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Refactor remaining write wrappersCarl-Daniel Hailfinger2010-10-131-0/+1
| | | | | | | | | | | | | | | | | | | Kill duplicated code. Annotate write functions with their chunk size. Mark Fujitsu MBM29F400BC and ST M29F400BB as untested because their write code no longer uses a broken layout. Corresponding to flashrom svn r1210. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Simplify calls to inner write functionsCarl-Daniel Hailfinger2010-10-101-7/+1
| | | | | | | | | No behavioural changes, just equivalence transformations. Corresponding to flashrom svn r1209. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Unify chip write functionsCarl-Daniel Hailfinger2010-10-101-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The currently used write functions (wrappers) all use helpers which perform the actual write (inner functions). The signature of the write wrappers is: int write_chip(struct flashchip *flash, uint8_t * buf); The signature of the inner write functions varied a lot. This patch changes them to: int write_part(struct flashchip *flash, uint8_t *src, int start, int len); Did you know that flashrom has only 8 inner write functions for all flash chips? write_page_write_jedec_common write_sector_jedec_common write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new spi_aai_write_new write_page_82802ab write_page_m29f400bt Export all inner write functions. Change the function signature of wait_82802ab to eliminate single-use variables. Remove an error message in write_page_m29f400bt which was printed for every byte written regardless of success. Add sharplhf00l04.c to the list of flash chip drivers in the Makefile. While the functions in there are unused, I suspect we will need them later, and by hooking the file up we ensure that compilation won't break. Corresponding to flashrom svn r1208. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove progress printing from individual flash chip driversCarl-Daniel Hailfinger2010-10-081-9/+0
| | | | | | | | | | Progress printing should be handled in the generic code, and will end up there once partial write is possible. Corresponding to flashrom svn r1207. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move implicit erase out of chip driversCarl-Daniel Hailfinger2010-10-081-22/+0
| | | | | | | | | | | | | | | | | | Flashrom had an implicit erase-on-write for most flash chip and programmer drivers, but it was not entirely consistent. Some drivers had their own hand-rolled partial update functionality which made handling partial updates from generic code impossible. Move implicit erase out of chip drivers, and kill some dead erase functions at the same time. A full chip erase is now performed in the generic code for all flash chips on write, and after that the whole chip is written. Corresponding to flashrom svn r1206. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-2/+0
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Intel 28F004/28F400 supportMichael Karcher2010-04-031-36/+18
| | | | | | | | | | | | | | | | | Remove blockwise write for i82802ab chips. It will be reintroduced in post-0.9.2 in a generic way. This is needed to fix FWH-like chips with non-uniform sectors. These are: Intel 28F001 Sharp LHF00L04 ST M50FW002 ST M50LPW116 Corresponding to flashrom svn r991. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Convert chips' message printing to msg_c* Fixed suggestions by Carl-DanielSean Nelson2010-03-241-26/+27
| | | | | | | Corresponding to flashrom svn r982. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Check 82802AB probing results for flash contents tooCarl-Daniel Hailfinger2010-03-221-1/+15
| | | | | | | | | | | | | | | | | | | JEDEC ID probing checks the parity of the vendor ID and verifies that the ID differs from the flash chip contents. Add the same feature to 82802AB ID probing. This should reduce the number of lines we have to look at to determine if we're missing a chip definition or if we need a board enable. Just use grep on the log: grep -v "parity violation" To narrow it down further, try: grep -v "id1 is normal flash content, id2 is normal flash content" And of course you want to ignore the skipped probes: grep -v "skipped" The remaining lines are worth examining, and if those look bogus as well, you can bet that we just need a board enable. Corresponding to flashrom svn r971. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* In unlock_28f004s5, variable 'i' needs to be int...Sean Nelson2010-03-221-1/+2
| | | | | | | Corresponding to flashrom svn r967. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Fix a few typos from the last commitSean Nelson2010-03-221-2/+2
| | | | | | | Corresponding to flashrom svn r966. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* To access/read the lock bits, we use the same mode to read the chip idSean Nelson2010-03-221-0/+49
| | | | | | | | | | | | | | This patch looks into the write situation for the Intel 28F001BX-{B,T}. Looks like they're just a 82802ab page write. Unlock_28f004s5 has been changed to read all the lock bits and if at least one of the block lock bits are set, clear them all. If the master lock bit is set, we can't do anything about it, so we return. Corresponding to flashrom svn r965. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Unlock fixupSean Nelson2010-03-201-1/+1
