aboutsummaryrefslogtreecommitdiffstats
path: root/buspirate_spi.c
Commit message (Collapse)AuthorAgeFilesLines
* spi_master: Use new API to register shutdown functionAnastasia Klimchuk2021-08-251-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows spi masters to register shutdown function in spi_master struct, which means there is no need to call register_shutdown in init function, since this call is now a part of register_spi_master. As a consequence of using new API, two things are happening here: 1) No resource leakage anymore in case register_shutdown() would fail, 2) Fixed propagation of register_spi_master() return values. Basic testing: when I comment out free(data) in linux_spi_shutdown, test fails with error ../linux_spi.c:235: note: block 0x55a4db276510 allocated here ERROR: linux_spi_init_and_shutdown_test_success leaked 1 block(s) Means, shutdown function is invoked. BUG=b:185191942 TEST= 1) builds and ninja test including CB:56911 2) On ARMv7 device flashrom -p linux_spi -V -> using linux_spi, chip found 3) On x86_64 AMD device flashrom -p internal -V -> this is actually using sb600spi, chip found Change-Id: Ib60300f9ddb295a255d5ef3f8da0e07064207140 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* spi_master: Move shutdown function above spi_master structAnastasia Klimchuk2021-08-171-32/+32
| | | | | | | | | | | | | | | | | | | This patch prepares spi masters to use new API which allows to register shutdown function in spi_master struct. See also later patch in this chain, where spi masters are converted to new API. BUG=b:185191942 TEST=builds and ninja test Comparing flashrom binary before and after the patch, make clean && make CONFIG_EVERYTHING=yes VERSION=none binary is the same Change-Id: I50716686552b4ddcc6089d5afadb19ef59d9f9b4 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* buspirate_spi: Use non-zero return value from buspirate_sendrecvAnastasia Klimchuk2021-06-301-15/+5
| | | | | | | | | | | | | | | | | | Return values for buspirate_sendrecv come from serialport_write and serialport_read, and those return 1s for any error. No need to explicity assign ret = 1, because it is already 1 for error. Follow up on commit 751afa88a7f22487069665c5d206ae490f158231 where this idea was suggested. BUG=b:185191942 TEST=builds Change-Id: I31fd70f607dc965d5cac1cd0116faa447dbc177a Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/55818 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* buspirate: Add psus optionJeremy Kerr2021-06-211-0/+16
| | | | | | | | | | | | This change adds a 'psus=<on|off>' option, to control the external Vcc state of the bus pirate, allowing hardware where the SPI flash chip is powered by the 3V3/5V lines directly. Change-Id: I8a7d4b40c0f7f04f6976f6757f05b61f2c9958f9 Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* buspirate_spi.c: Drop bp_ prefix for spi data struct membersAnastasia Klimchuk2021-06-201-13/+13
| | | | | | | | | | | | | | | The name of the struct type already contains bp_ prefix, so prefix doesn't need to be repeated in members name. BUG=b:185191942 TEST=builds Change-Id: Ia463e3f58497e4b10be072bdd29244f4868098e7 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* buspirate_spi.c: Refactor singleton states into reentrant patternAnastasia Klimchuk2021-06-201-19/+42
| | | | | | | | | | | | | | | | | | | Move global singleton states into a struct and store within the spi_master data field for the life-time of the driver. This is one of the steps on the way to move spi_master data memory management behind the initialisation API, for more context see other patches under the same topic "register_master_api". BUG=b:185191942 TEST=builds Change-Id: I418bbfff15fb126b042fbc9be09dbf59f4d243b8 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52958 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* buspirate_spi.c: Separate shutdown from failed init cleanupAnastasia Klimchuk2021-06-201-49/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Shutdown function was covering two different jobs here: 1) the actual shutdown which is run at the end of the driver's lifecycle and 2) cleanup in cases when initialisation failed. Now, shutdown is only doing its main job (#1), and the driver itself is doing cleanup when init fails (#2). The good thing is that now resources are released/closed immediately in cases when init fails (vs shutdown function which was run at some point later), and the driver leaves clean space after itself if init fails. And very importantly this unlocks API change which plans to move register_shutdown inside register master API, see https://review.coreboot.org/c/flashrom/+/51761 BUG=b:185191942 TEST=builds Change-Id: I04d57e2552d23a1a4a906c68539f0ccefc13e8a0 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52877 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* programmer_table: move each entry to the associated programmer sourceThomas Heijligen2021-06-101-1/+12
| | | | | | | | | Change-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* programmer: Smoothen register_spi_master() APINico Huber2021-05-131-1/+1
