aboutsummaryrefslogtreecommitdiffstats
path: root/chipdrivers.h
Commit message (Collapse)AuthorAgeFilesLines
* Add support for SST SST25WF020A, SST25WF040B, SST25WF080BBen Gardner2015-11-221-0/+1
| | | | | | | | | | | | | | | | Apart from the strange ID (using Sanyo's vendor ID 0x62) the main difference from the plain SST25WF series is that they lack op codes 0xAD (AAI Word program) and 0x52 (32K erase). The smallest version does not support dual I/O operations either. SST25WF080B was tested under Linux with spidev. Corresponding to flashrom svn r1901. Tested-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix handling of write protection at register space address +2Stefan Tauner2014-12-201-1/+0
| | | | | | | | | | | | | | | Since r1833 we added the offset of the virtual register in several functions, which produced segfaults. This patch renames a few parameters and reorganizes/fixes various parts of the changelock_regspace2_block() function - hence the rather big diff. Thanks to Roman Lebedev for reporting this issue and testing numerous revisions of this patch. Corresponding to flashrom svn r1859. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify non-shifted and shifted JEDEC accessCarl-Daniel Hailfinger2014-08-081-6/+0
| | | | | | | | | | | | | | | | | | Some Parallel bus chips have a 16-bit mode and an 8-bit mode. They use normal JEDEC addresses for 16-bit mode and shifted addresses (by 1 bit) for 8-bit mode. Some programmers can access them in 16-bit mode, but on all flashrom-supported programmers so far, we access them in 8-bit mode. This means we have to shift the addresses but apart from the addresses we can share the code. This patch makes this possible by checking the chip's FEATURE_ADDR_SHIFTED flag in common JEDEC functions and applying the right addresses respectively. Corresponding to flashrom svn r1840. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 21Stefan Tauner2014-08-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by luxflow@live.com using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for a bunch of 29GL parallel flash chipsStefan Tauner2014-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | 29GL chips use a new 3-Byte device ID probing function at addresses 0x01, 0x0E, 0x0F. Flash chip families supported by this method include... - EON EN29GL - Gigadevice GD29GL (if they really exist) - ISSI (PMC) IS29GL - Macronix MX29GL (+MX68GL1G0F) - Spansion S29GL (+S70GL02G) - Winbond W29GL This patch adds respective flash chip definitions for chips up to 16 MB from Eon, ISSI, Macronix and Winbond. Bigger chips as well as those from Gigadevice and Spansion are left out. Corresponding to flashrom svn r1835. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refactor unlocking of many chips with locking at register space address +2Carl-Daniel Hailfinger2014-08-031-10/+9
| | | | | | | | | | | This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families. The erase and write test status bits of all affected chips have been reset. Corresponding to flashrom svn r1833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Sanyo LE25FW106Stefan Tauner2014-06-041-0/+1
| | | | | | | | | | | Also, add spi_disable_blockprotect_bp1_srwd(). Originally written and tested by The Raven <originalraven@hotmail.com>. Corresponding to flashrom svn r1818. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Combine block_erase*_en29lv640b and block_erase*_m29f400bt respectivelyStefan Tauner2014-06-011-4/+2
| | | | | | | | | | | | | | | This patch combines two identical block and chip erase functions respectively: - Merge block_erase_m29f400bt and block_erase_en29lv640b into erase_block_shifted_jedec. - Merge block_erase_chip_m29f400bt and block_erase_chip_en29lv640b into erase_chip_block_shifted_jedec. Leave their implementations in en29lv640b.c for now. Corresponding to flashrom svn r1808. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* jedec.c: constify a bit moreStefan Tauner2014-05-291-4/+2
| | | | | | | | | | Also, include chipdrivers.h to find conflicting types between exported declarations and actual implementations. Corresponding to flashrom svn r1805. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename some spi_prettyprint_status_register_* functionsStefan Tauner2014-05-271-4/+4
| | | | | | | | | | | | Spi_prettyprint_status_register_default_bpX -> spi_prettyprint_status_register_bpX_srwd Why was the default in there anyway? :) Corresponding to flashrom svn r1802. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for ESMT F25L32PAStefan Tauner2014-05-271-0/+1
| | | | | | | Corresponding to flashrom svn r1801. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-091-13/+13
| | | | | | | | | | Corresponding to flashrom svn r1789. Inspired by and mostly based on a patch Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Cleanup ST M50 driverStefan Tauner2013-09-121-3/+4
