aboutsummaryrefslogtreecommitdiffstats
path: root/dummyflasher.c
Commit message (Collapse)AuthorAgeFilesLines
...
* Add RES/REMS support to all dummyflasher emulated chips as a test caseCarl-Daniel Hailfinger2012-08-301-10/+47
| | | | | | | | | | Fix a few odd corner cases in RES/REMS support in dummyflasher emulation which became noticeable once RES/REMS was used heavily. Corresponding to flashrom svn r1589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+1
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dummyflasher.c: add support for SFDP by adding a new emulator chip: MX25L6436Stefan Tauner2012-05-071-11/+98
| | | | | | | | | | | The chip features a complete 1.0 SFDP JEDEC flash parameter table and also a vendor-specific extension table (defining voltages, lock bits etc). NB: the MX25L6436 uses the same RDID as the MX25L6405. Corresponding to flashrom svn r1534. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dummyflasher: Add a status register to SPI chipsStefan Tauner2012-05-061-10/+56
| | | | | | | Corresponding to flashrom svn r1532. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 10Paul Menzel2012-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ABIT A-S78H http://www.flashrom.org/pipermail/flashrom/2012-January/008603.html - ASRock AM2NF6G-VSTA http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html - ASUS KFSN4-DRE/SAS reported by ted on IRC - ASUS M2A-VM (HDMI variant) http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html - ASUS M4N78 PRO http://www.flashrom.org/pipermail/flashrom/2012-January/008598.html - ASUS P5K-V http://www.flashrom.org/pipermail/flashrom/2012-February/008737.html - ASUS P5KPL-CM http://www.flashrom.org/pipermail/flashrom/2012-January/008522.html - ASUS P5N7A-VM http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html - ASUS P5QPL-AM http://www.flashrom.org/pipermail/flashrom/2012-January/008557.html - ECS GF7100PVT-M3 http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html - ECS K7SEM http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html - ECS P4M800PRO-M V2.0 http://www.flashrom.org/pipermail/flashrom/2012-January/008478.html - Gigabyte 880GMA-USB3 http://www.flashrom.org/pipermail/flashrom/2012-February/008715.html - Gigabyte GA-EP31-DS3L http://www.flashrom.org/pipermail/flashrom/2012-January/008601.html - Gigabyte GA-X58A-UDR3 http://www.flashrom.org/pipermail/flashrom/2012-January/008572.html - Gigabyte GA-Z68XP-UD3 http://paste.flashrom.org/view.php?id=1058 - HP ProLiant N40L http://www.flashrom.org/pipermail/flashrom/2012-February/008650.html - MSI MS-7309 (K9N6PGM2-V2) http://www.flashrom.org/pipermail/flashrom/2011-December/008441.html - MSI MS-7548 (Aspen-GL8E used in HP Pavilion a6750f) http://www.flashrom.org/pipermail/flashrom/2012-February/008666.html - MSI MS-7676 (H67MA-ED55(B3)) http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html - PC Engines Alix.6f2 Reported by Philip Prindeville on IRC - Shuttle AV18E2 http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html - Supermicro X8DTE-F http://www.flashrom.org/pipermail/flashrom/2011-November/008304.html - Supermicro X8DTT-HIBQF http://www.flashrom.org/pipermail/flashrom/2012-January/008520.html NOT OK: - ASUS P8H61-M LE/USB3 http://www.flashrom.org/pipermail/flashrom/2012-January/008491.html - ASUS P8H67-M PRO http://www.flashrom.org/pipermail/flashrom/2011-December/008321.html - ASUS P8Z68-V PRO http://www.flashrom.org/pipermail/flashrom/2012-January/008469.html - Clevo P150HM (laptop) http://www.flashrom.org/pipermail/flashrom/2012-February/008717.html - Intel D425KT http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html - Supermicro X9SCA-F http://www.flashrom.org/pipermail/flashrom/2011-December/008313.html Tested flash chips: - mark AT29C512 as TEST_OK_PREW http://paste.flashrom.org/view.php?id=977 - mark M25P40 as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-December/008351.html - mark M25PE80 as TEST_OK_PREW http://paste.flashrom.org/view.php?id=1061 - mark MX25L6405 as TEST_OK_PREW tested myself with an MX25L6436E variant on serprog - mark W39V080A as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html Tested chipsets: - SiS 730 (:0730) http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html - NVIDIA MCP61 (:03e0) http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html - NVIDIA MCP73 (:07d7) http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html - NVIDIA MCP79 (:0aac) http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html - VIA VT82C69x (0691) and VT82C686A/B (:0686) http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html - AMD's SB950 (and presumably also SB920) have the same PCI ID as previous generations, hence change the chipset enable device string. Thanks to Christian Ruppert for the suggestion. - Fix the board enable of the abit NF-M2 nView which had the IDs of its onboard graphics card in its pattern. Change this to the LPC controller. - Intel X79 SPI registers are identical to 6 Series', so use the chipsetenable wrapper of it (enable_flash_pch6). - Fix two paranoid checks for address < 0 in ichspi.c which became futile (and generate clang warnings) with the unsignify patch committed in r1470. - Rename AT25DF641 to AT25DF641(A). They are almost idencical, but could be distinguished by an extended RDID probe (Atmel's patented EDI procedure), which we do not support yet, hence handle them as one model for now. - Source format fixes and typos Corresponding to flashrom svn r1499. the addition of the ASRock AM2NF6G-VSTA to print.c is Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> everything else is Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Workaround missing %hhx support in MinGW sscanfCarl-Daniel Hailfinger2012-02-161-2/+12
