| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A NULL func pointer is necessary and sufficient for the
condition `NULL func pointer => fallback_chip_X' as to not
need this explicit specification.
Therefore drop the explicit need to specify these fallback
callback function pointer in the par_master struct.
This is a reasonable default for every driver in the tree.
Furthermore, move the 'fallback_chip_X()' func from the
generic programmer.c register logic into its relevant
home of parallel.c and make static local to clean up
link-time symbol space.
This simplifies the code and driver development.
Change-Id: If25c0048a07057aa72be6ffa8d8ad7f0a568dcf7
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/71745
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A NULL func pointer is necessary and sufficient for the
condition `NULL func pointer => default_spi_write_aai' as to not
need this explicit specification of 'default'.
Therefore Drop the explicit need to specify the 'default_spi_write_aai'
callback function pointer in the spi_master struct. This is a reasonable default for every other driver in the tree with only a few exceptions.
This simplifies the code and driver development.
Change-Id: I7f14aaea0edcf0c08cea0e9cd27d58152707fb2a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67479
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The non-custom driver programmer delay implementation
'internal_delay()' is unrelated specifically to the
'internal' programmer. The delay implementation is
simply a platform-agnostic host delay implementation.
Therefore, rename to simply default_delay().
Change-Id: I5e04adf16812ceb1480992c92bca25ed80f8897a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/68855
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Handle the special cases of both serprog and ch341a_spi.
Also rewrite programmer_delay() to handle the two base
cases of zero time and no valid flashctx yet before
handling per master branching.
Additionally, modify the custom delay function pointer
signature to allow closure over the flashctx. This allows
driver specific delay implementations to recover programmer
specific opaque data within their delay implementations.
Therefore programmer specific delay functions can avoid
programmer specific globals.
Change-Id: Id059abb58b31a066a408009073912da2b224d40c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move (un)map_flash_region function pointers from programmer_entry to
par_master, spi_master, and opaque_master. This enables programmers to
specify a different mapper per bus, which is needed for the internal
programmer. Mapping is closely tied to the way the memory is accessed
using the other functions in the bus master structs.
Validate that FWH/LPC programmers provide specialized mapping in
register_par_master(); this is needed for chips with
FEATURE_REGISTERMAP, which only exist on FWH or LPC buses.
programmer.c: Update comment in fallback_map(), NULL return is the
desired behavior.
Test: Read firmware on SB600 Promontory mainboard (requires physmap)
Test: Read firmware externally with ft2232_spi
Test: Read firmware on ICH hwseq, verify physmap still occurs
Change-Id: I9c3df6ae260bcdb246dfb0cd8e043919609b014b
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Co-Authored-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67695
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Drop the explicit need to specify the default 'fallback_{un}map'
callback function pointer from the 'programmer_entry' struct.
This is a reasonable default for every other driver in the tree
with only a select few exceptions [atavia, serprog, dummyflasher
and internal].
Thus this simplifies driver development and paves way
to remove the 'programmer' global handle.
Change-Id: I5ea7bd68f7ae2cd4af9902ef07255ab6ce0bfdb3
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the bool type instead of an integer for the variable `have_device`,
since this represents its purpose much better.
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: Ia12f1503ae3f7be20a065f22b4ab84c4140cd23e
Reviewed-on: https://review.coreboot.org/c/flashrom/+/66878
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran;
```
$ find -name '*.c' -exec sed -i 's/extract_programmer_param_str(NULL/extract_programmer_param_str(cfg/g' '{}' \;
```
Manually fix i2c_helper_linux.c and other cases after.
Treat cases of;
- pcidev.c , and
- usb_device.c
as exceptional to be dealt with in later patches.
Change-Id: If7b7987e803d35582dda219652a6fc3ed5729b47
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/66656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify the type signature of each programmer entry-point
xxx_init() functions to allow for the consumption of the
programmer parameterisation string data.
```
$ find -name '*.c' -exec sed -i 's/_init(void)/_init(const char *prog_param)/g' '{}' \;
$ find -name '*.c' -exec sed -i 's/get_params(/get_params(const char *prog_param, /g' '{}' \;
$ find -name '*.c' -exec sed -i 's/const char \*prog_param)/const struct programmer_cfg *cfg)/g' '{}' \;
$ find -name '*.c' -exec sed -i 's/const char \*prog_param,/const struct programmer_cfg *cfg,/g' '{}' \;
```
and manually fix up any remaining parts.
