aboutsummaryrefslogtreecommitdiffstats
path: root/m29f400bt.c
Commit message (Collapse)AuthorAgeFilesLines
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-31/+34
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-5/+5
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-1/+1
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-1/+1
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move erase verification to generic codeCarl-Daniel Hailfinger2011-06-261-8/+2
| | | | | | | | | | | | Erase functions are no longer called from chip drivers and thus their internal erase verification can be moved to generic code. This also makes it easier to skip the verify step if desired and to differentiate between failed command submission and failed erase verification. Corresponding to flashrom svn r1353. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Switch all flash chips to partial writeCarl-Daniel Hailfinger2010-10-131-7/+2
| | | | | | | | | | | | | | | The inner write functions which handle partial write are renamed to the original name of their wrappers. The write wrappers are removed. Corresponding to flashrom svn r1211. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Andrew Morgan <ziltro@ziltro.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Refactor remaining write wrappersCarl-Daniel Hailfinger2010-10-131-0/+1
| | | | | | | | | | | | | | | | | | | Kill duplicated code. Annotate write functions with their chunk size. Mark Fujitsu MBM29F400BC and ST M29F400BB as untested because their write code no longer uses a broken layout. Corresponding to flashrom svn r1210. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Simplify calls to inner write functionsCarl-Daniel Hailfinger2010-10-101-14/+1
| | | | | | | | | No behavioural changes, just equivalence transformations. Corresponding to flashrom svn r1209. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Unify chip write functionsCarl-Daniel Hailfinger2010-10-101-13/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The currently used write functions (wrappers) all use helpers which perform the actual write (inner functions). The signature of the write wrappers is: int write_chip(struct flashchip *flash, uint8_t * buf); The signature of the inner write functions varied a lot. This patch changes them to: int write_part(struct flashchip *flash, uint8_t *src, int start, int len); Did you know that flashrom has only 8 inner write functions for all flash chips? write_page_write_jedec_common write_sector_jedec_common write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new spi_aai_write_new write_page_82802ab write_page_m29f400bt Export all inner write functions. Change the function signature of wait_82802ab to eliminate single-use variables. Remove an error message in write_page_m29f400bt which was printed for every byte written regardless of success. Add sharplhf00l04.c to the list of flash chip drivers in the Makefile. While the functions in there are unused, I suspect we will need them later, and by hooking the file up we ensure that compilation won't break. Corresponding to flashrom svn r1208. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove progress printing from individual flash chip driversCarl-Daniel Hailfinger2010-10-081-28/+0
| | | | | | | | | | Progress printing should be handled in the generic code, and will end up there once partial write is possible. Corresponding to flashrom svn r1207. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move implicit erase out of chip driversCarl-Daniel Hailfinger2010-10-081-21/+0
| | | | | | | | | | | | | | | | | | Flashrom had an implicit erase-on-write for most flash chip and programmer drivers, but it was not entirely consistent. Some drivers had their own hand-rolled partial update functionality which made handling partial updates from generic code impossible. Move implicit erase out of chip drivers, and kill some dead erase functions at the same time. A full chip erase is now performed in the generic code for all flash chips on write, and after that the whole chip is written. Corresponding to flashrom svn r1206. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mark Fujitsu MBM29F400BC write as broken (implicit eraseblock layout in write)Carl-Daniel Hailfinger2010-07-161-53/+0
| | | | | | | | | | Use full-chip write function on Fujitsu MBM29F400TC and ST M29F400BT. Add support for ST M29F400BB. Corresponding to flashrom svn r1083. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert chips' message printing to msg_c* Fixed suggestions by Carl-DanielSean Nelson2010-03-241-30/+29
| | | | | | | Corresponding to flashrom svn r982. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Convert the following chips to use struct eraseblockSean Nelson2009-12-231-1/+11