| | | | | | | | | | MinGW uses standard Windows C libraries and those apparently don't support %hhx for sscanf into a uint8_t. SCNx8 isn't available either. Corresponding to flashrom svn r1495. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* SPI command black-/ignorelisting for the flash chip emulator in the dummy ↵Carl-Daniel Hailfinger2012-02-081-3/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | programmer Usage: flashrom -p dummy:spi_blacklist=commandlist flashrom -p dummy:spi_ignorelist=commandlist If commandlist is 0302, flashrom will refuse (blacklist) or ignore (ignorelist) command 0x03 (READ) and command 0x02 (WRITE). The commandlist can be up to 512 bytes (256 commands) long. Specifying flash chip emulation is a good idea to get useful results. Very useful for testing corner cases if you don't own a locked down Intel chipset and want to simulate such a thing. Example usage: dd if=/dev/zeros bs=1024k count=4 of=dummy_simulator.rom dd if=/dev/urandom bs=1024k count=4 of=randomimage.rom flashrom -p dummy:emulate=SST25VF032B,image=dummy_simulator.rom,\ spi_blacklist=20,spi_ignorelist=52 -w randomimage.rom -V Corresponding to flashrom svn r1490. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-14/+44
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-13/+13
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Register Parallel/LPC/FWH programmers the same way SPI programmers are ↵Carl-Daniel Hailfinger2011-11-091-6/+27
| | | | | | | | | | | | | | | | | | | | registered All programmers are now calling programmer registration functions and direct manipulations of buses_supported are not needed/possible anymore. Note: Programmers without parallel/LPC/FWH chip support should not call register_par_programmer(). Additional fixes: Set max_rom_decode.parallel for drkaiser. Remove abuse of programmer_map_flash_region in it85spi. Annotate several FIXMEs in it85spi. Corresponding to flashrom svn r1463. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-2/+2
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-11/+12
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Rename CHIP_BUSTYPE_FOO to BUS_FOOCarl-Daniel Hailfinger2011-07-271-5/+5
| | | | | | | | | It's shorter to type, and we have less problems with the 80 column limit. Corresponding to flashrom svn r1396. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-15/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Kill central list of SPI programmersMichael Karcher2011-05-111-4/+16
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-6/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Improve debugging for unaligned erase in the flash chip emulatorCarl-Daniel Hailfinger2011-02-041-12/+6
| | | | | | | | | Fix out-of-bounds access for chip erase in the flash chip emulator. Corresponding to flashrom svn r1259. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Support setting the Dediprog SF100 SPI voltageCarl-Daniel Hailfinger2010-11-091-7/+0
| | | | | | | | | | | Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Corresponding to flashrom svn r1226. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Add SPI flash emulation capability to the dummy programmerCarl-Daniel Hailfinger2010-11-011-11/+367
| | | | | | | | | | | | | | | | | | | | | | | | | | You have to choose between - no emulation - ST M25P10.RES SPI flash chip (RES, page write) - SST SST25VF040.REMS SPI flash chip (REMS, byte write) - SST SST25VF032B SPI flash chip (RDID, AAI write) Example usage: flashrom -p dummy:emulate=SST25VF032B Flash image persistence is available as well. Example usage: flashrom -p dummy:image=dummy_simulator.rom Allow setting the max chunksize for page write with the dummy programmer. Example usage: flashrom -p dummy:spi_write_256_chunksize=5 Flash emulation is compiled in by default. This code helped me find and fix various bugs in the SPI write code as well as in the testsuite. Corresponding to flashrom svn r1220. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use generic unlocking infrastructure for SPI chipsCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-0/+9
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-1/+1
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-16/+18
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add SPI chip read support to the dummy flasherCarl-Daniel Hailfinger2010-06-201-0/+8
| | | | | | | | | This allows using the dummy flasher for SPI read debugging. Corresponding to flashrom svn r1053. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* More NetBSD fixes (w/ patch)Jonathan A. Kollasch2010-02-161-1/+2
| | | | | | | | | | | | | Cast input to tolower() to unsigned char to work around how tolower() is implemented on NetBSD. Also, use CPPFLAGS (rather than overriding CFLAGS) for the NetBSD/DragonFly build example. Corresponding to flashrom svn r905. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert dummyflasher to msg_* and make good use of msg_pspewCarl-Daniel Hailfinger2010-01-091-29/+29
| | | | | | | | | | | | | | | Rule of thumb: Diagnostic programmer init messages are msg_pdbg, all other debug stuff (except warnings, which should be pmsg_pinfo or msg_perr) is msg_pspew. This makes "flashrom -p dummy -V" output a whole lot more readable (try it!). In case someone wants the full barfed output, it is possible to specify -VV instead of -V. Corresponding to flashrom svn r842. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use a common parameter variable for all programmersCarl-Daniel Hailfinger2009-08-121-14/+12