Change-Id: I8bab51a635b9d3a43e1619a7a32b334f4ce2cdd2
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/66655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Results can be reproduced with the following invocation;
```
$ find -name '*.c' -exec sed -i 's/extract_programmer_param_str(/extract_programmer_param_str(NULL, /g' '{}' \;
```
This allows for a pointer to the actual programmer parameters
to be passed instead of a global.
Change-Id: I781a328fa280e0a9601050dd99a75af72c39c899
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/66654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a field, probe_opcode, to struct spi_master which points to a
function returning a bool by checking if a given command is supported by
the programmer in use. This is used for getting a whitelist of commands
supported by the programmer, as some programmers like ichspi don't
support all opcodes.
Most programmers use the default function, which just returns true.
ICHSPI and dummyflasher use their specialized function.
Change-Id: I6852ef92788221f471a859c879f8aff42558d36d
Signed-off-by: Aarya Chaumal <aarya.chaumal@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/65183
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch changes the function name of extract_programmer_param() to
extract_programmer_param_str() as this function name will clearly
specify that it returns the value of the given parameter as a string.
Signed-off-by: Chinmay Lonkar <chinmay20220@gmail.com>
Change-Id: Id7b9fff4d3e1de22abd31b8123a1d237cd0f5c97
Reviewed-on: https://review.coreboot.org/c/flashrom/+/65521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Thomas Heijligen <src@posteo.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use `<tab>.key<tab>*= <value>,`
TEST: `make VERSION=0 MAN_DATE=0` returns the same flashrom binary
before and after the patch
Change-Id: I1c45ea9804ca09e040d7ac98255042f58b01f8ef
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/65363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In function sp_stream_buffer_op, the variable parms might be NULL when
passed to memcpy. Although, since parmlen is also 0 at that time I
don't think it would make much difference. Still, add a NULL check
before calling memcpy to be safe.
Change-Id: I850123237e328f9548ba7f77a01888be2cbc9e7b
Signed-off-by: Aarya Chaumal <aarya.chaumal@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/62726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
| |
Replace the remaining IS_* macros with the associated compiler defines
Change-Id: Ia0f022d12390722816066d292e1878824adc613c
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/58280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the programmer specific code into serprog.c and remove its related
header file.
Change-Id: I5c65f43db200129489d487ff948daa08bd0e92fa
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/58300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch prepares spi masters to use new API which allows to
register shutdown function in spi_master struct. See also later
patch in this chain, where spi masters are converted to new API.
BUG=b:185191942
TEST=builds and ninja test
Comparing flashrom binary before and after the patch,
make clean && make CONFIG_EVERYTHING=yes VERSION=none
binary is the same
Change-Id: I50716686552b4ddcc6089d5afadb19ef59d9f9b4
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/56101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
| |
Change-Id: I3d02bd789f0299e936eb86819b3b15b5ea2bb921
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/52946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As per the coding style, if one branch of a conditional statement
needs braces, all other branches need to have braces as well.
BUG=b:185191942
TEST=builds
Change-Id: I4fdccbd66f0351af98811bf7c2d8e15f0a99d852
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Shutdown function was covering two different jobs here: 1) the actual
shutdown which is run at the end of the driver's lifecycle and
2) cleanup in cases when initialisation failed. Now, shutdown is only
doing its main job (#1), and the driver itself is doing cleanup
when init fails (#2).
The good thing is that now resources are released/closed immediately
in cases when init fails (vs shutdown function which was run at some
point later), and the driver leaves clean space after itself if init
fails.
And very importantly this unlocks API change which plans to move
register_shutdown inside register master API, see
https://review.coreboot.org/c/flashrom/+/51761
BUG=b:185191942
TEST=builds
Change-Id: Idf4ed62c19667e18cc807913180c48cb8c978805
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was impossible to register a const struct par_master that would
point to dynamically allocated `data`. Fix that so that we won't
have to create more mutable globals.
BUG=b:185191942
TEST=builds
Change-Id: I95bc92f6c54c5bcdac1c522ca87054aaffed0f40
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was impossible to register a const struct spi_master that would
point to dynamically allocated `data`. Fix that so that we won't
have to create more mutable globals.