| | | | | | | | | | | | | | | There are two locking strategies used by this umbrella family, one uniform and one that matches the sector layout of the chip. Refactor the functions involved and rename the overly complicated file to just stm50.c and the functions accordingly. This fixes unlocking of some of the non-uniform chips and gets rid of the abuse of page_size. Corresponding to flashrom svn r1736. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for AT45CS1282Stefan Tauner2013-08-271-0/+1
| | | | | | | | | | | This one is even more strange than the AT45DB chips. Like the AT45DB321C it does not support any power-of-2 page sizes. There is only one asymmetrical eraser and that uses two opcodes. Corresponding to flashrom svn r1725. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for AT45DB321CStefan Tauner2013-08-271-0/+1
| | | | | | | | | | It seems like this model is one-of-a-kind... it shares some properties with the older versions of the AT45DB series as well as with new ones. Corresponding to flashrom svn r1724. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel AT45DB* chipsAidan Thornton2013-08-271-0/+12
| | | | | | | | Corresponding to flashrom svn r1723. Signed-off-by: Aidan Thornton <makosoft@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for remaining Numonyx (Micron) N25Q chipsNikolay Nikolaev2013-06-281-0/+3
| | | | | | | | | | | | | | | | | | | | Add... - N25Q128..3E - N25Q128..1E - N25Q256..1E (defunct due to addressing) - N25Q256..3E (defunct due to addressing) - N25Q512..1E (defunct due to addressing) - N25Q512..3E (defunct due to addressing) - N25Q00A..3G (defunct due to addressing) Also, refine existing family members. Corresponding to flashrom svn r1693. Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com> Reviewed-by: Steven Zakulec <spzakulec@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Spansion S25FL...S chipsNikolay Nikolaev2013-06-281-2/+2
| | | | | | | | | | | | | | | Add... - S25FL128S - S25FL256S uniform version (defunct due to addressing) - S25FL512S uniform version (defunct due to addressing) Merge Intel S33 status register functions with this one's. Corresponding to flashrom svn r1692. Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Eon EN25S seriesNikolay Nikolaev2013-06-281-0/+1
| | | | | | | | | | | | | | | | | | Add... - EN25S10 - EN25S20 - EN25S40 - EN25S80 - EN25S16 - EN25S32 - EN25S64 Corresponding to flashrom svn r1687. Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com> Reviewed-by: Steven Zakulec <spzakulec@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce spi_block_erase_db()Nikolay Nikolaev2013-06-281-0/+1
| | | | | | | | | | | | Used for page erase on some chips (e.g. Numonyx M45PE and Sanyo LF25FW series). Corresponding to flashrom svn r1682. Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com> Reviewed-by: Steven Zakulec <spzakulec@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce additional SPI status register helpersStefan Tauner2013-06-281-1/+5
| | | | | | | | | | | | | | | | | | - spi_prettyprint_status_register_default_welwip(): It just prettyprints the plain hex value and the welwip bits. - spi_prettyprint_status_register_default_bp4(): Prints the hex value, welwip, bp0-5 and srwd bits. - spi_disable_blockprotect_bp2_srwd(), - spi_disable_blockprotect_bp3_srwd() and spi_disable_blockprotect_bp4_srwd(): Three new common block unprotection functions for the frequent cases where there is a status register lock bit at bit #7 and some block protection bits at bits #2-#4, #2-#5 and #2-#6 respectively. Corresponding to flashrom svn r1681. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix unlocking function for most Atmel AT2[56]D* chipsStefan Tauner2013-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | I broke unlocking them correctly in r1635 while refactoring (NB: the commit log including the overly selfconfident statement about the "bug in spi_disable_blockprotect_at25df()"). Affected chips have per sector protection bits and the write protection bits in the status register do indicate if none, some or all sectors are protected. It is possible to globally (un)lock all sectors at once but in a way that was not anticipated when refactoring the spi25 unlocking functions into spi_disable_blockprotect_generic(). To globally unprotect not only the protection bits (2 and 3) have 0 to be written to them but also bits 4 and 5 which normally would not be touched by spi_disable_blockprotect_generic(). Some of the chips also support a permanent lockdown with fuses which we do not handle yet. To fix this without copying the whole method I introduce another mask parameter to spi_disable_blockprotect_generic() namely unprotect_mask. See verbose comments inline for details. Also, prettyprint the status register after trying to disable the block protection fails. Corresponding to flashrom svn r1679. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Chi Zhang <zhangchi866@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Update spi_get_erasefn_from_opcode()Stefan Tauner2013-05-011-3/+3