| | | | | | | | | | This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Corresponding to flashrom svn r679. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Remove unnecessary #include filesCarl-Daniel Hailfinger2009-08-091-3/+0
| | | | | | | | | | Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Corresponding to flashrom svn r671. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add SPI multicommand infrastructureCarl-Daniel Hailfinger2009-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI opcodes need to be sent in direct succession after each other without any chip deselect happening in between. A prominent example is WREN (Write Enable) directly before PP (Page Program). Intel calls the first opcode in such a row "preopcode". Right now, we ignore the direct succession requirement completely and it works pretty well because most onboard SPI masters have a timing or heuristics which make the problem disappear. The FT2232 SPI flasher is different. Since it is an external flasher, timing is very different to what we can expect from onboard flashers and this leads to failure at slow speeds. This patch allows any function to submit multiple SPI commands in a stream to any flasher. Support in the individual flashers isn't implemented yet, so there is one generic function which passes the each command in the stream one-by-one to the command functions of the selected SPI flash driver. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Sometimes we want to read/write more than 4 bytes of chip content at onceCarl-Daniel Hailfinger2009-06-051-0/+20
| | | | | | | | | | | | | | | | | | | | Add chip_{read,write}n to the external flasher infrastructure which read/write n bytes at once. Fix a few places where the code used memcpy/memcmp although that is strictly impossible with external flashers. Place a FIXME in the layout.c code because usage is not totally clear and needs to be fixed to support external flashers. As a nice side benefit, we get a noticeable speedup for builtin flash reading which is now a memcpy() of the full flash area instead of a series of single-byte reads. Corresponding to flashrom svn r579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix a bug in dummyflasher.c special case where no type parameter is givenCarl-Daniel Hailfinger2009-06-051-1/+1
| | | | | | | Corresponding to flashrom svn r577. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mark 3COM "3C905B: Cyclone 10/100/BNC" as fully testedUwe Hermann2009-06-021-1/+1
| | | | | | | | | Also do some random cleanups while I'm at it. Corresponding to flashrom svn r567. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add bus type support to the dummy external programmerCarl-Daniel Hailfinger2009-06-011-1/+37
| | | | | | | | | | | | | | | The syntax is explained in the man page. Example: flashrom -p dummy=lpc,fwh Tested, works perfectly. ;-) As a nice benefit, it allows easy testing of the "probe only compatible flashes" patch. Corresponding to flashrom svn r559. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-1/+1
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-2/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Introduce a type "chipaddr" to abstract the offsets within flash regionsCarl-Daniel Hailfinger2009-05-161-12/+12
| | | | | | | | | | | | | | | | | | | Use chipaddr instead of volatile uint8_t * because when we access chips in external flashers, they are not accessed via pointers at all. Benefits: This allows us to differentiate between volatile machine memory accesses and flash chip accesses. It also enforces usage of chip_{read,write}[bwl] to access flash chips, so nobody will unintentionally use pointers to access chips anymore. Some unneeded casts are removed as well. Grepping for chip operations and machine memory operations doesn't yield any false positives anymore. Compile tested on 32 bit and 64 bit Linux. Corresponding to flashrom svn r519. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a dummy SPI controller driver, similar to the dummy LPC/FWH/Parallel ↵Carl-Daniel Hailfinger2009-05-141-0/+21
| | | | | | | | | | | | | | | | | flasher driver Does not support reading or writing the fake chip yet. flashrom --programmer dummy also enables the dummy SPI controller driver. Testing the dummy SPI driver revealed a RDID debug printing bug in the SPI core. Fix that as well. Corresponding to flashrom svn r507. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Print dummy programmer messages only if verbose mode is selectedCarl-Daniel Hailfinger2009-05-111-10/+10
| | | | | | | | | | | | Print the return value of dummy_chip_read[bwl]. Align entries in programmer_table. This is a cosmetic patch and has no effect on code flow. Corresponding to flashrom svn r495. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Abstract mapping/unmapping of flash regionsCarl-Daniel Hailfinger2009-05-111-0/+13
| | | | | | | | | | | | | | | | Flash mapping/unmapping was performed without an abstraction layer, so even the dummy flasher caused memory mappings to be set up. Add map/unmap functions to the external flasher abstraction. Fix a possible scribble-over-low-memory corner case which fortunately never triggered so far. With this patch, --programmer dummy works fine as non-root. Corresponding to flashrom svn r493. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a dummy external flasher which just prints each operationCarl-Daniel Hailfinger2009-05-091-0/+75
Usage: flashrom --programmer dummy This is a great way to test flashrom without root access. Corresponding to flashrom svn r483. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>