Change-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reorder functions to avoid forward-declarations
BUG=b:140394053
TEST=builds
Change-Id: I6d05b2ad7b1a753aa752b22f9eb60a7b37dff641
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/50713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ChromiumOS flashrom fork has since const'ify flashctx
in a few places. This aligns the function signatures to
match with downstream to ease forward porting patches
out of downstream back into mainline flashrom.
This patch is minimum viable alignment and so feedback is
welcome.
Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Mostly by changing to `unsigned` types where applicable, sometimes
`signed` types, and casting as a last resort.
Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
|
|
|
|
|
|
|
|
| |
Not needed anymore. Drop it fast before it encourages anyone to
violate layers again!
Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
'else' is not needed after a 'break' or 'return'.
Change-Id: I9015020889c25ecbd391a18f56f99affc8ea307d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
|
|
|
|
|
|
| |
Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
| |
Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a feature flag SPI_MASTER_4BA to `struct spi_master` that advertises
programmer-side support for 4-byte addresses in generic commands (and
read/write commands if the master uses the default implementations). Set
it for all masters that handle commands address-agnostic.
Don't prefer native 4BA instructions if the master doesn't support them.
Change-Id: Ife66e3fc49b9716f9c99cad957095b528135ec2c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previous unnecessary page-by-page reading is repurposed to
read by big naturally aligned areas (now chip size limited
to 16MB for future-proofing of 4 byte addressed multi-die chips)
and serprog hack for continuous reads is removed.
Change-Id: Iadf909c9216578b1c5dacd4c4991bb436e32edc9
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: https://review.coreboot.org/20223
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASRock G31M-GS
Reported by Александр Трубицын
- ASRock G41M-VS3
Reported by Александр Трубицын
- ASRock N68C-S UCC
Reported by Alexey Belyaev
- ASRock AMCP7AION-HT (ION 330HT(-BD))
Reported by Stefan Tauner
- ASUS P5K SE
Reported by Александр Трубицын
- ASUS P5KPL-VM
Reported by Marin Vlah
- ASUS RAMPAGE III GENE
Reported by stevessss on IRC
- GIGABYTE GA-945GM-S2
Reported by Александр Трубицын
- GIGABYTE GA-945GCM-S2 (rev. 3.0)
Reported by Александр Трубицын
- GIGABYTE GA-965P-S3
Reported by Александр Трубицын
- GIGABYTE GA-EG43M-S2H
Reported by Александр Трубицын
- GIGABYTE GA-EP31-DS3L (rev. 1.0)
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2L
Reported by Александр Трубицын
- GIGABYTE GA-H55M-S2
Reported by Александр Трубицын
- GIGABYTE GA-J1900N-D3V
Reported by Marcos Truchado and Guillermo von Hünefeld
- GIGABYTE GA-K8NS
Reported by nicolae788
- GIGABYTE GA-M56S-S3
Reported by Estevo Paz Freire
- GIGABYTE GA-P31-DS3L
Reported by Александр Трубицын
- GIGABYTE GA-P31-S3G
Reported by Александр Трубицын
- MSI MS-7336
Reported by Benjamin Bellec
- MSI X79A-GD45 (8D) (MS-7760)"
Reported by mortehu on IRC
- Supermicro A1SAi-2550F
Reported by Bernard Grymonpon
- Supermicro X7DWT
Reported by Steven Stremciuc
Laptop:
- ASUS U38N
Reported by Ultra on IRC
- Dell Latitude D630
Reported by Márton Miklós
- Fujitsu Amilo Xi 3650
Reported by Elmar Stellnberger
- Lenovo T400 (whitelisting only)
Chipsets:
- Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
Reported by Jeremy Porter and Bernard Grymonpon
- Add Intel Sunrise Point IDs but no support yet.