| | | | | | | | | | | | | It was impossible to register a const struct spi_master that would point to dynamically allocated `data`. Fix that so that we won't have to create more mutable globals. Change-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* tree: Remove forward-declarations for spi mastersAnastasia Klimchuk2021-02-161-98/+93
| | | | | | | | | | | | | | | | | Reorder functions to avoid forward-declarations. It looks like for most of the spi masters this has already been done before, I covered remaining small ones in one patch. BUG=b:140394053 TEST=builds Change-Id: I23ff6b79d794876f73b327f18784ca7c04c32c84 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/50711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* const'ify flashctx to align signatures with cros flashromEdward O'Callaghan2020-04-301-4/+4
| | | | | | | | | | | | | | | | The ChromiumOS flashrom fork has since const'ify flashctx in a few places. This aligns the function signatures to match with downstream to ease forward porting patches out of downstream back into mainline flashrom. This patch is minimum viable alignment and so feedback is welcome. Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* tree: Enable -Wwrite-stringsJacob Garber2019-10-041-1/+1
| | | | | | | | | | | | | | | | When compiling, this warning gives string literals the type const char[] to help catch accidental modification (which is undefined behaviour). There currently aren't any instances of this in flashrom, so let's enable this warning to keep it that way. This requires adding const qualifiers to the declarations of several variables that work with string literals. Change-Id: I62d9bc194938a0c9a0e4cdff7ced8ea2e14cc1bc Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/flashrom/+/34577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* Fix -Wsign-compare troubleNico Huber2019-07-311-1/+2
| | | | | | | | | | | Mostly by changing to `unsigned` types where applicable, sometimes `signed` types, and casting as a last resort. Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
* spi: Drop spi_controller typeNico Huber2019-06-271-2/+1
| | | | | | | | | | Not needed anymore. Drop it fast before it encourages anyone to violate layers again! Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651 Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* buspirate_spi: Fix a missing error check during _init()Richard Hughes2019-01-051-0/+2
| | | | | | | | Change-Id: I17c6737853bf311b3f7aa9bfb10b54ce19e95ecc Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/30407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix typosElyes HAOUAS2018-08-191-1/+1
| | | | | | | | Change-Id: I20745d5f30f9577622e27abf2f45220f026f65ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* buspirate_spi: Tristate IOs when using using pullup=onMaxime Vincent2018-05-111-0/+4
| | | | | | | | | | Avoid putting 3.3V on IO pins when pullup=on to avoid damage to 1.8V chips. Signed-off-by: David Hendricks <david.hendricks@gmail.com> Change-Id: I9ac4c6b7a0079bb1022f2d70030a6eb29996108f Reviewed-on: https://review.coreboot.org/23864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix whitespace errorsElyes HAOUAS2018-04-241-1/+1
| | | | | | | | Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* buspirate_spi: Add support for variable serial speedsShawn Anastasio2018-01-261-11/+121
| | | | | | | | | | | | | | | | | | | | | | | | This patch sets the default baud rate for communication between the host device and the Bus Pirate for hardware versions 3.0 and greater to 2M baud. It also introduces the ability to manually set the baud rate via the added 'serialspeed' programmer parameter. This is done in two parts. Firstly, the requested serial speed is looked up in a table to determine the appropriate clock divisor and the divisor is sent to the bus pirate. Then, the system's baud rate for the selected serial port is set using serial.c's 'serialport_config'. This function's prototype had to be added to programmer.h. In testing, using the 2M baud rate was able to significantly decrease flash times (down from 20+ minutes to less than 2 minutes for an 8MB flash). Change-Id: I3706f17a94fdf056063f2ad4a5f0a219665cdcbf Signed-off-by: Shawn Anastasio <shawnanastasio@yahoo.com> Reviewed-on: https://review.coreboot.org/23057 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* spi_master: Introduce SPI_MASTER_4BA feature flagNico Huber2018-01-021-0/+1
| | | | | | | | | | | | | | | Add a feature flag SPI_MASTER_4BA to `struct spi_master` that advertises programmer-side support for 4-byte addresses in generic commands (and read/write commands if the master uses the default implementations). Set it for all masters that handle commands address-agnostic. Don't prefer native 4BA instructions if the master doesn't support them. Change-Id: Ife66e3fc49b9716f9c99cad957095b528135ec2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-8/+8
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* CID1130006: Memory leaks in buspirate_spi_init()Stefan Reinauer2014-04-261-1/+6