| | | | | | | | | | We forgot to add a few SPI erase functions to the helper function that is used for SFDP. Also, sort the declarations in the header. Corresponding to flashrom svn r1672. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine PMC Pm25LV seriesStefan Tauner2013-04-191-0/+1
| | | | | | | | | | | | | | | | | | | - Add missing bits and resort chips - Refine Pm25LV512(A) and Pm25LV010 Due to manufacturer ID continuation this one needs a new probing function: probe_spi_res3() which should be refactored in the future. The datasheet describes a very weird order of ID bytes: Vendor byte, model byte, vendor continuation byte. Let's pretend we did not read that or the datasheet is bogus (although the datasheet of the successor series describes the same but luckily additionally to RDID). - Add Pm25LV010A This was tested by Chi Zhang: http://paste.flashrom.org/view.php?id=1573 Corresponding to flashrom svn r1670. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel's AT25F series of SPI flash chipsStefan Tauner2012-12-291-0/+7
| | | | | | | | | | | | | | | | | | This adds support for the following chips: - AT25F512, AT25F512A, AT25F512B - AT25F1024, AT25F1024A - AT25F2048 - AT25F4096 Besides the definitions of the the chips in flashchips.c this includes - a dedicated probing method (probe_spi_at25f) - pretty printing methods (spi_prettyprint_status_register_at25f*), and - unlocking methods (spi_disable_blockprotect_at25f*) Corresponding to flashrom svn r1637. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel S33 series flash chipsStefan Tauner2012-12-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes: Bottom boot block: * 16Mb/2MB: QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8 * 32Mb/4MB: QB25F320S33B8, QH25F320S33B8 * 64Mb/8MB: QB25F640S33B8, QH25F640S33B8 Top boot block: * 16Mb/2MB: QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8 * 32Mb/4MB: QB25F320S33T8, QH25F320S33T8 * 64Mb/8MB: QB25F640S33T8, QH25F640S33T8 At least some seem to be marketed by other vendors (too?) but also with Intel's vendor ID. Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they support also erasing the top/bottom 8 8kB blocks with opcode 0x40. But since this command fails for all addresses outside those ranges, it is not easily implemented with flashrom's current code base and hence left out. Corresponding to flashrom svn r1636. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve SPI status register pretty printingStefan Tauner2012-12-291-24/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move all functions related to SPI status registers to a new file spi25_statusreg.c. This includes the generic as well as the SST-specific functions from spi25.c and the chip-specific functions from a25.c and at25.c. - introduce helper functions * spi_prettyprint_status_register_hex() * spi_prettyprint_status_register_bpl() * spi_prettyprint_status_register_plain() Use the latter on every compatible flash chip that has no better printlock function set and get rid of the implicit pretty printing in the SPI probing functions. - remove * spi_prettyprint_status_register_common() * spi_prettyprint_status_register_amic_a25lq032() because it can be fully substituted with spi_prettyprint_status_register_amic_a25l032(). * spi_prettyprint_status_register() (old switch, no longer needed) - promote and export * spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1(). * spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2(). * spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3(). - add #define TEST_BAD_REW and use it for a number of Atmel chips which had only TEST_BAD_READ set even though they dont have erasers or a write function set. Corresponding to flashrom svn r1634. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Winbond W39F010/W39L010/W39L020Kyösti Mälkki2012-10-281-0/+3
| | | | | | | | | | | | | | | | W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks. W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks. W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks. The W39F010 code was tested with a satasii programmer. The first write attempt after an erase returned with verify failure, but the second write attempt was succesful: http://paste.flashrom.org/view.php?id=1418 Corresponding to flashrom svn r1620. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel AT26DF041Stefan Tauner2012-10-271-0/+2
| | | | | | | | | | | | | | | | | | Wicked chip: No WRSR, no write enable command (but swallows our default one without a problem), supports an auto-erasing page write (but even without that page writes are recommended to write the whole page i.e. operate on a completely erased page), mad requirements on block refreshments if only partly written. Found on my Intel D946GZIS and tested with my serprog in situ. Using the page write by setting JEDEC_BYTE_PROGRAM to 0x11 and using the spi_chip_write_256 command greatly improves performance and works flawlessly. Corresponding to flashrom svn r1616. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Generify a25.c's SRWD printing function and move it to spi25.cStefan Tauner2012-09-221-0/+1
