aboutsummaryrefslogtreecommitdiffstats
path: root/programmer_table.c
Commit message (Collapse)AuthorAgeFilesLines
* ch347_spi: Add initial support for the WCH CH347Nicholas Chin2023-02-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Add support for the WCH CH347, a high-speed USB to bus converter supporting multiple protocols interfaces including SPI. Currently only mode 1 (vendor defined communication interface) is supported, mode 2 (USB HID communication interface) support will be added later. The code is currently hard coded to use CS1 and a SPI clock of 15 MHz, though there are 2 CS lines and 6 other GPIO lines available, as well as a configurable clock divisor for up to 60MHz operation. Support for these will be exposed through programmer parameters in later commits. This currently uses the synchronous libusb API. Performance seems to be alright so far, if it becomes an issue I may switch to the asynchronous API. Tested with a MX25L1606E flash chip Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Change-Id: I31b86c41076cc45d4a416a73fa1131350fb745ba Reviewed-on: https://review.coreboot.org/c/flashrom/+/70573 Reviewed-by: Thomas Heijligen <src@posteo.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* asm106x: add programmer for ASM106x SATA controllersAlex Badea2023-02-271-0/+4
| | | | | | | | | | | | | | | | | | | | The ASMedia ASM106x series is a PCIe-SATA controller chip. It supports an attached SPI flash chip that can contain configuration and PCI option ROM. The interface is a simple shifter accessed via PCI config space, up to 4 bytes at a time. Add a programmer driver for it. Tested on a G536PCE1061V11 IO-PCE1061-V1.1 PCIe card, and a MPCE2ST-A01 VER006S mini-PCIe card, both with chips marked ASM1061, both enumerate as: 01:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:1060] Change-Id: I591b117be911bdb8249247c20530c1cf70f6e70d Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/73037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
* dirtyjtag: Add DirtyJTAG programmerJean THOMAS2022-10-151-0/+4
| | | | | | | | | | | | | | | | Add a new programmer driver for the DirtyJTAG project (a USB-JTAG firmware for STM32 MCUs). Successfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103 development board and a SST25VF020B SPI flash chip. Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913 Signed-off-by: Jean THOMAS <virgule@jeanthomas.me> Reviewed-on: https://review.coreboot.org/c/flashrom/+/67878 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Rename lspcon_i2c_spi to parade_lspconThomas Heijligen2022-07-171-2/+2
| | | | | | | | | | | | | | | | | | | | | The chip targeted by the `lspcon_i2c_spi` programmer is a Parade PS175. Rename the programmer to match the chips vendor / family instead of the generic LSPCON protocol. Remove the `_i2c_spi` ending in preparation to become an opaque master. The chip is visible on an Acer Chromebox CXI4. https://www.paradetech.com/products/ps175/ https://www.acer.com/ac/en/US/content/series/acerchromeboxcxi4 TEST: `make CONFIG_PARADE_LSPCON=yes` and `meson build -Dconfig_parade_lspcon=true` produces flashrom binaries with the parade_lspcon programmer included. Change-Id: I9148be6d9162c1722ff739929ca5e181b628dd57 Signed-off-by: Thomas Heijligen <src@posteo.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/65547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Add mediatek_i2c_spi interfaceNeill Corlett2022-02-011-0/+4
| | | | | | | | | | | | | | | Add a spi_master interface supporting MediaTek MST9U ISP mode. Autodetect the bus type via I2C_FUNC_I2C, and use the appropriate read/write commands, in case the MST9U is attached to smbus. TEST=Successfully programmed SPI on test hardware. Change-Id: I24adb14e7b4f7160e1c3ff941774064d5a81e820 Signed-off-by: Neill Corlett <corlett@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/61288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* mec1308: remove MEC1308 EC programmerVictor Ding2021-09-221-4/+0
| | | | | | | | | | | | | | | | | Best efforts were made to upstream older Chromebook support for good intentions for folks interested. However, we no longer have the hardware available to test and maintain the code as the hardware is now end of life. Therefore the code state has sadly fallen into a unknown state. BUG=none BRANCH=none TEST=builds and ninja test passes Signed-off-by: Victor Ding <victording@google.com> Change-Id: I535b6380846734c999474519e9e60a73eb6a2ec4 Reviewed-on: https://review.coreboot.org/c/flashrom/+/56476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ene_lpc: remove ENE LPC programmerVictor Ding2021-09-221-4/+0
| | | | | | | | | | | | | | | | | Best efforts were made to upstream older Chromebook support for good intentions for folks interested. However, we no longer have the hardware available to test and maintain the code as the hardware is now end of life. Therefore the code state has sadly fallen into a unknown state. BUG=none BRANCH=none TEST=builds and ninja test passes Signed-off-by: Victor Ding <victording@google.com> Change-Id: I3f40db22c42c04ce029c4defd837e05ebb550c9b Reviewed-on: https://review.coreboot.org/c/flashrom/+/56475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* programmer_table: Remove space between address operator and variableAnastasia Klimchuk2021-08-091-2/+2
| | | | | | | | | | | | | | | BUG=none TEST=builds Change-Id: Iba29b1bc3d77b8c17c51fc0552c129e6965fa308 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/56469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* programmer_table: move each entry to the associated programmer sourceThomas Heijligen2021-06-101-474/+0
| | | | | | | | | Change-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* programmer_table: convert entries to pointersThomas Heijligen2021-06-091-358/+515
| | | | | | | | | | Allows us to move the individual entries into their respective driver files. Change-Id: Ifbb0ee4db5a85b1cd2afeafe4dca838579f79878 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* programmer_table: move array content to an own fileThomas Heijligen2021-06-091-0/+493
Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-24 13:32:28 +0000