aboutsummaryrefslogtreecommitdiffstats
path: root/spi.h
Commit message (Collapse)AuthorAgeFilesLines
* Add paranoid checks to sb600spi driverCarl-Daniel Hailfinger2010-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | Add paranoid checks for correct values in essential registers in the SB600/SB700/... SPI driver. If something else changes the values we wrote, we will see severe read/write corruption. sb600spi will now abort the access and return an error if it detects this sort of corruption. Note: This corruption can be caused by a few different events: - IPMI/BMC/IMC accesses flash - Other software accesses flash The nature of flash access (read/write/ID/...) is irrelevant. Each such access will cause corruption for all other accesses happening at the same time. Thanks to Matthias Kretz for testing this patch. Corresponding to flashrom svn r1145. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Matthias Kretz <kretz@kde.org>
* Fix bug introduced in AAI code rewrite (r1052)Carl-Daniel Hailfinger2010-07-291-5/+5
| | | | | | | | | | | | The AAI code rewrite in r1052 introduced a bug: The writelen of AAI continuation is 3 bytes, but the code incorrectly had 6 bytes there. This causes all AAI writes (except the first two bytes of a chip) to fail. Thanks to den_m for reporting the bug and for testing the fix. Corresponding to flashrom svn r1121. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add detailed status register printing and unlocking for all ATMEL AT25* chipsCarl-Daniel Hailfinger2010-07-291-1/+2
| | | | | | | | | | | | | | Add support for Atmel AT25DF081A and AT25DQ161. Some chips require EWSR before WRSR, others require WREN before WRSR, and some support both variants. Add feature_bits to select the correct SPI command, and default to EWSR. Corresponding to flashrom svn r1115. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Steven Rosario Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refine SPI AAI supportCarl-Daniel Hailfinger2010-06-201-0/+6
| | | | | | | | | | | Modernize SPI AAI code, blacklist IT87 SPI for AAI, allow AAI to run without warnings on ICH/VIA SPI. Add some code to make conversion to partial write possible for AAI. Corresponding to flashrom svn r1052. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Add support for two-byte RES probesCarl-Daniel Hailfinger2010-05-281-0/+2
| | | | | | | | | | | | Some chips implement the RES (0xab) opcode, but they use a non-standard two byte response instead of the usual one byte response. A two-byte response has the accuracy of REMS and RDID, so don't check for REMS/RDID availability before running a two-byte RES. Corresponding to flashrom svn r1017. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Block eraser conversions and support for Eon EN25B seriesSean Nelson2010-01-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Convert chips to block_erasers: ST_M25PE10 ST_M25PE20 ST_M25PE40 ST_M25PE80 ST_M25PE16 PMC_25LV010 PMC_25LV016B PMC_25LV020 PMC_25LV040 PMC_25LV080B PMC_25LV512 PMC_39F010 PMC_49FL002 PMC_49FL004 SANYO_LE25FW203A SPANSION_S25FL016A Added spi_block_erase_d7 for PMC chips. Corresponding to flashrom svn r867. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Cleanly validate ICH SPI preopcodesCarl-Daniel Hailfinger2009-11-241-0/+1
| | | | | | | | | | | | | | | | | | | The code should work on Linux/*BSD/MacOSX and relies on the serial code implementation in serial.c. Support for additional platforms (Windows) will have to be added to serial.c for this to work. For tests without a Bus Pirate (or with non-functional serial code) it is possible to #define FAKE_COMMUNICATION in buspirate_spi.c. Thanks to Sean Nelson for the SPI mode settings code. I tweaked it a bit to make configuration from a commandline easier should anybody want that feature. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r772. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use a distinct return code for SPI commands with unsupported/invalid lengthCarl-Daniel Hailfinger2009-07-141-0/+1
| | | | | | | | | | | Some drivers support only a few combinations of read/write length and return error otherwise. Having a distinct return code for this error means we can handle it in upper layers. Corresponding to flashrom svn r653. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* There are various reasons why a SPI command can failCarl-Daniel Hailfinger2009-05-131-0/+4