Flash chips:
- Atmel AT45DB321D to PREW (+PREW)
Reported by The Raven
- Eon EN25QH32 to PREW (+PREW)
Reported by Josua Mayer
- Eon EN25QH64 to PREW (+EW)
Reported by David s. Alessio
- GigaDevice GD25LQ64(B) to PREW (+PREW)
Reported by Greg Tippit
- Intel 28F001BN/BX-T to PREW (+EW)
Reported by Lu Xie
- Micron M25P10-A to PREW (+W)
Reported by the Raven
- Micron M25PE40
Reported by David Wood
- Micron N25Q128..3E to PREW (+PREW)
Reported by Miklós Márton
- Macronix MX25L3273E to PREW (+PREW)
Reported by Roklobsta on IRC
- Macronix MX23L6454 to PR (+PR)
Reported by Steven Honeyman
- Macronix MX25U6435E/F to PREW (+PREW)
Reported by Marcos Truchado and Guillermo von Hünefeld
- PMC Pm25LQ032C to PREW (+EW)
Reported by Dirk Knop
- Spansion S25FL016A to PREW (+EW)
Reported by Márton Miklós
- Spansion S25FL128S......0 to PREW (+PREW)
Reported by Jim Houston
- Spansion S25FL204K to PR (+PR)
Reported by Thomas Debrunner
- SST SST49LF016C to PREW (+EW)
Reported by Steven Stremciuc
- SST SST39VF040 to PREW (+PREW)
Reported by Xavier Bourgeois
- SST SST49LF040B to PREW (+EW)
Reported by Rikard Åhlund
- ST M25P10-A to PREW (+W)
Reported by Martijn Schiedon
- Winbond W39V040FA to PREW (+EW)
Reported by Евгений Черкашин
- Winbond W39V080FA to PREW (+EW)
Reported by protagonist0 on IRC
- Winbond W25Q80.W to PREW (+PREW)
Reported by Miklós Márton
- Winbond W25X64 to PREW (+REW)
Reported by Johannes Krampf and Manuel Dejonghe
- Fix ID of AMIC A25LQ64
Reported by Roman Titov
- Fix page size of Spansion S25FL129P......1
Copy and paste error from the 128S uniform 256kB variant, probably.
- Add Micron/Numonyx phase-change memory IDs
Miscellaneous:
- Detect Android target OS.
No changes are required to build flashrom (excluding programmers
with NEED_PCI) on Android.
- Update rayerspi (spipgm) URL
- Fix max_data_write handling of at45db.
- Minor refinement of the README
- Mark board enable for the GA-K8NS variants as tested.
Tested by "nicolae788" on a board with socket 754.
- Mark "Multi-system" chassis as non-laptop case.
- Remove W836xx log requests.
We got enough (and no one is looking at them for the time being anyway).
- serprog: improve invalid reply error message, contributed by Urja Rannikko.
- Remove default include paths for MinGW.
- Disable implicit rules in the Makefile because we don't need them and they
just make the build (imperceptibly) slower.
- Enable our own strnlen() implementation not only on DJGPP but also if
HAVE_STRNLEN is not defined. This is needed to get older BSDs
(e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
- Tiny other stuff.
Corresponding to flashrom svn r1917.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, flashrom -p serprog didnt notice a completely missing dev=
string on Windows. Also, the error message shown if no device name
followed contained a misleading "/dev/...".
Corresponding to flashrom svn r1908.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
On USB-based serial connections (VCP) the requested baud rate usually
does not matter (much). Remove the arbitrary restriction and use whatever
default values the OS/hardware provides.
Corresponding to flashrom svn r1907.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The serprog protocol does only transmit 24 bit-wide address and ignores the
top 8 bit. This is fine as long as the underlying hardware ignores the latter
anyway (which is the case for parallel chips that even lack the respective pins).
FWH/LPC chips, however, operate on a full 32-bit (LPC) or 28-bit (FWH) address
space and would fail with the fallback mapping to NULL.
Corresponding to flashrom svn r1895.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We do CPU architecture checks once for the makefile in arch.h and
once for HW access abstraction in hwaccess.c. This patch unifies
related files so that they can share the checks to improve
maintainability and reduce the chance of inconsistencies.
Furthermore, it refines some of the definitions, which
- adds "support" for AARCH64 and PPC64,
- adds big-endian handling on arm as well as LE handling on PPC64,
- fixes compilation of internal.c on AARCH64 and PPC64.
Additionally, this patch continues to unify all OS checks in
flashrom by adding a new helper macro IS_WINDOWS.
The old header file for architecture checking is renamed to platform.h
to reflect its broader scope and all new macros are add in there.
Corresponding to flashrom svn r1864.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is no reason for negative delays in our use cases:
- We don't need it (to work around any quirks).