| | | | | | | Corresponding to flashrom svn r961. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various JEDEC refactorings touching 82802ab.c, sharplhf00l04.c and ↵Sean Nelson2010-03-191-9/+18
| | | | | | | | | | | | | | | | | | | stm50flw0x0x.c Rename print_82802ab_status to print_status_82802ab add unlock_82802ab strip unlock code from erase_block_82802ab rename erase_82802ab_block to erase_block_80280ab delete sharplhf00l04.o from Makefile delete *_lhf00l04* from chipdrivers.h. add unlock_stm50flw0x0x delete wait_stm50flw0x0x delete write_page_stm50flw0x0x convert erase_stm50flw0x0x to erase_chip_stm50flw0x0x delete write_stm50flw0x0x add unlock_82802ab to two Intel chips with TEST_BAD_WRITE change the status of 82802AB, 82802AC, M50FW040, M50FW080 to TEST_OK_PR Corresponding to flashrom svn r948. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add FEATURE_REGISTERMAP to some more chips and change the use of various ↵Carl-Daniel Hailfinger2010-03-151-1/+2
| | | | | | | | | | | | | | | | | probing functions Add FEATURE_REGISTERMAP to * Intel 82802AB, 82802AC * Sharp LHF00L04 * SST SST49LF004C, SST49LF008C, SST49LF016C, SST49LF160C * ST M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B, M50FW002, M50FW016 M50FW040, M50FW080, M50LPW116. Make register mapping conditional on FEATURE_REGISTERMAP in 82802ab.c. Replace probe_49lfxxxc with probe_82802ab. Replace probe_28sf040 with probe_82802ab. Replace probe_sst_fwhub with probe_jedec. Add printlock_sst_fwhub to chips which used probe_sst_fwhub. Corresponding to flashrom svn r937. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Block eraser conversions and support for Eon EN25B seriesSean Nelson2010-01-091-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040 Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T Added minor Device IDs for Eon EN25Bxx{T,B} chips. Corresponding to flashrom svn r843. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine support for the JEDEC Software Data ProtectionMichael Karcher2009-11-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the extremely dangerous unprotect_jedec function which is not used at all within flashrom code, and renames the misleadingly named protect_jedec function to start_program_jedec. Calls to protect_jedec after flashing are removed, because a) on LPC chips, the command sent by protoct_jedec is not even in the datasheet and b) on parallel chips, the block write command issued before already contained the software protection sequence, so software protection is definitely enabled. This patch also removes two clones of protect_jedec Background: JEDEC Software Data Protection started as an optional feature, which was disabled on the first single-voltage-flash chips. The software data protection is the need to prefix a write with a magic "write enable" command, while without write protection every write access into the chip's address space modifies flash content. This magic write enable command also tells the flash chip that the programmer obviously support sending write-enable commands and turns off the "any write modifies flash content" mode. There also exist a two-command (6 writes) sequence that disables Software Data Protection completey, which should only ever be used to prepare updating with a device that can't handle software data protection. Corresponding to flashrom svn r783. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix all remaining issues reported by LLVM/clang's scan-buildStefan Reinauer2009-09-161-12/+11
| | | | | | | Corresponding to flashrom svn r723. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Unify some probe functions that basically correspond to probe_jedec()Carl-Daniel Hailfinger2009-09-051-23/+7
| | | | | | | | | | | | | | | | | | | | | | Use the correct reset sequence for 82802AB. Detailed explanation: The reset sequence before ID reading was correct, so ID always worked. But the reset sequence after ID reading was a copy-paste leftover from probe_jedec and didn't have any effect. I dug up flash_and_burn from the freebios-v1 tree and found out that 82802ab.c was indeed a copy of jedec.c with lots of experimental unannotated #if 0 and #if 1. About the wait_82802ab change: Before the patch, wait_82802ab entered read status mode, switched to ID mode, then tried an incorrect and unsupported JEDEC command to exit ID mode. Nobody ever saw that this failed because all subsequent function calls had the correct reset sequence at the beginning. With the patch, wait_82802ab enters read status mode, then switches back to read mode with the official reset command. Corresponding to flashrom svn r717. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Standardize on using __func__ instead of __FUNCTION__Uwe Hermann2009-09-021-1/+1
| | | | | | | | | | | | | | | The __func__ variant is standardized in C99 and recommended to be used instead of __FUNCTION__ in the gcc info page. Only _very_ old versions of gcc did not know about __func__, but we've been using both __func__ and __FUNCTION__ for a long while now, and nobody complained about this, so all our users seem to use recent enough compilers. Corresponding to flashrom svn r711. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Flashrom only checks for very few chips if the erase workedCarl-Daniel Hailfinger2009-06-151-8/+11