| | | | | | | | | | | | | | | | | | | | | Among others, I have seen the following problems: - The SPI opcode is not supported by the controller. ICH-style controllers exhibit this if SPI config is locked down. - The address in in a prohibited area. This can happen on ICH for any access (BBAR) and for writes in chipset write protected areas. - There is no SPI controller. Introduce separate error codes for unsupported opcode and prohibited address. Add the ability to adjust REMS and RES addresses to the minium supported read address with the help of spi_get_valid_read_addr(). That function needs to call SPI controller specific functions like reading BBAR on ICH. Corresponding to flashrom svn r500. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Declare special commands to support the Atmel AT25F512ACarl-Daniel Hailfinger2008-11-281-0/+5
| | | | | | | Corresponding to flashrom svn r353 and coreboot v2 svn r3781. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the AMD/ATI SB600 southbridge SPI functionalityJason Wang2008-11-281-0/+5
| | | | | | | | | | This has been tested by Uwe Hermann on an RS690/SB600 board. Corresponding to flashrom svn r351 and coreboot v2 svn r3779. Signed-off-by: Jason Wang <Qingpei.Wang@amd.com> Reviewed-by: Joe Bao <zheng.bao@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Flashrom already has the following probe functionsCarl-Daniel Hailfinger2008-11-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | - probe_spi_rdid with opcode 0x9f, usually 3 bytes ID - probe_spi_res with opcode 0xab, usually 1 byte ID We are missing the following probe function: - probe_spi_rems with opcode 0x90, usually 2 bytes ID RDID provides best specifity (manufacturer, device class and device) and RES is supported by quite a few old chips. However, RES only returns one byte and there are multiple flash chips with different sizes on the market and all of them have the same RES ID. REMS is from the same age as RES, but it provides a manufacturer and a device ID. It is therefore on par with the probing for parallel flash chips and specific enough. The order in which chips should be detected is as follows: 1. RDID 2. REMS 3. RES Corresponding to flashrom svn r349 and coreboot v2 svn r3775. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* The AT25 and AT26 series SPI chips from Atmel are plain EEPROMsCarl-Daniel Hailfinger2008-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT45 series SPI chips are DataFlash EEPROMs which means they have odd (non-power-of-two) sector sizes, but some of the DataFlash chips can be configured or ordered with power-of-two sector sizes. Add probe support for the following Atmel SPI chips: AT25DF021 AT25DF041A AT25DF081 AT25DF161 AT25DF321A AT25DF641 AT25F512B AT25FS010 AT25FS040 AT26DF041 AT26DF081A AT26DF161 AT26DF161A AT26DF321 AT26F004 AT45CS1282 AT45DB011D AT45DB021D AT45DB041D AT45DB081D AT45DB161D AT45DB321C AT45DB321D AT45DB642D Add an explanation why the following chips can't be probed: AT45BR3214B AT45D011 AT45D021A AT45D041A AT45D081A AT45D161 AT45DB011 AT45DB011B AT45DB021A AT45DB021B AT45DB041A AT45DB081A AT45DB161 AT45DB161B AT45DB321 AT45DB321B AT45DB642 Add the ID, but no probing function for this chip: AT25F512A Corresponding to flashrom svn r342 and coreboot v2 svn r3754. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andriy Gapon <avg@icyb.net.ua> Acked-by: Myles Watson <mylesgw@gmail.com>
* Trivial SPI cleanupsPeter Stuge2008-07-071-1/+1
| | | | | | | | | | | | | | | | | While writing a new SPI driver I fixed some things in the SPI code: All calls to spi_command() had unneccessary #define duplications, and in some cases the read count define could theoretically become harmful because NULL was passed for the read buffer. Avoid a crash, should someone change the #defines. I also noticed that the only caller of spi_page_program() was the it87 driver, and spi_page_program() could only call back into the it87 driver. Removed the function for easier-to-follow code and made it8716f_spi_page_program() static. The ichspi driver's static page functions are already static. Corresponding to flashrom svn r302 and coreboot v2 svn r3418. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Add support for the JEDEC RESCarl-Daniel Hailfinger2008-05-151-0/+5
| | | | | | | | | | | | | | | | | | Add support for the JEDEC RES (Read Electronic Signature and Resume from Powerdown) SPI command to identify older SPI chips which can't handle JEDEC RDID. Since RES gives a one-byte identifier which is shared among many different vendors and even different sizes, we want to match RES as a last resort if RDID returns 0xff 0xff 0xff. Corresponding to flashrom svn r235 and coreboot v2 svn r3320. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> This is a heavily reworked version of a patch by Fredrik Tolf, which was Signed-off-by: Fredrik Tolf <fredrik@dolda2000.com>
* Move the SPI #defines from spi.c to spi.hCarl-Daniel Hailfinger2008-05-131-0/+88
This patch has no code changes. Corresponding to flashrom svn r228 and coreboot v2 svn r3302. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:04:18 +0000