| | | | | | | | | | | The one in the error case of register_shutdown() was discovered while reviewing the other one found by Coverity and fixed by Stefan Reinauer. Corresponding to flashrom svn r1778. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Usleep() is not found in all versions of MinGW, use Sleep() on WindowsMaksim Kuleshov2013-04-051-1/+1
| | | | | | | | | | Handle long sleeps on non-Windows correctly. Corresponding to flashrom svn r1667. Signed-off-by: Maksim Kuleshov <mmcx@mail.ru> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add user interface to activate the Bus Pirate pull-up resistorsBrian Salcedo2013-01-031-11/+26
| | | | | | | | | | | | | | | | | | | | | | | When working with some flash chips using the Bus Pirate programmer, the use of the Bus Pirate's on-board pull-up resistors is sometimes necessary. On v3 hardware the use of said pull-up resistors requires the user to apply a voltage to the VPU pin of the Bus Pirate, and then command it to use them. For v4 hardware which supports also fixed internal 3.3V and 5V sources no documentation could be found. Here is a link to information pertaining to what this patch does: http://dangerousprototypes.com/docs/SPI_(binary)#0100wxyz_-_Configure_peripherals_w.3Dpower.2C_x.3Dpull-ups.2C_y.3DAUX.2C_z.3DCS Bonus: small cleanup of superfluous stack variables. Corresponding to flashrom svn r1641. Signed-off-by: Brian Salcedo <bsalcedo@gmx.us> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Brian Salcedo <bsalcedo@gmx.us> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix sp_openserport users on WindowsStefan Tauner2012-11-301-1/+1
| | | | | | | Corresponding to flashrom svn r1627. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Support the new fast SPI mode present in Bus Pirate firmware v5.5 or newerCarl-Daniel Hailfinger2012-11-011-13/+77
| | | | | | | Corresponding to flashrom svn r1621. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Some ISO C fixesCarl-Daniel Hailfinger2012-08-271-0/+1
| | | | | | | | | | | | | | | | | This patch just fixes a limited number of bits not conforming to c99 by using - __asm__ instead of just asm - {0} instead of {} for struct initialization - h_addr_list[0] instead of h_addr to access the host address in struct hostent - #include <strings.h> where needed (for ffs and strcasecmp) Based on a previous patch by Carl-Daniel. Corresponding to flashrom svn r1585. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Bus Pirate init cleanup and fixesCarl-Daniel Hailfinger2012-08-171-65/+134
| | | | | | | | | | | | | | | | | | | | | | | | | The Bus Pirate firmware (at least v6.1 and earlier) can't handle UART input buffer overflow in BBIO mode, and sending a sequence of 0x00 too fast apparently triggers such an UART input buffer overflow. Wait 10 ms after sending each 0x00 byte during init to give the Bus Pirate enough time to handle the input. This fixes a Bus Pirate hang if the previous flashrom run was aborted by the user. The Bus Pirate firmware v6.1 and earlier use the wrong (too slow) SPI speed if more than 2 MHz are requested. Automatically downgrade SPI speed to 2 MHz for affected firmware versions. Detect Bus Pirate hardware and firmware versions to allow quirk handling. The Bus Pirate init sequence has lots of open-coded sequences which wait for a given string on the serial line. Refactor them into buspirate_wait_for_string(). Corresponding to flashrom svn r1576. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove more exit callsNiklas Söderlund2012-07-301-1/+2
| | | | | | | | | | | | | | | | This patch removes the remaining exit calls from - sp_openserport - sp_opensocket - sp_docommand - internal_init Almost all of this was done by Niklas. Corresponding to flashrom svn r1557. Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+1
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Bus Pirate buffer management revampCarl-Daniel Hailfinger2012-06-081-67/+109
| | | | | | | | | | | | | The buffer management of the Bus Pirate driver has been revamped to use grow-only buffers with a reasonable initial default size so realloc() will not have to be called in normal operation. A side effect is the ability to switch to a static buffer without major hassle. Handle OOM gracefully. Corresponding to flashrom svn r1541. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick@georgi-clan.de>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-4/+10
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-1/+2
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove unneeded inclusions of chipdrivers.hStefan Tauner2011-08-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | This is related to the spi split patch as discussed in: http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364 the old commit (r914) log notes: "Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c" there still remain a few cases where chipdrivers.h is needed: dediprog.c (spi_read_chunked and spi_write_chunked) it87spi.c (due to spi_write_enable and spi_read_status_register) wbsio_spi.c (spi_programmer registration only) besides that, there are also non-spi files that do not need it. also, add flash.h to chipdrivers.h because it uses some types of it and remove flashchips.h from print.c Corresponding to flashrom svn r1414. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fixup of r1397Carl-Daniel Hailfinger2011-08-151-1/+3
