aboutsummaryrefslogtreecommitdiffstats
path: root/programmer.h
Commit message (Collapse)AuthorAgeFilesLines
...
* Add general programmer sanity checksStefan Tauner2012-12-261-3/+1
| | | | | | | | | And remove the completely unused vendor field. Corresponding to flashrom svn r1630. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix flashrom running on boards with corebootStefan Tauner2012-09-241-1/+1
| | | | | | | | | | | | | | In r1577 we removed the discrimination of coreboot IDs and user-specified mainboards. The problem is that the board enable code required to find a board enable if either of these model strings were set. Therefore boards running coreboot that do not need a board enable failed to execute flashrom since then. This patch fixes this by handling coreboot IDs and user-supplied IDs differently again. Corresponding to flashrom svn r1605. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Fix compilation with MinGWStefan Tauner2012-09-011-0/+2
| | | | | | | | | | This was broken since r1557 when we got rid of some exit calls, but returned -1 instead which is not a valid HANDLE value. Corresponding to flashrom svn r1591. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Make struct flashchip a field in struct flashctx instead of a complete copyCarl-Daniel Hailfinger2012-08-251-1/+1
| | | | | | | | | | | | All the driver conversion work and cleanup has been done by Stefan. flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel. Corresponding to flashrom svn r1579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix VIA VX*** supportHelge Wagner2012-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | Helge Wagner's patch that added VIA VX900 chipset support made me look closer at the datasheets which led to some concise documentation about newer VIA chipsets: http://flashrom.org/VIA Based on that this patch adds full support for VX800/VX820, VX855/VX875 and VX900, including SPI and LPC. VT8237S was not changed (SPI support only) because there is no public datasheet and it is not clear how to distinguish between LPC and SPI strapping and investigations in (NDAed) documents have not brought up anything conclusively. enable_flash_vt823x could probably be enhanced too due to various ignored LPC options of the chipset. Corresponding to flashrom svn r1578. Signed-off-by: Helge Wagner <Helge.Wagner@ge.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor the -p internal:mainboard handlingStefan Tauner2012-08-201-6/+4
| | | | | | | | | | | | | | | | This patch gets rid of some global variables and makes lots of bits along the code path that control the board enable execution more generic and clearer. From now on flashrom aborts on a few more occasions that should be safer for the user. For example it aborts if the enable function for the specified mainboard (enable) can not be found. Parts of the board_match_cbname refactoring were done by Carl-Daniel. Corresponding to flashrom svn r1577. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move show_id to where it belongsStefan Tauner2012-08-111-3/+1
| | | | | | | | | And remove the unused force parameter. Corresponding to flashrom svn r1569. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Portability fixes and cleanupsCarl-Daniel Hailfinger2012-08-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move Mac OS X IOKit/DirectHW availability checks in the Makefile from compiler check to pciutils check. Print the compiler error messages for feature detection. Add DOS libpci in the Makefile includes only if a PCI-based programmer was requested. Restrict mmap usage in ich_descriptors_tool to Unix style systems. Build ich_descriptors_tool with the correct .exe extension on DOS/Windows. Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner) Print the Windows version instead of "unknown machine" on Windows. Don't #define our own __DARWIN__, use the standard OS X detection method. Update the README. Add more generated files to svn:ignore Corresponding to flashrom svn r1567. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Introduce enum test_stateStefan Tauner2012-07-281-5/+5
| | | | | | | | | | | | | | | | Previously boards in the wiki were tagged either as working or as known bad. But we added support to various boards via board enables that were then never tested because the owners have not reported back. This can now be tagged with NT and is shown appropriately. Also, the underlying data structure indicating state was converted from macros to an enum while preserving original integer values and is used for programmers and chipsets too. Corresponding to flashrom svn r1555. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Automatically release I/O permissions on shutdownCarl-Daniel Hailfinger2012-07-211-2/+1
