aboutsummaryrefslogtreecommitdiffstats
path: root/it87spi.c
Commit message (Collapse)AuthorAgeFilesLines
* Convert all messages in it87spi.c to the new message infrastructureSean Nelson2010-01-101-16/+16
| | | | | | | | | Change one msg_pdbg to msg_pinfo, change 7 msg_pinfo to msg_pdbg. Corresponding to flashrom svn r855. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* SuperI/O detection now happens unconditionally and before the chipset enableCarl-Daniel Hailfinger2009-12-221-11/+53
| | | | | | | | | | | | | | | | | We could run it after chipset enable, but it definitely has to happen before board enable because the board enable usually accesses the SuperI/O. With this patch, it is possible to add a struct superio to the board enable table for more accurate matching in case subsystem IDs are ambiguous. This patch focuses on the generic infrastructure aspect and on support for IT8712F/IT8716F. Thanks go to Adrian Glaubitz and Ward Vandewege for testing. Corresponding to flashrom svn r813. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* Store block sizes and corresponding erase functions in struct flashchipCarl-Daniel Hailfinger2009-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I decided to fill in the info for a few chips to illustrate how this works both for uniform and non-uniform sector sizes. struct eraseblock{ int size; /* Eraseblock size */ int count; /* Number of contiguous blocks with that size */ }; struct eraseblock doesn't correspond with a single erase block, but with a group of contiguous erase blocks having the same size. Given a (top boot block) flash chip with the following weird, but real-life structure: top 16384 8192 8192 32768 65536 65536 65536 65536 65536 65536 65536 bottom we get the following encoding: {65536,7},{32768,1},{8192,2},{16384,1} Although the number of blocks is bigger than 4, the number of block groups is only 4. If you ever add some flash chips with more than 4 contiguous block groups, the definition will not fit into the 4-member array anymore and gcc will recognize that and error out. No undetected overflow possible. In that case, you simply increase array size a bit. For modern flash chips with uniform erase block size, you only need one array member anyway. Of course data types will need to be changed if you ever get flash chips with more than 2^30 erase blocks, but even with the lowest known erase granularity of 256 bytes, these flash chips will have to have a size of a quarter Terabyte. I'm pretty confident we won't see such big EEPROMs in the near future (or at least not attached in a way that makes flashrom usable). For SPI chips, we even have a guaranteed safety factor of 4096 over the maximum SPI chip size (which is 2^24). And if such a big flash chip has uniform erase block size, you could even split it among the 4 array members. If you change int count to unsigned int count, the storable size doubles. So with a split and a slight change of data type, the maximum ROM chip size is 2 Terabytes. Since many chips have multiple block erase functions where the eraseblock layout depends on the block erase function, this patch couples the block erase functions with their eraseblock layouts. struct block_eraser { struct eraseblock{ unsigned int size; /* Eraseblock size */ unsigned int count; /* Number of contiguous blocks with that size */ } eraseblocks[NUM_ERASEREGIONS]; int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); } block_erasers[NUM_ERASEFUNCTIONS]; Corresponding to flashrom svn r719. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Standardize on using __func__ instead of __FUNCTION__Uwe Hermann2009-09-021-2/+2
| | | | | | | | | | | | | | | The __func__ variant is standardized in C99 and recommended to be used instead of __FUNCTION__ in the gcc info page. Only _very_ old versions of gcc did not know about __func__, but we've been using both __func__ and __FUNCTION__ for a long while now, and nobody complained about this, so all our users seem to use recent enough compilers. Corresponding to flashrom svn r711. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Use a common parameter variable for all programmersCarl-Daniel Hailfinger2009-08-121-5/+4
| | | | | | | | | | This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Corresponding to flashrom svn r679. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Replace remaining explicit erases in SPI programmer drivers with auto-erasesCarl-Daniel Hailfinger2009-08-101-27/+9
| | | | | | | | | | | | | Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well. Corresponding to flashrom svn r673. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carlos Arnau Perez <cemede@gmail.com>
* Use a distinct return code for SPI commands with unsupported/invalid lengthCarl-Daniel Hailfinger2009-07-141-2/+2
