aboutsummaryrefslogtreecommitdiffstats
path: root/pcidev.c
Commit message (Collapse)AuthorAgeFilesLines
* pcidev.c: populate IDs with pci_fill_info()Daniel Verkamp2020-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With pciutils 3.7.0, flashrom is unable to match any PCI devices by vendor/device ID because the vendor_id and device_id fields of struct pci_dev are not filled in. Call pci_fill_info() to request these identifiers before trying to match them against the supported device list. The pciutils ChangeLog for 3.7.0 mentions that the documentation and back-end behavior for pci_fill_info() was updated; it seems that a call to pci_fill_info() was always intended to be required, but some backends (such as the sysfs one used on Linux) would fill the identifier fields even when not requested by the user. The pci_fill_info() function and the PCI_FILL_IDENT flag have been available for all versions of pciutils since at least 2.0 from 1999, so it should be safe to add without any version checks. With this change, reading/writing a nicintel_spi boot ROM is successful. Signed-off-by: Daniel Verkamp <dverkamp@chromium.org> Change-Id: Ia011d4d801f8a54160e45a70b14b740e6dcc00ef Reviewed-on: https://review.coreboot.org/c/flashrom/+/46310 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* pcidev.c: Drop unused variableElyes HAOUAS2020-04-241-2/+1
| | | | | | | | | | Change-Id: I6eea3e34ed6fc5d3fe65d5cf7e7bfc5e571bfa73 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/flashrom/+/40576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Revert "pcidev.c: Factor out pcidev_validate() into pure fn"Nico Huber2020-01-191-29/+24
| | | | | | | | | | | | | | This reverts commit e28d75ed7204d7fac2c0fac13978098530b0574e. This is broken in multiple ways, e.g. pcidev_init() can only return NULL. Change-Id: I06242147ba9d3a062d442f645eb0800ef51af19f Signed-off-by: Nico Huber <nico.h@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Reported-by: Michael Bishop <cleverca22@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/38319 Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* pcidev.c: Factor out pcidev_validate() into pure fnEdward O'Callaghan2019-11-281-24/+29
| | | | | | | | | | This makes writing unit-tests easier. Change-Id: Ia2718f1f40851d3122741cd0e50b0c2b647b727a Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/37264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* tree: Make internal functions staticJacob Garber2019-06-231-1/+1
| | | | | | | | | | | | None of these functions are used outside of the files they are defined in, so make them all static. Change-Id: Ie9cbe12d289bcedacf2f1bf483ae64ef8039ccc1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Remove unneeded white spacesElyes HAOUAS2018-06-241-3/+3
| | | | | | | | | Change-Id: I90f171924790ced74a62ca344fee8607607aa480 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix whitespace errorsElyes HAOUAS2018-04-241-2/+2
| | | | | | | | Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* rpci: Use pci_dev struct pointer to avoid API breaksYouness Alaoui2017-08-101-9/+15
| | | | | | | | | | | | | | | | | | | | | | The pci_dev structure is never meant to be used as is, but always as a pointer. By using the struct itself in undo_pci_write_data, we are risking data corruption, or buffer overflows if the structure size changes. This is especially apparent on my system where flashrom segfaults because I compile it with pciutils 3.3.0 and I run it on a system with pciutils 3.5.2. The struture size is different and causes a struct with the wrong size to be sent to the library, with invalid internal field values. This has been discovered and discussed in Change ID 18925 [1] [1] https://review.coreboot.org/#/c/18925/ Change-Id: Icde2e587992ba964d4ff92c33aa659850ba06298 Signed-off-by: Youness Alaoui <kakaroto@kakaroto.homelinux.net> Reviewed-on: https://review.coreboot.org/20784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Move global io_base_addr into compilation unitsStefan Tauner2014-06-011-1/+0
| | | | | | | Corresponding to flashrom svn r1813. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add additional error handling to pcidev_readbar() callersNiklas Söderlund2013-08-231-1/+1
| | | | | | | | | | | This is mostly a leftover of Niklas' "remove exit call from pcidev_init" patch. While not explicitly necessary detecting errors early is usually a good idea. Corresponding to flashrom svn r1718. Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Decouple BAR reading from pci device init, handle errors gracefullyCarl-Daniel Hailfinger2013-01-051-12/+15
| | | | | | | | | | | | | | | Pcidev_init() now returns struct pci_device * instead of a BAR stored in PCI config space. This allows for real error checking instead of having exit(1) everywhere in pcidev.c. Thanks to Niklas Söderlund for coming up with the original error handling patch which was slightly modified and folded into this patch. Move the declaration of struct pci_device in programmer.h before the first user. Corresponding to flashrom svn r1644. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify PCI init and let pcidev clean itself upStefan Tauner2013-01-041-3/+34