- sleep() (POSIX) uses an unsigned argument.
- usleep() (POSIX) uses an unsigned argument.
- Sleep() (Windows) uses an unsigned argument.
Change all callees as well (without any complications).
Corresponding to flashrom svn r1782.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1777.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1775.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1723.
Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Add return values to sp_flush_stream(), sp_pass_writen(),
sp_execute_opbuf(), sp_execute_opbuf_noflush(),
sp_check_opbuf_usage(), sp_do_read_n().
- Use those return values to propagate errors instead of exiting.
In some places this has to wait for core API changes (error handling for
chip_readb, chip_readn, chip_write) hence comments are added instead.
Corresponding to flashrom svn r1719.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASUS C60M1-I
http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html
- ASUS P8H77-I
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- ASUS P8H77-M
http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html
- ASUS P8P67 LE (B2)
http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html
- Elitegroup GeForce6100PM-M2 (V3.0)
http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html
- GIGABYTE GA-P55A-UD7
http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html
- MSI B75MA-E33 (MS-7808)
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- MSI H77MA-G43 (MS-7756)
http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html
- MSI KA780G (MS-7551)
http://paste.flashrom.org/view.php?id=1617
- SAPPHIRE IPC-E350M1
Reported by xvilka on IRC
- Supermicro X8DTG-D
http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html
NOT OK:
- ASRock Fatal1ty Z77 Performance
http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html
- ASRock Z68 Extreme4
http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html
- ASUS P8B75-M LE
http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html
- ASUS P8P67-M PRO
http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html
- ASUS P8Z68-V LE
http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html
- Intel DQ77MK
http://paste.flashrom.org/view.php?id=1603
- Supermicro X9DRD-7LN4F
http://paste.flashrom.org/view.php?id=1582
- Supermicro X9SCE-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html
- Supermicro X9SCM-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html
- Tyan S7066
http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html
Chipsets:
- Marked Intel B75 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- Marked Intel H77 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- Removed 10de:03e2 because it is apparently the MCP61 host bridge.
It was reclassified to Host Bridge in the PCI device ID database and there
is at least one report suggesting this configuration too:
http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html
- Added MCP89 which hopefully works with the code for previous versions.
Thanks to James Laird for submitting this change.
Tested flash chips:
- Atmel AT25DF641(A) to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html
- Atmel AT25F512 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html
Also, change its ID according to Modification of PCN SC040401A:
"There has been a change in the returned value of the Product Identification
(RDID) command, the AT25F512A RDID code is 65h compared to 60h from
the AT25F512 product."
It seems to be quite likely that all AT25F512 are fully functional relabeled
AT25F1024 chips. There are even some hints in the datasheet:
in table 6 they stress that address pin 16 needs to be low under all circum-
stances; while continuous reads can wrap around on the AT25F1024 the DS
notes "For the AT25F512, the read command must be terminated when the
highest address (00FFFF) is reached." OTOH the lock bit semantics are
different, but this has not been tested thoroughly
- Atmel AT25F512A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1569
- Eon EN25F05 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1571
- Macronix MX25L12805(D) to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html
- Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P)
Tested by Stefan Tauner
- Micron/Numonyx/ST M25PX80 to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P)
Tested by Stefan Tauner
- SST SST25VF040B to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1574
- SST SST25VF040B.REMS to PREW (+EW)
http://paste.flashrom.org/view.php?id=1575
- ST M25P05-A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1576
- ST M29W512B to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html
- Winbond W25Q64.W to PREW (+PREW)
Tested by the chromiumos guys.
- Winbond W25Q128.V to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html
- Winbond W25X20 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html
Miscellaneous:
- Add Lenovo X201 to the laptop whitelist.
- Add chip IDs for the ESMT F25L..QA family.
- Add chip IDs for a few Macronix MX25 models.
- The list of flashchips is not sorted strictly alphabetically and should not be
either. Refine the comment explaining the scheme on top of the list.
- Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb).
- Use z length modifier in (more) prints for size_t types.
- Remove chips >16MB again because our current implementation of memory mapping
the flash chip violates common rules by mapping a window as large as the chip.
This leads to failing mmaps as can be seen here:
http://paste.flashrom.org/view.php?id=1695
- Document spispeed parameter of linux_spi (and fix some leaks).