| | | | | | | | | | | | | | | | | | | | | Get_io_perms() is renamed to rget_io_perms() and automatically registers a function to release I/O permissions on shutdown. Actually release I/O permissions on Solaris and iopl()-supporting operating systems like Linux. This patch fixes quite a few programmers which forgot to release I/O permissions on shutdown, and it simplifies the shutdown and error handling code for all others. Do not call exit(1) if I/O permissions are denied and return an error instead. This part of the patch was written by Niklas Söderlund. Corresponding to flashrom svn r1551. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Hide hwaccess.h from public APIPatrick Georgi2012-07-201-0/+2
| | | | | | | | | | | | | Move hwaccess.h #include from flash.h to individual drivers. libflashrom users need flash.h, but they do not care about hwaccess.h and should not see its definitions because they may conflict with other hardware access functions and #defines used by the libflashrom user. Corresponding to flashrom svn r1549. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Check vendor_id for PCI based external programmersCarl-Daniel Hailfinger2012-07-161-1/+1
| | | | | | | | | | | | | | Restructure PCI device detection code. Rename pcidev_validate to pcidev_readbar. Note: Slight changes in behaviour are possible, especially on dual/quad chip NICs which appear as more than one PCI device. Found devices are no longer printed at _pinfo level, but rather at _pdbg level. Corresponding to flashrom svn r1548. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+2
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add Winbond W836xx SuperI/O detectionCarl-Daniel Hailfinger2012-05-061-0/+2
| | | | | | | | | | | | Add ITE IT8707F/IT8710F detection. Note that we autodetect those chips, but we don't handle their flash translation features automatically yet. Corresponding to flashrom svn r1533. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add serial port bitbanging codeVirgil-Adrian Teaca2012-04-301-1/+39
| | | | | | | | | | | This adds the pony_spi driver which supports the SI_Prog adapter, which is commonly used for SPI chips with PonyProg 2000, and a custom adapter called "SERBANG" which differs in the logic of two pins. Corresponding to flashrom svn r1525. Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add a bunch of new/tested stuff and various small changes 12Stefan Tauner2012-04-271-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - ASUS M4A785T-M http://www.flashrom.org/pipermail/flashrom/2012-April/009118.html - ASUS P5VD2-MX http://www.flashrom.org/pipermail/flashrom/2012-March/009014.html - ASUS P8Z68-V PRO/GEN3 http://www.flashrom.org/pipermail/flashrom/2012-April/009086.html - Bachmann electronic OT200 http://www.flashrom.org/pipermail/flashrom/2012-April/009094.html - Biostar N61PB-M2S http://www.flashrom.org/pipermail/flashrom/2012-March/008958.html - GIGABYTE GA-H61M-D2-B3 http://www.flashrom.org/pipermail/flashrom/2012-March/009002.html - MSI MS-7740 (H61MA-E35(B3)) http://www.flashrom.org/pipermail/flashrom/2012-March/008985.html - Tyan S2875 (Tiger K8W) http://www.flashrom.org/pipermail/flashrom/2012-March/008986.html - ZOTAC nForce 630i Supreme (N73U-Supreme) http://www.flashrom.org/pipermail/flashrom/2012-April/009073.html - ZOTAC ZBOX AD02 (PLUS) http://www.flashrom.org/pipermail/flashrom/2012-April/009047.html NOT OK: - ASRock H67M http://www.flashrom.org/pipermail/flashrom/2012-March/008909.html - ASUS P8P67 LE http://paste.flashrom.org/view.php?id=1097 - ASUS Maximus IV Extreme http://www.flashrom.org/pipermail/flashrom/2012-March/009033.html - Biostar H61MU3 http://www.flashrom.org/pipermail/flashrom/2012-February/008832.html - Biostar M7VIQ http://www.flashrom.org/pipermail/flashrom/2012-February/008863.html - Dell Inspiron 580 http://www.flashrom.org/pipermail/flashrom/2012-March/008888.html - Dell Vostro 460 http://www.flashrom.org/pipermail/flashrom/2012-April/009144.html - Fujitsu-Siemens CELSIUS W410 (D3062-A1) http://www.flashrom.org/pipermail/flashrom/2012-March/008987.html - EPoX EP-3PTA http://www.flashrom.org/pipermail/flashrom/2012-April/009043.html - HP XW6400 http://www.flashrom.org/pipermail/flashrom/2012-March/009006.html - HP XW9300 http://www.flashrom.org/pipermail/flashrom/2012-February/008862.html - Intel DG965OT http://paste.flashrom.org/view.php?id=1096 - Intel DN2800MT (Marshalltown) http://www.flashrom.org/pipermail/flashrom/2012-April/009095.html - Lenovo T420 http://paste.flashrom.org/view.php?id=1095 - Lenovo X1 http://www.flashrom.org/pipermail/flashrom/2012-April/009135.html - MSI GF615M-P33 http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html Tested flash chips: - mark EN25Q32(A/B) as TEST_OK_PROBE (+P) http://www.flashrom.org/pipermail/flashrom/2012-February/008832.html - mark S25FL032A as TEST_OK_PR (+PR) http://www.flashrom.org/pipermail/flashrom/2012-April/009105.html - mark AT25DF161 as TEST_OK_PROBE (+P) http://www.flashrom.org/pipermail/flashrom/2012-April/009095.html - mark SST as TEST_OK_PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2012-April/009094.html Tested chipset enables: - H61 (various reports) - SiS 755 http://www.flashrom.org/pipermail/flashrom/2012-April/009072.html - Fix compilation of ich_descriptor_tool which was broken since r1492. - Add Documentation regarding unlocking the ME region on Intel chipsets. - Fix reading the flash descriptor via FDOC/FDOD and prettyprinting of the descriptor on boards with 5 active regions. - Reorder some boards in print.c. - Add Intel 7 Series (Panther Point) PCI IDs. - Add preliminary PCI IDs for future Intel chipsets (DH89xxCC and Lynx Point) see https://lkml.org/lkml/2012/2/20/467 - Change the message for untested chipsets to send only after an attempt to update the firmware with flashrom. - Fix warnings in ich_descriptor_tool's build. Corresponding to flashrom svn r1524. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix parallel-style programmer access from ITE IT87/Winbond W83627 SPICarl-Daniel Hailfinger2012-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ITE IT87 SPI driver uses a trick to speed up reading and writing: If a flash chip is 512 kByte or less, the flash chip can be completely mapped in memory and both read and write accesses are faster that way. The current IT87 SPI code did use the parallel programmer interface for memory mapped reads and writes, but that's the wrong abstraction. It has been fixed to use mmio_read*/mmio_write* for that purpose. The Winbond W83627 SPI driver uses the same trick in its read path for all supported chip sizes. Fix it the same way. Switch internal_chip_readn to use mmio_readn as proper abstraction. Kudos to Michael Karcher for spotting the bugs. Tested-by: Johan Svensson <flashrom.js@crypt.se> Corresponding to flashrom svn r1511. Reported-by: Johan Svensson <flashrom.js@crypt.se> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Support compilation for the ARM architecture (little-endian only)David Hendricks2012-02-131-1/+1
| | | | | | | | | | | | | Note: The internal programmer will abort during processor check. This is intentional. The other hardware drivers (except those using port I/O) should work. Corresponding to flashrom svn r1492. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: David Hendricks <dhendrix@google.com> Tested-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Replace --mainboard with -p internal:mainboardCarl-Daniel Hailfinger2012-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | NOTE: The --list-supported-wiki output changed to use -p internal:mainboard= instead of -m The --list-supported output changed the heading of the mainboard list from Vendor Board Status Required option to Vendor Board Status Required value for -p internal:mainboard= Fix lb_vendor_dev_from_string() not to write to the supplied string. Corresponding to flashrom svn r1483. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add ich_descriptor_tool to decode all flash descriptors stored in a flash ↵Stefan Tauner2011-12-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | dump file This patch adds an external utility that shares most of the existing descriptor decoding source code. Additionally to what is available via FDOC/FDOD this allows to access: - the softstraps which are used to configure the chipset by flash content without the need for BIOS routines. on ICH8 it is possible to read those with FDOC/FDOC too, but this was removed in later chipsets. - the ME VSCC (Vendor Specific Component Capabilities) table. simply put, this is an SPI chip database used to figure out the flash's capabilities. - the MAC address stored in the GbE image. Intel thinks this information should be confidential for ICH9 and up, but references some tidbits in their public documentation. This patch includes the human-readable information for ICH8, Ibex Peak (5 series) and Cougar Point (6 series); the latter two were obtained from leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9 and 10 is unknown to us yet. It can probably found in: "Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide" Information regarding the upcoming Panther Point chipset is also not included. Corresponding to flashrom svn r1480. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Matthias Wenzel <bios@mazzoo.de>
* Have all programmer init functions register bus masters/programmersCarl-Daniel Hailfinger2011-12-201-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | All programmer types (Parallel, SPI, Opaque) now register themselves into a generic programmer list and probing is now programmer-centric instead of chip-centric. Registering multiple SPI/... masters at the same time is now possible without any problems. Handling multiple flash chips is still unchanged, but now we have the infrastructure to deal with "dual BIOS" and "one flash behind southbridge and one flash behind EC" sanely. A nice side effect is that this patch kills quite a few global variables and improves the situation for libflashrom. Hint for developers: struct {spi,par,opaque}_programmer now have a void *data pointer to store any additional programmer-specific data, e.g. hardware configuration info. Note: flashrom -f -c FOO -r forced_read.bin does not work anymore. We have to find an architecturally clean way to solve this. Corresponding to flashrom svn r1475. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-67/+31
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-10/+10