| | | | | | | | | | | | | | | | | | | Previously the internal programmer used its own code to initialize pcilib. This patch extracts the common code from the internal programmer and pcidev_init() into pcidev_init_common(). This fixes the non-existent PCI cleanup of the internal programmer and adds an additional safety by checking for an already existing PCI context. We got a nice shutdown function registration infrastructure, but did not use it very wisely. Instead we added shutdown functions to a myriad of programmers unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc) by adding a shutdown function the pcidev.c itself that gets registered by pcidev_init(). Corresponding to flashrom svn r1642. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Unify usbdev_status and pcidev_status into dev_entryStefan Tauner2012-12-271-1/+1
| | | | | | | | | | | | | | | | | | | Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor PCI and USB device status printingStefan Tauner2012-12-271-13/+0
| | | | | | | | | | | | | | | | | To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices. Corresponding to flashrom svn r1631. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Hide hwaccess.h from public APIPatrick Georgi2012-07-201-0/+1
| | | | | | | | | | | | | Move hwaccess.h #include from flash.h to individual drivers. libflashrom users need flash.h, but they do not care about hwaccess.h and should not see its definitions because they may conflict with other hardware access functions and #defines used by the libflashrom user. Corresponding to flashrom svn r1549. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Check vendor_id for PCI based external programmersCarl-Daniel Hailfinger2012-07-161-131/+114
| | | | | | | | | | | | | | Restructure PCI device detection code. Rename pcidev_validate to pcidev_readbar. Note: Slight changes in behaviour are possible, especially on dual/quad chip NICs which appear as more than one PCI device. Found devices are no longer printed at _pinfo level, but rather at _pdbg level. Corresponding to flashrom svn r1548. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-3/+3
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix unchecked malloc calls and casts of malloc return valuesStefan Tauner2011-07-121-0/+4
| | | | | | | | | | | | In the long term the exit calls should be replaced by returns. until then this is the correct way to handle failures. the casts are not needed (in C) and we don't cast malloc return values anywhere else. Corresponding to flashrom svn r1370. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove vendorid parameter from pcidev_init()Carl-Daniel Hailfinger2011-03-071-4/+5
| | | | | | | | | | | | | | | Simplify pcidev_init by killing the vendorid parameter which was pretty useless anyway since it was present in the pcidevs parameter as well. This also allows us to handle multiple programmers with different vendor IDs in the same driver. Fix compilation of flashrom with only the nicrealtek driver. Corresponding to flashrom svn r1274. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Support 64-bit MEM BARs wherever possibleCarl-Daniel Hailfinger2011-02-151-22/+131
| | | | | | | | | | | | | | | | | Add more sanity checks for BARs and abort if resources are unreachable. Undecoded resources are reported, but flashrom will proceed anyway just in case the BIOS screwed up the configuration. (The empty CardBus handler is intentional, according to the spec no BARs in PCI config space are used by CardBus.) Found while working on a driver for the Angelbird PCIe-based SSD which has 64-bit capable MEM BARs. Corresponding to flashrom svn r1261. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Revert PCI config space writes on shutdownCarl-Daniel Hailfinger2010-11-101-0/+70
| | | | | | | | | | | | | | | This means all chipset enables etc. will be undone on shutdown. Reversible PCI config space writes now use rpci_write_*(). PCI config space writes which are one-shot (e.g. communication via config space) should continue to use the permanent pci_write_* variants. Extend the number of available register_shutdown slots to 32. Corresponding to flashrom svn r1232. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Refine text of requests to send logsPaul Menzel2010-10-081-3/+5
| | | | | | | | | | | A lot of messages sent@flashrom.org just have "flashrom -V" as the subject. Ask people to include more information in the subject line to make life easier for developers/supporters. Corresponding to flashrom svn r1202. Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* List the devices for all supported programmers in "flashrom -L" outputCarl-Daniel Hailfinger2010-10-071-1/+1
| | | | | | | | | | | Fix PCI device ID printing. Remove personal e-mail addresses from the man page, point people to flashrom@flashrom.org instead. Corresponding to flashrom svn r1200. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refine -L output to include all programmer modulesCarl-Daniel Hailfinger2010-10-061-0/+1
| | | | | | | | | | | Flashrom -L output did not contain a list of programmers nor were all programmers listed. Fix it and mention at least the name of each programmer. Wiki output is unchanged, and will need separate fixups. Corresponding to flashrom svn r1199. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Update the author list in the man pageCarl-Daniel Hailfinger2010-10-061-1/+1
| | | | | | | | | Update programmer parameter documentation. Corresponding to flashrom svn r1197. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-1/+1
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-1/+4
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert various prints to use msg_p* and msg_g* respectivelySean Nelson2010-05-071-6/+6
| | | | | | | | | Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel. Corresponding to flashrom svn r997. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* PCI device BARs of all types had only bits 1:0 cleared while reading the addressCarl-Daniel Hailfinger2010-03-171-1/+17
| | | | | | | | | | | | That was correct for IO BARs, but failed to mask bit 3:2 for MEM BARs, resulting in odd offsets for prefetchable MEM BARs and for 64-bit capable MEM BARs. Mask the correct number of bits for all types of BARs and add some debug printing about BAR type. Corresponding to flashrom svn r946. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Replace PCI_OK/PCI_NT by OK/NTMichael Karcher2010-02-241-2/+2
| | | | | | | | | | We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table). Corresponding to flashrom svn r911. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Adjust a help text for external PCI programmers to the new parameter schemeCarl-Daniel Hailfinger2009-10-301-1/+1
| | | | | | | | | Pointed out by Maciej Pijanka. Corresponding to flashrom svn r754. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add initial support for flashing some NVIDIA graphics cardsUwe Hermann2009-09-301-5/+11
| | | | | | | | | | | | | | | | | | | | The new option is '-p gfxnvidia', rest of the interface is as usual. I tested a successful identify and read on a "RIVA TNT2 Model 64/Model 64 Pro" card for now, erase and write did NOT work properly so far! Please do not attempt to write/erase cards yet, unless you can recover! In addition to the NVIDIA handling code it was required to call programmer_shutdown() in a lot more places, otherwise the graphics card will be disabled in the init function, but never enabled again as the shutdown function is not called. The shutdown handling may be changed to use atexit() later. Corresponding to flashrom svn r737. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* Add support for parallel flash on Dr. Kaiser PC-Waechter PCI devicesTURBO J2009-09-021-6/+6
| | | | | | | | | | | | | | The vendor sold different designs under that name, the patch works with the one that has an Actel FPGA as PCI-to-Flash bridge. The Flash chip is a "Macronix MX29F001B" (128 KB, parallel) soldered directly to the PCB. Flash operations (PROBE, READ, ERASE, WRITE) work as expected. Corresponding to flashrom svn r712. Signed-off-by: TURBO J <turboj@gmx.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use a common parameter variable for all programmersCarl-Daniel Hailfinger2009-08-121-2/+1
| | | | | | | | | | This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Corresponding to flashrom svn r679. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Remove unnecessary #include filesCarl-Daniel Hailfinger2009-08-091-3/+0
| | | | | | | | | | Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Corresponding to flashrom svn r671. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* The project's new home is flashrom.org nowStefan Reinauer2009-07-301-1/+1
| | | | | | | | | Change all occurences in the source code and documentation accordingly. Corresponding to flashrom svn r669. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Various smaller flashrom improvementsUwe Hermann2009-05-171-6/+6
| | | | | | | | | | | | | | | | | | - Document new 'satasii' programmer in -L output and manpage. - Drop PCI_IO_BASE_ADDRESS, pci.h has such #defines already. - Beautify flashrom output and make it more consistent. - Same for the 'make' output (reordered some $CC parameters). Build-tested on i386, shouldn't break any builds, I think. - Some variable renaming and other cosmetic fixes. Corresponding to flashrom svn r529. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* This patch adds support for BIOS flashing on the all SiliconImage SATA ↵Rudolf Marek2009-05-171-2/+0
| | | | | | | | | | | | | controllers It was easy because 1) flashrom has now nice API 2) documentation is public on the web site Corresponding to flashrom svn r527. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add proper workaround for 3COM 3C90xB cards, which need special fixups (the ↵Uwe Hermann2009-05-161-3/+7
| | | | | | | | | | | | | | | | 3C90xC ones don't) This is tested on hardware. Also, add initial support for the Atmel AT29C010A chip (which I inserted in a 3COM 3C90xB card for testing). It can be detected, read works, erase works, but write will need some additional code (will post in another patch later). Corresponding to flashrom svn r520. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Older libpci versions (e.gUwe Hermann2009-05-161-1/+4
| | | | | | | | | | | | | | 2.2.8, as it's default on current FreeBSD 7.2) don't properly fill the base_addr[0] struct member, so revert back to an explicit pci_read_long() call, otherwise detection of PCI devices and their base address will fail with strange error messages. Thanks Idwer Vollering <vidwer@gmail.com> for reporting and testing. Corresponding to flashrom svn r518. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refactor parts of the 3COM NIC codeUwe Hermann2009-05-151-0/+115
Move the reusable PCI specific parts into pcidev.c, they'll be usable for other NIC code (Realtek, VIA, ...) and also for SATA/IDE controller cards as external programmers (for every PCI device which can program EEPROMs basically). Also add print_supported_pcidevs() to show the supported PCI devices (currently only NICs, soon more) in the 'flashrom -L' output. Corresponding to flashrom svn r515. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>