| | | | | | | Corresponding to flashrom svn r1602. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 14Stefan Tauner2012-09-211-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - ASUS M3A78-EH http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html - ASUS P2B-LS http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html - Biostar TA790GX A3+ http://paste.flashrom.org/view.php?id=1350 - ECS 848P-A7 http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html - GIGABYTE GA-G41MT-S2PT Reported on IRC - GIGABYTE GA-H77-D3H Reported and tested by Alexander Gordeev on IRC. - Gigabyte GA-X79-UD5 http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html - Shuttle FN78S http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - VIA EITX-3000 Reported on IRC by Tuju NOT OK: - Dell PowerEdge C6220 (0HYFFG) http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html - Foxconn Q45M http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html - MSI MS-7309 (K9N6SGM-V) http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html - Supermicro X9QRi-F+ http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - ZOTAC H61-ITX WiFi (H61ITX-A-E) http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html ASUS CUSL2-C has been tested to be working with the board enable once implemented for the TUSL2-C board. They seem to have the same PCI IDs as shown in the links below. Since only the CUSL2-C board enable has been tested yet, we distinguish the two by DMI strings. http://paste.flashrom.org/view.php?id=1393 http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml Tested flash chips: - Set EMST F25L008A to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - Set GigaDevice GD25Q64 to PREW (+PREW) http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea - Set Macronix MX25L12805 to P (+P) http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - Set SST SST49LF003A/B to PREW (+EW) http://paste.flashrom.org/view.php?id=467 - Set Winbond W49V002FA to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html Tested chipsets: - Intel X79 (0x1d41) http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html Board enables: - add ASUS P4P800-X Created by Idwer Vollering and tested by Mingsen Bao: http://paste.flashrom.org/view.php?id=467 - add DMI string to P4P800-VM Miscellaneous: - Add remaining Intel 7 series chipset (LPC) PCI IDs - Add generic SPI detection for chips from Winbond - Minor manpage changes - Minor other cleanups - Escape full stops after abbreviations in the manpage. - Add ICH9 and successors to spi_get_valid_read_addr Corresponding to flashrom svn r1601. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add spi_block_erase_62Stefan Tauner2012-09-211-0/+1
| | | | | | | | | | | | This is used by the AT25F series (only?), but is generic enough to reside in spi25.c. The only currently supported chip is the AT25F512B. Other members of that series need some additional infrastructure code, hence this patch adds the erase function to the AT25F512B only. Corresponding to flashrom svn r1600. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename AT25F512B-specific codeStefan Tauner2012-08-261-2/+2
| | | | | | | | | | | The AT25F512B is quite different from the other (older and yet unsupported) chips in the AT25F* familiy, hence rename 512B-specific stuff to make room for the generic AT25F* code. Corresponding to flashrom svn r1583. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Clean up a25.c, at25.c, spi25.cStefan Tauner2012-08-021-1/+1
| | | | | | | | | | | - introduce spi_prettyprint_status_register_atmel_at25_wpen() - use spi_prettyprint_status_register_bit() where possible - generify spi_prettyprint_status_register_bp3210 and use it in at25.c too Corresponding to flashrom svn r1560. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for for the Atmel AT49F040 chipDavid Borg2012-04-151-0/+1
| | | | | | | | | | Chip features an optional permanent boot block write protection. Corresponding to flashrom svn r1522. Signed-off-by: David Borg <borg.db@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for the Eon EN29LV640B chipRudolf Marek2012-04-141-0/+6
| | | | | | | | | | | | This chip needs special command sequences in 8 bit mode. Also, 8 bit programming needs actually 16bit double byte program. The chip is found on the Bifferos Bifferboard, for example. Corresponding to flashrom svn r1521. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for SFDP (JESD216)Stefan Tauner2012-02-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to modules using the opaque programmer framework (e.g. ICH Hardware Sequencing) this uses a template struct flashchip element in flashchips.c with a special probe function that fills the obtained values into that struct. This allows yet unknown SPI chips to be supported (read, erase, write) almost as if it was already added to flashchips.c. Documentation used: http://www.jedec.org/standards-documents/docs/jesd216 (2011-04) W25Q32BV data sheet Revision F (2011-04-01) EN25QH16 data sheet Revision F (2011-06-01) MX25L6436E data sheet Revision 1.8 (2011-12-26) Tested-by: David Hendricks <dhendrix@google.com> on W25Q64CV + dediprog Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog Thanks also to Michael Karcher for his comments and preliminary review! Corresponding to flashrom svn r1500. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-10/+10