| | | | | | | | | | | | | | - Mixing uninitialized and initialized local variables leads to confusion. - ft2232_spi error cases should have gotten some error handling, and that's the reason the curly braces were there. - Fixing typos/wording in some places would have been nice given that those places were touched anyway. Corresponding to flashrom svn r1413. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-12/+11
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a bunch of new/tested stuff and various small changes 4Cristian Măgherușan-Stanciu2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add Asus E35M1-I DELUXE to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006918.html - add Asus M3A to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007085.html - add Freetech P6F91i to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006800.html - add GA-M720-US3 to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007096.html - add GA-MA770-UD3 (rev. 2.1) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006879.html - add GA-965GM-S2 to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006746.html - add HP xw4400 (0A68h) to boards_known http://paste.flashrom.org/view.php?id=686 - add MSI MS-6566 (845 Ultra-C) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006908.html - add MSI MS-7698 (E350IA-E45) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/007003.html - add PCCHIPS M863G (V5.1A) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007084.html - modify the X8SIE entry in boards_known with the information from "fuzzy" http://paste.flashrom.org/view.php?id=669 - mark W29C020(C)/W29C022 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-June/006800.html - mark W49V002A as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007084.html - mark M25P128 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-June/006843.html - mark SST39SF010A as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007115.html - correct entries for GA-K8NS Pro-939 (was ultra before. thanks uwe!) - another tiny fix for "a small fix"/r1321 Without this you will get broken bus names "Unknow" and "Non-SP". Note to self: don't self-ack even fairly trivial patches. - fix spew output of spi_rems in spi25.c - add URL to ASUS M3A76-CM - rename all Winbond W25x chips to W25X - fixes some common misspellings/typos in comments: lenght->length 2 ocassional->occasional 1 unsucessfull->unsuccessful 1 upto->up to 5 Corresponding to flashrom svn r1367. the patch for M25P128 is Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> the typos are Signed-off-by: Peter Huewe <peterhuewe@gmx.de> everything else is Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-35/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation for CONFIG_INTERNAL=noCarl-Daniel Hailfinger2011-06-091-0/+5
| | | | | | | | | | | | CONFIG_INTERNAL implies Super I/O support and NEED_PCI. NEED_PCI is only used to guard PCI stuff which may be needed for external PCI-based programmers. That way, using #if NEED_PCI can be avoided inside #if CONFIG_INTERNAL. Corresponding to flashrom svn r1326. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill central list of SPI programmersMichael Karcher2011-05-111-3/+15
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-10/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Handle Bus Pirates already in bit banging mode correctlyCarl-Daniel Hailfinger2010-09-161-0/+21
| | | | | | | | | | | | | | | | | | | | Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Corresponding to flashrom svn r1178. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mattias Mattsson <vitplister@gmail.com>
* Speed up Bus Pirate by exploiting the FTDI FIFOCarl-Daniel Hailfinger2010-07-291-20/+22
| | | | | | | | | | | | | | | | | If we violate the raw SPI communication protocol requirements of the Bus Pirate (namely, waiting for the completion of one command before sending the next one), we can reduce the number of round trips by a factor of 3. The FT2232 chip present in the Bus Pirate has a big enough buffer (at least 128 bytes IIRC) to avoid overflows in the tiny buffer of the Bus Pirate PIC. Thanks to Daniel Flinkmann for sponsoring development of this patch. Corresponding to flashrom svn r1120. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Daniel Flinkmann <DFlinkmann@gmx.de> Acked-by: Daniel Flinkmann <dflinkmann@gmx.de>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use generic unlocking infrastructure for SPI chipsCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-12/+2
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-2/+2
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-14/+7
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 17:08:07 +0000