| | | | | | | | | | | | | | | | | | | | | | | AMIC_A29002B AMIC_A29002T EN_29F002B EN_29F002T MBM29F004BC MBM29F004TC MBM29F400BC MBM29F400TC MX_25L3205 MX_25L6405 MX_29F002B MX_29F002T Add block erasers for m29f400bt and mx29f002. Change programmer delays from 2 seconds to 10us in mx29f002 and am29f040b. Corresponding to flashrom svn r819. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use common jedec functionality where appropriateMichael Karcher2009-11-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The deleted function in en29f002a.c is reintroduced as write_by_byte_jedec in jedec.c as it contains no chip-specific instructions. It is not yet used in other chip drivers, as key addresses (0x2AAA/0x5555) are often specified with less bits. After crosschecking datasheets, most of the fixmes can probably be resolved as indicated in them, causing significant code reduction. The common JEDEC code for bytewise programming does not program 0xFF at all. The chips that had a dedicated bytewise flash function which has been changed to write_jedec_1 thus changed flashing behaviour and the "write" test flag has been removed. This applies to: AMD Am29F002BB/Am29F002NBB AMD Am29F002BT/Am29F002NBT (TEST_OK_PREW before) AMIC A29002B AMIC A29002T (TEST_OK_PREW before) EON EN29F002(A)(N)B EON EN29F002(A)(N)T (TEST_OK_PREW before) Macronix MX29F001B (TEST_OK_PREW before) Macronix MX29F001T (TEST_OK_PREW before) Macronix MX29F002B Macronix MX29F002T (TEST_OK_PREW before) Macronix MX29LV040 Similar analysis should be performed for the read id stuff. Corresponding to flashrom svn r785. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine support for the JEDEC Software Data ProtectionMichael Karcher2009-11-261-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the extremely dangerous unprotect_jedec function which is not used at all within flashrom code, and renames the misleadingly named protect_jedec function to start_program_jedec. Calls to protect_jedec after flashing are removed, because a) on LPC chips, the command sent by protoct_jedec is not even in the datasheet and b) on parallel chips, the block write command issued before already contained the software protection sequence, so software protection is definitely enabled. This patch also removes two clones of protect_jedec Background: JEDEC Software Data Protection started as an optional feature, which was disabled on the first single-voltage-flash chips. The software data protection is the need to prefix a write with a magic "write enable" command, while without write protection every write access into the chip's address space modifies flash content. This magic write enable command also tells the flash chip that the programmer obviously support sending write-enable commands and turns off the "any write modifies flash content" mode. There also exist a two-command (6 writes) sequence that disables Software Data Protection completey, which should only ever be used to prepare updating with a device that can't handle software data protection. Corresponding to flashrom svn r783. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Standardize on using __func__ instead of __FUNCTION__Uwe Hermann2009-09-021-1/+1
| | | | | | | | | | | | | | | The __func__ variant is standardized in C99 and recommended to be used instead of __FUNCTION__ in the gcc info page. Only _very_ old versions of gcc did not know about __func__, but we've been using both __func__ and __FUNCTION__ for a long while now, and nobody complained about this, so all our users seem to use recent enough compilers. Corresponding to flashrom svn r711. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Flashrom only checks for very few chips if the erase workedCarl-Daniel Hailfinger2009-06-151-10/+47
| | | | | | | | | | | | | | | | | | | And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Corresponding to flashrom svn r595. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add programmer-specific delay functionsCarl-Daniel Hailfinger2009-06-051-6/+6
| | | | | | | | | | | Add external programmer delay functions so external programmers can handle the delay on their own if needed. Corresponding to flashrom svn r578. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Introduce a type "chipaddr" to abstract the offsets within flash regionsCarl-Daniel Hailfinger2009-05-161-12/+12
| | | | | | | | | | | | | | | | | | | Use chipaddr instead of volatile uint8_t * because when we access chips in external flashers, they are not accessed via pointers at all. Benefits: This allows us to differentiate between volatile machine memory accesses and flash chip accesses. It also enforces usage of chip_{read,write}[bwl] to access flash chips, so nobody will unintentionally use pointers to access chips anymore. Some unneeded casts are removed as well. Grepping for chip operations and machine memory operations doesn't yield any false positives anymore. Compile tested on 32 bit and 64 bit Linux. Corresponding to flashrom svn r519. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* FreeBSD definitions of (read|write)[bwl] collide with our ownCarl-Daniel Hailfinger2009-03-061-28/+28
| | | | | | | | | | | | Before we attempt trickery, we can simply rename the accessor functions. Patch created with the help of Coccinelle. Corresponding to flashrom svn r420 and coreboot v2 svn r3984. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <idwer_v@hotmail.com> Acked-by: Patrick Georgi <patrick@georgi-clan.de>