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-8/+8
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Register Parallel/LPC/FWH programmers the same way SPI programmers are ↵Carl-Daniel Hailfinger2011-11-091-12/+13
| | | | | | | | | | | | | | | | | | | | registered All programmers are now calling programmer registration functions and direct manipulations of buses_supported are not needed/possible anymore. Note: Programmers without parallel/LPC/FWH chip support should not call register_par_programmer(). Additional fixes: Set max_rom_decode.parallel for drkaiser. Remove abuse of programmer_map_flash_region in it85spi. Annotate several FIXMEs in it85spi. Corresponding to flashrom svn r1463. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* ichspi: use a variable to distinguish ich generations instead of ↵Stefan Tauner2011-11-061-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_programmer->type The type member is enough most of the time to derive the wanted information, but - not always (e.g. ich_set_bbar), - only available after registration, which we want to delay till the end of init, and - we really want to distinguish between chipset version-grained attributes which are not reflected by the registered programmer. Hence this patch introduces a new static variable which is set up early by the init functions and allows us to get rid of all "switch (spi_programmer->type)" in ichspi.c. We reuse the enum introduced for descriptor mode for the type of the new variable. Previously magic numbers were passed by chipset_enable wrappers. Now they use the enumeration items too. To get this working the enum definition had to be moved to programmer.h. Another noteworthy detail: previously we have checked for a valid programmer/ich generation all over the place. I have removed those checks and added one single check in the init method. Calling any function of a programmer without executing the init method first, is undefined behavior. Corresponding to flashrom svn r1460. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add opaque programmer registration infrastructureCarl-Daniel Hailfinger2011-11-041-0/+15
| | | | | | | | | | | | An opaque programmer does not allow direct flash access and only offers abstract probe/read/erase/write methods. Due to that, opaque programmers need their own infrastructure and registration framework. Corresponding to flashrom svn r1459. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* serprog: small improvementsStefan Tauner2011-10-221-2/+3
| | | | | | | | | | | - rename serprog_delay parameter to usecs - fix code style, (output) formatting issues and comments - sp_docommand: remove unnecessary malloc+memcpy and fix formatting Corresponding to flashrom svn r1456. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-7/+7
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-7/+7
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* serprog: add SPI supportUrja Rannikko2011-09-151-0/+6
| | | | | | | | | | | | Adds a new opcode (0x13) that just relays SPI bytes and wires it up to be usable within serprog.c. Checks for mandatory opcodes are moved around and changed a bit, but non-SPI programmers should not be harmed by this patch. Corresponding to flashrom svn r1442. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Change programmer selection in cli and generic codeCarl-Daniel Hailfinger2011-09-081-3/+1
| | | | | | | | | | | | | | Bugfix: Do not accept multiple conflicting --programmer selections. Restriction: Do not accept multiple --programmer selections even if there is no conflict. Unexport the programmer variable. programmer_init requires the programmer as first parameter. The default programmer selection is now part of cli_classic. Corresponding to flashrom svn r1433. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for the Linux SPI subsystem (spidev)Sven Schnelle2011-09-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | See http://www.kernel.org/doc/Documentation/spi/spidev for an introduction. Usage is as follows: flashrom -p linux_spi:dev=/dev/spidevX.Y where X is the bus number, and Y device. It accepts an optional parameter 'speed' which allows to set the SPI clock speed in kHz. Tested on an Atmel AVR32AP7000 board (NGW100 Network Gateway Kit), see below, which was used to program a ThinkPad X60, but it should work on every other Linux system, too. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102) Corresponding to flashrom svn r1427. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a bunch of new/tested stuff and various small changes 7Sylvain "ythier" Hitier2011-09-031-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add Asus Crosshair IV Extreme to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007640.html - add Biostar N68S3+ to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-September/007788.html - add P7H55-M LX to the list of supported boards although flashrom works correctly, it is marked as not ok, because flashing the vendor image will break the LAN interface. - add GA-X58A-UD7 to the list of supported boards http://paste.flashrom.org/view.php?id=739 - add Asus P4P800-VM to print.c (has a working board enable) - add Asus K8V-X to print.c reported by florz http://paste.flashrom.org/view.php?id=742 - add Intel D865GLC to print.c as non-working (ICH5 with BIOS lock enable) reported by jmd on IRC http://paste.flashrom.org/view.php?id=775 - add Intel DH67CF to print.c as non-working (H67 with BIOS lock enable and locked ME region) http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html - add ECS P4M800PRO-M (V1.0A) to the list of supported boards reported by dweg on IRC (hot flashed a SST49LF040B, original was W39V040B) - add X8DTU-6TF+ to print.c (needs ME unlocking) http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - add Shuttle FH67 (used in the SH67H3 barebone) to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - add Tyan S2912 to the list of supported boards reported by erlan on IRC - add ZOTAC GeForce 8200 to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007612.html - mark AT25DF321A as TEST_OK_PROBE http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - mark 28F001BN/BX-T as TEST_OK_PR http://www.flashrom.org/pipermail/flashrom/2011-July/007208.html - rename MX29F002 http://patchwork.coreboot.org/patch/2794/ - mark SST39SF040 as fully tested reported by Florian 'florz' Zumbiehl http://paste.flashrom.org/view.php?id=742 - mark SST49LF040B as fully tested reported by dweg on IRC and later by Armin on the ml: http://www.flashrom.org/pipermail/flashrom/2011-August/007764.html - mark H55 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html - mark H67 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - mark a MCP61 version as OK http://www.flashrom.org/pipermail/flashrom/2011-September/007788.html - add preliminary X79 (patsburg) PCI IDs 0x1d40 was reported already as working (not archived in our pipermail?) http://marc.info/?l=flashrom&m=130683026218257&w=2 - mark "82557/8/9/0/1 Ethernet Pro 100" in nicintel.c as working http://www.flashrom.org/pipermail/flashrom/2011-August/007480.html - rename some chips that had gratuitous "probing" suffixes: - SST25VF010.REMS - SST25VF040.REMS - M25P05.RES - M25P10.RES some other chip names with suffixes are needed due to lack of support for multiple probe functions per chip. this is explained here: http://www.flashrom.org/pipermail/flashrom/2011-August/007597.html - remove unneeded nicintel_spi-related function declarations in programmer.h - typos and whitespace fixes - fix Asus P4P800-E Deluxe detection The original board enable was added before DMI matching and used the IDs of a Promise controller as secondary PCI ID set. The controller could be disabled in the BIOS which would make the board not match. This patch uses the SMBus controller instead and adds a DMI pattern. This was Tested-by: Michael Schneider <vdrportal_midas at gmx dot de> Corresponding to flashrom svn r1425. - add "Sealed-case PC" to the list of chassis type (as indicating "not a laptop") This is Acked-by: Idwer Vollering <vidwer@gmail.com> the fix for the typo unusued -> unused is Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> everything else is Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> And everything was reviewed and Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Shorten some board enable related function namesCarl-Daniel Hailfinger2011-08-311-2/+2
| | | | | | | Corresponding to flashrom svn r1424. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Change "class" parameter name to "devclass" to avoid C++ issuesUwe Hermann2011-07-131-1/+1
| | | | | | | | | | | | In C++ "class" is a reserved keyword, and as we'll want to use libflashrom from C++ code at some point, let's make sure it doesn't cause issues. Other places in the code already used "devclass" anyway, so it also increases consistency and readability a bit. Corresponding to flashrom svn r1371. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Constify (a few) parameters.c where possibleStefan Tauner2011-06-261-1/+1
| | | | | | | Corresponding to flashrom svn r1354. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation for CONFIG_INTERNAL=noCarl-Daniel Hailfinger2011-06-091-17/+13
| | | | | | | | | | | | CONFIG_INTERNAL implies Super I/O support and NEED_PCI. NEED_PCI is only used to guard PCI stuff which may be needed for external PCI-based programmers. That way, using #if NEED_PCI can be avoided inside #if CONFIG_INTERNAL. Corresponding to flashrom svn r1326. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Eliminate magic numbers indicating maximum column sizes in print.cStefan Tauner2011-05-261-4/+4
| | | | | | | | | | | Without this the magic numbers need to be kept in sync with the maximum length of the strings printed in the corresponding column. if not, an overflow and a nasty ' '-storm occur on executing flashrom -L. Corresponding to flashrom svn r1318. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Kill central list of SPI programmersMichael Karcher2011-05-111-35/+5
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-13/+8
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Intel NIC with parallel flash supportCarl-Daniel Hailfinger2011-05-081-1/+13
| | | | | | | | | | Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Corresponding to flashrom svn r1297. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Anton Kochkov <anton.kochkov@gmail.com> Acked-by: Anton Kochkov <anton.kochkov@gmail.com>
* Revamp board-specific quirk handling, allow for laptop supportCarl-Daniel Hailfinger2011-05-051-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Handle board-specific quirks in three phases: 1. Before Super I/O probing (e.g. blacklisting of some Super I/O probes, or unhiding the Super I/O) 2. Before the laptop enforcement decision (e.g. whitelisting a laptop for flashing) 3. After chipset enabling (all current board enables) Implementation note: All entries in board_pciid_enables get an additional phase parameter. Alternative variants (3 tables instead of 1) also have their downsides, and I chose table bloat over table multiplication). With this patch, it should be possible to whitelist supported laptops with a matching entry (phase P2) in board_pciid_enables which points to a function setting laptop_ok=1. (In case DMI is broken, matching might be a little bit more difficult, but it is still doable.) Corresponding to flashrom svn r1294. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Constify flashchips arrayCarl-Daniel Hailfinger2011-05-041-1/+1
| | | | | | | | | This moves 99.5% of the .data section to .rodata (which ends up in .text). Corresponding to flashrom svn r1293. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Revert MMIO space writes on shutdown as neededCarl-Daniel Hailfinger2011-05-031-0/+12
| | | | | | | | | | | | | | | | | | Reversible MMIO space writes now use rmmio_write*(). Reversible PCI MMIO space writes now use pci_rmmio_write*(). If a MMIO value needs to be queued for restore without writing it, use rmmio_val*(). MMIO space writes which are one-shot (e.g. communication with some chip) should continue to use the permanent mmio_write* variants. Corresponding to flashrom svn r1292. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> David tested it successfully on some NM10/ICH7 platforms which switch between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM). Acked-by: David Hendricks <dhendrix@google.com>
* Add support for more than one Super I/O or EC per machineCarl-Daniel Hailfinger2011-04-271-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Flashrom currently only supports exactly one Super I/O or Embedded Controller, and this means quite a few notebooks and a small subset of desktop/server boards cannot be handled reliably and easily. Allow detection and initialization of up to 3 Super I/O and/or EC chips. WARNING! If a Super I/O or EC responds on multiple ports (0x2e and 0x4e), the code will do the wrong thing (namely, initialize the hardware twice). I have no idea if we should handle such situations, and whether we should ignore the second chip with identical ID or not. Initializing the hardware twice for the IT87* family is _not_ a problem, but I don't know how well IT85* can handle it (and whether IT85* would listen at more than one port anyway). Corresponding to flashrom svn r1289. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI. Test report (success) is here: http://paste.flashrom.org/view.php?id=379 Thanks to David Hendricks for testing on a Google Cr-48 laptop with ITE IT85* EC SPI. Test report (success) is here: http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html Acked-by: David Hendricks <dhendrix@google.com>
* Various IT85* cleanups and fixesCarl-Daniel Hailfinger2011-03-081-1/+3
| | | | | | | | | | | | | | | | | | | | Fix a few typos. Change the EC memory region mapping name. Drop unused function parameter. Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory locations instead of plain pointer access which is optimized away by gcc. Use own it85_* SPI high-level chip read/write functions instead of relying on unrelated ICH functions. Corresponding to flashrom svn r1279. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> David writes: I applied the patch against the Chromium OS branch and successfully tested read and write operations on a Cr48. Acked-by: David Hendricks <dhendrix@google.com>
* Fix compilation if CONFIG_INTERNAL=noCarl-Daniel Hailfinger2011-03-081-1/+1
| | | | | | | | | | | Fix compilation if everything except CONFIG_SATAMV is no. Do not compile in PCI support for wiki printing if no PCI devices are supported. Corresponding to flashrom svn r1278. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Remove vendorid parameter from pcidev_init()Carl-Daniel Hailfinger2011-03-071-4/+1
| | | | | | | | | | | | | | | Simplify pcidev_init by killing the vendorid parameter which was pretty useless anyway since it was present in the pcidevs parameter as well. This also allows us to handle multiple programmers with different vendor IDs in the same driver. Fix compilation of flashrom with only the nicrealtek driver. Corresponding to flashrom svn r1274. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 05:22:41 +0000