- Rephrase the "multiple chips detected" message because it was confusing.
- Skip verification step if the image is equal to the flash contents.
- Tiny other stuff.
Corresponding to flashrom svn r1702.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1698.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sockets are not ported (yet).
Tested on Windows 7 with my Atmega32U2 serprog implementation.
http://paste.flashrom.org/view.php?id=1566
Corresponding to flashrom svn r1665.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
Read(), write(), usleep() are replaced.
Corresponding to flashrom svn r1663.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the write part.
This allows to get rid of the explicit temporary disabling of blocking I/O in
serprog's sp_synchronize().
Corresponding to flashrom svn r1662.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the read part.
It stores the current blocking properties before disabling blocking and
restores them after reading. The timeout is implemented as previously
by retrying every millisecond until the timeout is reached or enough
characters are available.
Corresponding to flashrom svn r1661.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested Mainboards:
OK:
- Acer V75-M (used in IBM Aptiva 2170-G
http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html
- ASRock 4CoreDual-VSTA with W39V040FB
http://paste.flashrom.org/view.php?id=1446
- ASRock 775Dual-VSTA
http://www.flashrom.org/pipermail/flashrom/2012-December/010294.html
- ASRock E350M1/USB3
http://paste.flashrom.org/view.php?id=1465
- ASUS P5B-VM
http://www.flashrom.org/pipermail/flashrom/2012-December/010351.html
- ASUS SABERTOOTH 990FX R2.0
http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html
- Elitegroup A928 (including a laptop whitelist board enable)
http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html
- EVGA 122-CK-NF68
Reported by Stephanie Daugherty on IRC
http://paste.flashrom.org/view.php?id=1431
- GIGABYTE GA-A75M-UD2H
Reported by Soul_keeper on IRC
http://paste.flashrom.org/view.php?id=1490
- Intel D945GCNL
Add board enable to override laptop detection too.
http://www.flashrom.org/pipermail/flashrom/2012-December/010276.html
- MSI G33M (MS-7357)
http://www.flashrom.org/pipermail/flashrom/2012-October/010056.html
- Shuttle FB61
http://www.flashrom.org/pipermail/flashrom/2012-November/010105.html
- Tyan S4882 (Thunder K8QS Pro)
Reported on IRC
NOT OK:
Alienware Aurora-R2
http://www.flashrom.org/pipermail/flashrom/2012-December/010225.html
Biostar H61MU3
http://www.flashrom.org/pipermail/flashrom/2012-November/010144.html
Dell OptiPlex 7010
http://paste.flashrom.org/view.php?id=1481
Intel DH67CL
http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html
Supermicro X9DRT-HF+
http://www.flashrom.org/pipermail/flashrom/2012-November/010155.html
Supermicro X9DRW
http://www.flashrom.org/pipermail/flashrom/2012-November/010150.html
Tested flash chips:
- Atmel AT25FS010 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1484
- Eon EN25F64 to PREW (+EW)
http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html
- Spansion S25FL032A/P to PREW (+EW)
http://paste.flashrom.org/view.php?id=1510
- ST M29F002T/NT to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html
- Winbond W25X10 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1486
Tested chipsets:
- NVIDIA MCP78S http://www.flashrom.org/pipermail/flashrom/2012-November/010176.html
- SiS 650 http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html
Miscellaneous:
- Typo in GA-X58A-UDR3 (correct is GA-X58A-UD3R).
- Force 2-digit hex numbers in prints were it makes sense.
- Share code between enable_flash_sis530() and enable_flash_sis540().
- Some SST 25 series chips support both WRSR enable commands...
- S25FL032A and S25FL064A share the IDs with their P versions, so rename them.
- Fix a few memleaks in serprog.
- Dediprog uses UINT_MAX so include limits.h (fixes the Windows build of dediprog)
- Add (another) hint regarding the mandatory -p parameter to the manpage
to make Debian bug #690478 happy.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690478
- Fix whitespace issues.
- On shutdown, reset count of registered programmers (by Nico Huber)
- Fix atahpt.c shutdown.
The order of pcidev_init, register_shutdown and rpci_write_* is important!
Thanks to Roy for reporting the problem and testing the fix.
Corresponding to flashrom svn r1640.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|