* Use helper functions to access flash chipsCarl-Daniel Hailfinger2009-03-051-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now we perform direct pointer manipulation without any abstraction to read from and write to memory mapped flash chips. That makes it impossible to drive any flasher which does not mmap the whole chip. Using helper functions readb() and writeb() allows a driver for external flash programmers like Paraflasher to replace readb and writeb with calls to its own chip access routines. This patch has the additional advantage of removing lots of unnecessary casts to volatile uint8_t * and now-superfluous parentheses which caused poor readability. I used the semantic patcher Coccinelle to create this patch. The semantic patch follows: @@ expression a; typedef uint8_t; volatile uint8_t *b; @@ - *(b) = (a); + writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + readb(b) @@ type T; T b; @@ ( readb | writeb ) (..., - (T) - (b) + b ) In contrast to a sed script, the semantic patch performs type checking before converting anything. Tested-by: Joe Julian Corresponding to flashrom svn r418 and coreboot v2 svn r3971. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
* Beautify flash chip ID verbose printout a little, always use %02xPeter Stuge2009-01-251-1/+1
| | | | | | | Corresponding to flashrom svn r390 and coreboot v2 svn r3895. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Rename LinuxBIOS to corebootStefan Reinauer2008-01-181-1/+1
| | | | | | | Corresponding to flashrom svn r178 and coreboot v2 svn r3054. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Refine various vendor ID annotationsCarl-Daniel Hailfinger2007-12-311-0/+3
| | | | | | | | | | | | | | This fixes a few vendor IDs to conform with JEDEC publication 106W (JEP106W), adds some device IDs and provides information about non-conforming IDs. The EON change is left to the patch adding EON chips. This patch should have no effect on code generation. Corresponding to flashrom svn r170 and coreboot v2 svn r3029. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Corey Osgood <corey.osgood@gmail.com>
* Some cosmetic cleanups in the flashrom code and outputUwe Hermann2007-10-171-2/+2
| | | | | | | Corresponding to flashrom svn r151 and coreboot v2 svn r2873. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add '(C)' where it's missing (for consistency reasons)Uwe Hermann2007-09-091-1/+1
| | | | | | | Corresponding to flashrom svn r136 and coreboot v2 svn r2768. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Change all flashrom license headers to use our standard formatUwe Hermann2007-08-291-17/+12
| | | | | | | | | No changes in content of the files. Corresponding to flashrom svn r131 and coreboot v2 svn r2751. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Cosmetic fixesUwe Hermann2007-08-231-4/+4
| | | | | | | Corresponding to flashrom svn r130 and coreboot v2 svn r2748. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Drop duplicated code (copies of plain JEDEC functions)Uwe Hermann2007-08-231-34/+3
| | | | | | | Corresponding to flashrom svn r129 and coreboot v2 svn r2747. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Drop a bunch of useless header files, merge them into flash.hUwe Hermann2007-08-231-2/+0
| | | | | | | Corresponding to flashrom svn r128 and coreboot v2 svn r2746. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Move code into *.c files, there's no reason to have it in header filesUwe Hermann2007-08-231-0/+63
| | | | | | | Corresponding to flashrom svn r127 and coreboot v2 svn r2745. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Big cosmetic offensive on flashromStefan Reinauer2007-05-231-4/+4
| | | | | | | | | | | | * Give decent names to virt_addr and virt_addr_2 * add some comments * move virtual addresses to the end of the struct, so they dont mess up the initializer. Corresponding to flashrom svn r111 and coreboot v2 svn r2689. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Fix coding style of flashrom by running indent on all filesUwe Hermann2007-05-091-40/+30
| | | | | | | | | | | | indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs *.[ch] Some minor fixups were required, and maybe a few more cosmetic changes are needed. Corresponding to flashrom svn r108 and coreboot v2 svn r2643. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Removing $Id$ tags as they have no meaning in SVNStefan Reinauer2006-08-231-1/+0
| | | | Corresponding to flashrom svn r60 and coreboot v2 svn r2386.
* Flashrom update from Stefan, resolve issue 21Ollie Lho2005-11-261-29/+30
| | | | Corresponding to flashrom svn r34 and coreboot v2 svn r2111.
* Consolidate more jedec standard codeOllie Lho2004-03-201-56/+66
| | | | Corresponding to flashrom svn r15 and coreboot v2 svn r1457.
* Changes from NIKIRonald G. Minnich2003-09-121-3/+10
| | | | Corresponding to coreboot v1 svn r873.
* Made the ids always print in hex less verbose verify stepRonald G. Minnich2003-02-281-2/+4
| | | | Corresponding to coreboot v1 svn r752.
* Add support for ST M29F400BT - part 2Ronald G. Minnich2002-06-111-0/+180
Corresponding to coreboot v1 svn r589.