| | | | | | | | | | | | | | | | | | | And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Corresponding to flashrom svn r595. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Sometimes we want to read/write more than 4 bytes of chip content at onceCarl-Daniel Hailfinger2009-06-051-2/+9
| | | | | | | | | | | | | | | | | | | | Add chip_{read,write}n to the external flasher infrastructure which read/write n bytes at once. Fix a few places where the code used memcpy/memcmp although that is strictly impossible with external flashers. Place a FIXME in the layout.c code because usage is not totally clear and needs to be fixed to support external flashers. As a nice side benefit, we get a noticeable speedup for builtin flash reading which is now a memcpy() of the full flash area instead of a series of single-byte reads. Corresponding to flashrom svn r579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add programmer-specific delay functionsCarl-Daniel Hailfinger2009-06-051-5/+5
| | | | | | | | | | | Add external programmer delay functions so external programmers can handle the delay on their own if needed. Corresponding to flashrom svn r578. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-2/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Introduce a type "chipaddr" to abstract the offsets within flash regionsCarl-Daniel Hailfinger2009-05-161-7/+7
| | | | | | | | | | | | | | | | | | | Use chipaddr instead of volatile uint8_t * because when we access chips in external flashers, they are not accessed via pointers at all. Benefits: This allows us to differentiate between volatile machine memory accesses and flash chip accesses. It also enforces usage of chip_{read,write}[bwl] to access flash chips, so nobody will unintentionally use pointers to access chips anymore. Some unneeded casts are removed as well. Grepping for chip operations and machine memory operations doesn't yield any false positives anymore. Compile tested on 32 bit and 64 bit Linux. Corresponding to flashrom svn r519. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* FreeBSD definitions of (read|write)[bwl] collide with our ownCarl-Daniel Hailfinger2009-03-061-27/+27
| | | | | | | | | | | | Before we attempt trickery, we can simply rename the accessor functions. Patch created with the help of Coccinelle. Corresponding to flashrom svn r420 and coreboot v2 svn r3984. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <idwer_v@hotmail.com> Acked-by: Patrick Georgi <patrick@georgi-clan.de>
* Use helper functions to access flash chipsCarl-Daniel Hailfinger2009-03-051-27/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now we perform direct pointer manipulation without any abstraction to read from and write to memory mapped flash chips. That makes it impossible to drive any flasher which does not mmap the whole chip. Using helper functions readb() and writeb() allows a driver for external flash programmers like Paraflasher to replace readb and writeb with calls to its own chip access routines. This patch has the additional advantage of removing lots of unnecessary casts to volatile uint8_t * and now-superfluous parentheses which caused poor readability. I used the semantic patcher Coccinelle to create this patch. The semantic patch follows: @@ expression a; typedef uint8_t; volatile uint8_t *b; @@ - *(b) = (a); + writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + readb(b) @@ type T; T b; @@ ( readb | writeb ) (..., - (T) - (b) + b ) In contrast to a sed script, the semantic patch performs type checking before converting anything. Tested-by: Joe Julian Corresponding to flashrom svn r418 and coreboot v2 svn r3971. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
* Beautify flash chip ID verbose printout a little, always use %02xPeter Stuge2009-01-251-1/+1
| | | | | | | Corresponding to flashrom svn r390 and coreboot v2 svn r3895. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* 82802ab: touch only blocks that need updatingClaus Gindhart2008-04-241-7/+27
| | | | | | | | | | | | | | | Flash pages, which where excluded from updating using the exclude or the layout option, as well as areas, whose flash contents already contain the desired data, will be skipped. These ensures absolute data security of critical areas (BIOS boot block), e.g. against a sudden power off or a CPU hangup during flashing. As a nice side effect, it speeds up the flash process, if the BIOS to be flashed is very similar to the version in flash. Corresponding to flashrom svn r217 and coreboot v2 svn r3260. Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Revert the delete of 82802ab.c in r3137Carl-Daniel Hailfinger2008-03-141-0/+186
| | | | | | | Corresponding to flashrom svn r204 and coreboot v2 svn r3140. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Drop 82802ab.c as it is identical to sharplhf00l04.cCarl-Daniel Hailfinger2008-03-131-186/+0
| | | | | | | Corresponding to flashrom svn r201 and coreboot v2 svn r3137. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>