| | | | | | | | | | | Some drivers support only a few combinations of read/write length and return error otherwise. Having a distinct return code for this error means we can handle it in upper layers. Corresponding to flashrom svn r653. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Convert SPI byte program to use the multicommand infrastructureCarl-Daniel Hailfinger2009-07-121-4/+2
| | | | | | | | | | Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r651. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested it on Epia-m700 worked okay. Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Add an optional flash port parameter for IT87* SPI controllers in standalone ↵Carl-Daniel Hailfinger2009-07-111-5/+22
| | | | | | | | | | | | | programmer mode If the parameter is set, the IT87* SPI driver will set the I/O base port of the IT87* SPI controller interface to the port specified in the parameter. Usage: flashrom -p it87spi=port=0x820 Corresponding to flashrom svn r646. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add SPI multicommand infrastructureCarl-Daniel Hailfinger2009-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI opcodes need to be sent in direct succession after each other without any chip deselect happening in between. A prominent example is WREN (Write Enable) directly before PP (Page Program). Intel calls the first opcode in such a row "preopcode". Right now, we ignore the direct succession requirement completely and it works pretty well because most onboard SPI masters have a timing or heuristics which make the problem disappear. The FT2232 SPI flasher is different. Since it is an external flasher, timing is very different to what we can expect from onboard flashers and this leads to failure at slow speeds. This patch allows any function to submit multiple SPI commands in a stream to any flasher. Support in the individual flashers isn't implemented yet, so there is one generic function which passes the each command in the stream one-by-one to the command functions of the selected SPI flash driver. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Handle programmer init errors and abortCarl-Daniel Hailfinger2009-06-281-2/+6
| | | | | | | | | | | | | | If the programmer didn't initialize correctly, it is pointless to continue. Fix standalone IT87* SPI init to set flashbus to NONE if no IT87* SPI communication is possible. Print the I/O port detected by the IT87* SPI code. Corresponding to flashrom svn r633. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org>
* Support reads of arbitrary rangeCarl-Daniel Hailfinger2009-06-161-3/+3
| | | | | | | | | | | | That means you can tell flashrom to read exactly bytes 12345-56789 (start 12345, length 44445) and it will not fetch a single byte more. Uwe tested this on one LPC, one SPI, and one parallel flash board. Corresponding to flashrom svn r596. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Every SPI host controller implemented its own way to read flash chipsCarl-Daniel Hailfinger2009-06-131-8/+2
| | | | | | | | | | | | | | | | | | | | | | This was partly due to a design problem in the abstraction layer. There should be exactly two different functions for reading SPI chips: - memory mapped reads - SPI command reads. Each of them should be contained in a separate function, optionally taking parameters where needed. This patch solves the problems mentioned above, shortens the code and makes the code logic a lot more obvious. Since open-coding the min() function leads to errors, include it in this patch as well. Corresponding to flashrom svn r589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Add programmer-specific delay functionsCarl-Daniel Hailfinger2009-06-051-2/+2
| | | | | | | | | | | Add external programmer delay functions so external programmers can handle the delay on their own if needed. Corresponding to flashrom svn r578. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Only probe for chips with compatible bus protocolsCarl-Daniel Hailfinger2009-06-011-3/+12
| | | | | | | | | | | | | | | | | | It doesn't make sense to probe for SPI chips on a LPC host, nor does it make sense to probe for LPC chips on a Parallel host. This change is backwards compatible, but adding host protocol info to chipset init functions will speed up probing. Once all chipset init functions are updated and the Winbond W29EE011 and AMIC A49LF040A chip definitions are updated, the W29EE011 workaround can be deleted as the W29/A49 conflict magically disappears. Corresponding to flashrom svn r560. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested on real hardware and Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add IT87xx SPI as external flasher optionCarl-Daniel Hailfinger2009-05-311-3/+16