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-84/+84
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-16/+16
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add opaque programmer registration infrastructureCarl-Daniel Hailfinger2011-11-041-0/+6
| | | | | | | | | | | | An opaque programmer does not allow direct flash access and only offers abstract probe/read/erase/write methods. Due to that, opaque programmers need their own infrastructure and registration framework. Corresponding to flashrom svn r1459. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-14/+14
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-14/+14
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the Sharp LH28F008BJT-BTLZ1 chipMattias Mattsson2011-08-251-0/+1
| | | | | | | | | | Tested by Mattias Mattsson <vitplister@gmail.com> on a PowerPC box. Corresponding to flashrom svn r1420. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove unneeded inclusions of chipdrivers.hStefan Tauner2011-08-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | This is related to the spi split patch as discussed in: http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364 the old commit (r914) log notes: "Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c" there still remain a few cases where chipdrivers.h is needed: dediprog.c (spi_read_chunked and spi_write_chunked) it87spi.c (due to spi_write_enable and spi_read_status_register) wbsio_spi.c (spi_programmer registration only) besides that, there are also non-spi files that do not need it. also, add flash.h to chipdrivers.h because it uses some types of it and remove flashchips.h from print.c Corresponding to flashrom svn r1414. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine status register and lock printing of Atmel and AMIC SPI chipsCarl-Daniel Hailfinger2011-05-191-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU, A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU, A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032 to a25.c. Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A, AT26DF321. Move Atmel AT25*/AT26* lock related functions originally added in r1115 from spi25.c to at25.c. For SPI chips the lock printing was handled by one common function, but sharing a common function which only is a big switch() statement doesn't make sense, especially if we can define lock printing functions per flash chip anyway. The printlock function pointer in struct flashchip is used to print status register and locking information, and serves as replacement for implicit status register and lock printing during probe. That code will later be changed to store locking info in a machine- accessible data structure so flashrom can handle locked regions correctly. Corresponding to flashrom svn r1316. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove erase_chip_stm50flw0x0xMichael Karcher2011-04-141-1/+0
| | | | | | | | | | | | | | | | As the comment indicates, that function is not a chip erase function at all, but a function calling a block eraser in a loop. So it adds no extra value to what we already have in the block_eraser infrastructure. Furthermore, that function assumes a uniform sector size layout, but is referenced from flash chip with non-uniform sector size layout, which is just wrong. Corresponding to flashrom svn r1287. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add W39L040Michael Karcher2011-03-061-0/+1
| | | | | | | Corresponding to flashrom svn r1268. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Enable unlocking (erasing/writing) W39V040FB chipsIdwer Vollering2010-12-261-0/+1
| | | | | | | | | | Add code for the unlocking (erasing/writing) of Winbond W39V040FB chips, enabling erasing/writing this type of chip. Corresponding to flashrom svn r1248. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add support for Winbond W39V040FB and W39V040FCCarl-Daniel Hailfinger2010-12-051-4/+10
| | | | | | | | | | | | | | | | | | | | Print lock status for all supported Winbond W39* chips: W39V040A, W39V040B, W39V040C, W39V040FA, W39V040FB, W39V040FC, W39V080A, W39V080FA, W39V080FA (dual mode). Fill in correct probe timing for Winbond W39V040C and W39V080FA. Please note that the W39V040B/W39V040FB pair has identical IDs, identical read/write/erase, but locking differs. Same applies to W39V040C/W39V040FC. This causes double detection on chipsets which support LPC and FWH, making flashing more difficult because the user has to select the correct chip. This is called the evil twin problem. A better evil twin handling (patch available) will resolve that problem. Corresponding to flashrom svn r1245. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>