| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SATA controller matched in the board enable is not always present
with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending
on board revision/edition or BIOS settings an ICH9 SATA RAID controller
appears instead. This patches matches on the SMBus function in the
south bridge instead of the SATA controller.
Non-working board reported by: Gunter Keilholz <gunter.keilholz@googlemail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003591.html
Corresponding to flashrom svn r1108.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-July/003889.html
Corresponding to flashrom svn r1107.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: Alex Loktionoff <oxy-loktionoff@mail.ru>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html
No success report, so committed as untested.
Corresponding to flashrom svn r1106.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Non-working board reported by: Anders Jenbo <anders@jenbo.dk>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html
no success report, so committed as untested.
Corresponding to flashrom svn r1105.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1103.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-July/003869.html
Corresponding to flashrom svn r1102.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Mattias Mattsson <vitplister@gmail.com>
|
|
|
|
|
|
|
|
|
| |
No response from reporter - committed as "untested".
Corresponding to flashrom svn r1101.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1100.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: František Kučera <linux@frantovo.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Needed on the original Xbox running Xebian and a few other ancient
systems.
Corresponding to flashrom svn r1088.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Alec Wright <alecjw@member.fsf.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Autodetect the ITE IT8705 Super I/O and enable flash writes if it
performs LPC->Parallel translation. Remove board enables which triggered
the IT8705 write enable manually. Change the IT87 SPI special case to
cover IT87 LPC->SPI and LPC->Parallel translation.
Corresponding to flashrom svn r1073.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Syntax SV266A.
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested on Shuttle AK38N, all operations work fine.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
r1063 had several issues: The PCI IDs for this board are copy/pasted from
the A8N and plain wrong for this board and the board enable is marked as
tested although it isn't. Finally the board description was slightly
wrong and the URL missing.
Corresponding to flashrom svn r1071.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
| |
Change the match for the HP DL145 G3 to avoid matching on the DL165 G6.
Corresponding to flashrom svn r1065.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1064.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1063.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch unifies the code for different Winbond W83627-family chips,
to be applied before I add another W83627 GPIO raise function.
After the Ack I added the check for unimplemented GPIO ports, but still
dared to reuse the ack.
Corresponding to flashrom svn r1062.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Fix compiler error (bad forward port in r1040).
Corresponding to flashrom svn r1042.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Test report is
http://www.coreboot.org/pipermail/flashrom/2010-April/002967.html
Corresponding to flashrom svn r1041.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Tested-by: Valentine "Pegasus rider" Yatsenko <mr.qweo@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Reporter/owner of that board: oscar <oshikore@gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html
Corresponding to flashrom svn r1040.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every board-enable function is passed a 'const char *name' (board name)
which is totally useless as the board name was already printed by flashrom
at that point. Also, 95% or so of the board-enables don't use the
parameter anyway. So, drop it.
Corresponding to flashrom svn r1037.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.
Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At least it's addressed as 'Pro' in the list of boards, which requires
board_enable.
See also:
http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html
Corresponding to flashrom svn r1015.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1014.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1010.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Marc Bertens <mbertens@xs4all.nl>
|
|
|
|
|
|
|
|
|
| |
Read class info manually and store it in a separate variable.
Corresponding to flashrom svn r1004.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r993.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Tom Brand <worntreads@sbcglobal.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Corresponding to flashrom svn r985.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
a board enable
Move boards which had an IT87* SPI board enable from the board enable
list to the OK list.
Mark the Gigabyte GA-MA78GPM-DS2H as OK.
Change the it87spi forced port parameter to it87spiport=...
Fix incorrect indentation in the man page.
Tested by Ward Vandewege on both variants of the Gigabyte GA-M57SLI-S4
http://www.flashrom.org/pipermail/flashrom/2010-March/002712.html
Tested by 李彥學 (Ian-Xue Li) on the Gigabyte GA-MA78GPM-DS2H
http://www.flashrom.org/pipermail/flashrom/2010-March/002723.html
Corresponding to flashrom svn r983.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Abit VT6X4 / W29C020C: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002730.html
Fixes typo in comment and marks board-enable as tested (the flashrom
running on that machine was patched with the board enable that got
in later).
Asus A7V133 / Atmel AT29C010A: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002729.html
Adding "erase" to tested as there is only one erase function.
Corresponding to flashrom svn r975.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r962.
Signed-off-by: Daniel Brandt <dbr@mindglow.se>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r959.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Original patch by: Luc Verhaegen.
Corresponding to flashrom svn r958.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rebased.
IDs are ISA and SMBus.
Added DMI string to match 3 HP boards: Nagami, Nagami2, Nagami2L.
This could match any HP Nagami board. Needs testing.
Corresponding to flashrom svn r957.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This board (GA-MA74GM-S2H) has the same list of pciids as the GA-MA78M-S2H,
so I narroved search conditions by populating corresponding board_pciid_enable
entry for GA-MA78M-S2H with DMI pattern.
Untested!
Corresponding to flashrom svn r956.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r955.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
| |
The board enable for the VT6X4 committed in r950 actually depended on this commit.
Corresponding to flashrom svn r954.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r953.
Signed-off-by: James Lancaster <deathstalker@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Patch by Chris <zinx+flashrom@zenthought.org>
Corresponding to flashrom svn r952.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
This board has no subsystem IDs, but thankfully the DMI patch is in
now, which is a real life safer. There are *WAY* to many 440BX/PIIX4
boards out there to match this without DMI.
Corresponding to flashrom svn r951.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This board has *no* usable IDs at all, neither DMI nor PCI
subsystem IDs. You have to force it using "-m abit:vt6x4"
Try 3: really correct polarity of the GPIO
Corresponding to flashrom svn r950.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r949.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Lspci/flashrom/superiotool at
http://www.coreboot.org/pipermail/flashrom/2010-March/002579.html
Corresponding to flashrom svn r947.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
This board has a supported chipset and a supported bios, but it's
connected indirectly through IT8716 and not recognized.
Corresponding to flashrom svn r935.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix coding-style, whitespace, and indentation in a few places.
- Consistently use the same spelling ("Super I/O") everywhere.
Corresponding to flashrom svn r933.
- Make some flashrom stdout output look a bit nicer.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Was introduced in r926. Found by Henrik Kretzschmar <henne@nachtwindheim.de>.
Corresponding to flashrom svn r930.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Maciej Pijanka <maciej.pijanka@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
I have an ASUS A7V8X-X, the BIOS programming requires a write-enable. It
has an IT8712F, just like the A7V600-X.
Corresponding to flashrom svn r929.
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
| |
This also checks the testedness of boards in all cases, not just for
PCI/DMI detection.
Corresponding to flashrom svn r926.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|