| | | | | | | | | | This is a fast way to test if a IT87xx board_enable() would work. Corresponding to flashrom svn r557. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Harald Gutmann <harald.gutmann@gmx.net>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-1/+1
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refactor SuperIO accessesCarl-Daniel Hailfinger2009-05-251-23/+10
| | | | | | | | | | | | | | | We had duplicated code under different names and even open-coded some functions in some places. wbsio_read/regval -> sio_read wbsio_write/regwrite -> sio_write wbsio_mask -> sio_mask board_biostar_p4m80_m4 now uses existing IT87 functions. Corresponding to flashrom svn r547. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-3/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Chips like the SST SST25VF080B can only handle single byte writes outside ↵Carl-Daniel Hailfinger2009-05-091-4/+10
| | | | | | | | | | | | | | | | | | AAI mode Change SPI architecture to handle 1-byte chunk chip writing differently from 256-byte chunk chip writing. Annotate SPI chip write functions with _256 or _1 suffix denoting the number of bytes they write at maximum. The 1-byte chunk writing is cut-n-pasted to different SPI drivers right now. A later patch can move them to the generic spi_chip_write_1. Corresponding to flashrom svn r485. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine handling of spi_write_enable() failures to fix chip erases on ichspiCarl-Daniel Hailfinger2009-05-091-3/+10
| | | | | | | | | | | | | | | Until the ICH SPI driver can handle preopcodes as standalone opcodes, we should handle such special opcode failure gracefully on ICH and compatible chipsets. This fixes chip erase on almost all ICH+VIA SPI masters. Thanks to Ali Nadalizadeh for helping track down this bug! Corresponding to flashrom svn r484. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* IT8718F works just like IT8716FPeter Stuge2009-01-121-1/+1
| | | | | | | Corresponding to flashrom svn r379 and coreboot v2 svn r3858. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Yul Rottmann <yulrottmann@bitel.net>
* Coding-style fixes for flashrom, partly indent-aidedUwe Hermann2008-10-181-25/+36
| | | | | | | Corresponding to flashrom svn r326 and coreboot v2 svn r3669. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Trivial SPI cleanupsPeter Stuge2008-07-071-2/+2
| | | | | | | | | | | | | | | | | While writing a new SPI driver I fixed some things in the SPI code: All calls to spi_command() had unneccessary #define duplications, and in some cases the read count define could theoretically become harmful because NULL was passed for the read buffer. Avoid a crash, should someone change the #defines. I also noticed that the only caller of spi_page_program() was the it87 driver, and spi_page_program() could only call back into the it87 driver. Removed the function for easier-to-follow code and made it8716f_spi_page_program() static. The ichspi driver's static page functions are already static. Corresponding to flashrom svn r302 and coreboot v2 svn r3418. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* First attempt to clean up SPI probing and create a common construct: the ↵Stefan Reinauer2008-06-301-0/+6
| | | | | | | | | | | | | | | | | | flash bus At some point the flash bus will be part of struct flashchip. Pardon me for pushing this in, but I think it is important to beware of further decay and it will improve things for other developers in the short run. Carl-Daniel, I will consider your suggestions in another patch. I want to keep things from getting too much for now. The patch includes Rudolf's VIA SPI changes though. Corresponding to flashrom svn r285 and coreboot v2 svn r3401. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Changes to make flashrom compile (and work) on FreeBSDAndriy Gapon2008-05-221-29/+29
| | | | | | | | | | | | This patch addresses different argument order of outX() calls, FreeBSD-specific headers, difference in certain type names and system interface names, and also FreeBSD-specific way of gaining IO port access. Corresponding to flashrom svn r245 and coreboot v2 svn r3344. Signed-off-by: Andriy Gapon <avg@icyb.net.ua> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* IT8716F: Enable writes if decoding of any SPI addresses is enabledCarl-Daniel Hailfinger2008-05-161-0/+6
| | | | | | | Corresponding to flashrom svn r238 and coreboot v2 svn r3324. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* Move all IT87xx specific SPI routines from spi.c to a separate file it87spi.cCarl-Daniel Hailfinger2008-05-131-0/+257
No behavioural changes, but greatly improved SPI abstraction. Corresponding to flashrom svn r229 and coreboot v2 svn r3305. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 10:01:24 +0000