aboutsummaryrefslogtreecommitdiffstats
path: root/util
Commit message (Collapse)AuthorAgeFilesLines
...
* Refine revision handlingStefan Tauner2015-01-101-0/+10
| | | | | | | | | | | | | Up to now, when compiling flashrom outside a VCS it would print two warnings that are not very clear to the user. This patch adds a new auxilary function to getrevision.sh and uses it in the makefile to print a single and more meaningful message to the user while hiding the warnings from getrevision.sh. Corresponding to flashrom svn r1862. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel Wildcat Point PCHDuncan Laurie2014-08-201-0/+4
| | | | | | | | | | | The Wildcat Point PCH can be paired with Broadwell or Haswell. This patch was essentially backported from ChromiumOS commit 9bd2af8. Corresponding to flashrom svn r1845. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel Silvermont: Bay Trail, Rangeley and AvotonDuncan Laurie2014-08-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | The core of this patch to support Bay Trail originally came from the Chromiumos flashrom repo and was modified by Sage to support the Rangeley/Avoton parts as well. Because that was not complicated enough already Stefan Tauner refactored and refined everything. Bay Trail seems to be the first Atom SoC able to support hwseq. No SPI Programming Guide could be obtained so it is handled similarly to Lynx Point which seems to be its nearest relative. Corresponding to flashrom svn r1844. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Marc Jones <marcj303@gmail.com> Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Thomas Reardon <thomas_reardon@hotmail.com> Tested-by: Wen Wang <wen.wang@adiengineering.com> Acked-by: Marc Jones <marcj303@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine Flash Component descriptor handlingStefan Tauner2014-08-201-1/+5
| | | | | | | | | | | | | | | Possible values as well as encodings have changed in newer chipsets as follows. - Pre-PCH (i.e. ICH) chipsets had a maximum frequency of 33 MHz for all operations - Since Cougar Point the chipsets support dual output fast reads (encoded in bit 30). - Flash component density encoding has changed from 3 to 4 bits with Lynx Point, currently allowing for up to 64 MB chips. Corresponding to flashrom svn r1843. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 20Stefan Tauner2014-05-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Corresponding to flashrom svn r1783. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: Add support for TUMPA LiteStefan Tauner2014-04-271-0/+4
| | | | | | | | | | | http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual Initial patch from Jadran Puharic <jpuharic@gmail.com>. Corresponding to flashrom svn r1781. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* CID1130011: Use after free in ich_descriptor_toolStefan Reinauer2014-04-261-1/+2
| | | | | | | Corresponding to flashrom svn r1771. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* BSD refinementsStefan Tauner2013-09-121-6/+34
| | | | | | | | | | | | | | | Make it easier to compile flashrom under NetBSD and DragonFlyBSD: - Use /usr/pkg/ as prefix for includes and linking - Use pciutils as include path for the right(tm) libpci Also, fix date handling in getrevision.sh to work with the various formats for invoking 'date'. This also uses svn's info --xml output instead of the regular one. Corresponding to flashrom svn r1742. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve getrevision.shStefan Tauner2013-08-291-148/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - remove bashism. - simplify some git-related code. - improved parameter and error handling. - additional -d/--date action which is similar to the timestamp action. - support for an optional path parameter. - there is only one sane time format. - and only one sane date format too. - use UTC dates and times only. - vastly improve git_url() to print the correct remote url and "nearest" branch. - remove username from repository URLs. - add "-dirty" to local revisions if there are uncommitted changes. - indicate in local revisions how many git-only commits were done since branching from upstream svn. - fix svn_revision() fallback to svn info and remove git-svn. - print leading r in script instead of hardcode it in the makefile; no more "0.9.7-runknown". - make retrieving the upstream revision work even in cloned git-svn repositories. - more abstractions and helper functions. - less fragmentation of actual functionality. Corresponding to flashrom svn r1727. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* getrevision.sh: Make sure we don't get translated outputJoerg Mayer2013-08-171-8/+10
| | | | | | | | | (And explicitly require bash.) Corresponding to flashrom svn r1716. Signed-off-by: Joerg Mayer <jmayer@loplof.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add getrevision.sh utility scriptDavid Hendricks2013-08-141-0/+228
| | | | | | | | | | | | This allows to retrieve various data from SCM systems (git and svn) and use them in the build process to better indicate which source was used. For now only use it for the upstream (i.e. svn) revision number, which was previously implemented by an awful line in the Makefile. Corresponding to flashrom svn r1713. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add utility to print all chip names in flashchips.h that are not in flashchips.cStefan Tauner2013-03-091-0/+23
| | | | | | | | | | | | | | | This allows to list yet unsupported chips easily. First it tries to find the directory containing the files, then it uses sed to extract the macro names of chips from flashchips.h, greps for them in flashchips.c and prints it if it is not found. If verbose mode is activated by giving at least one additional parameter it prints the chip ID and comment following the macro definition too. Corresponding to flashrom svn r1654. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow specifying CPPFLAGSCarl-Daniel Hailfinger2012-08-151-6/+6
| | | | | | | | | | | | The user may know better which CFLAGS/CPPFLAGS are appropriate. Use flashrom_CFLAGS for flags which flashrom definitely needs to build. Thanks to Stefan Tauner for pointing out the flaw in r1574. Corresponding to flashrom svn r1575. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Allow the user to specify CFLAGS without breaking the buildCarl-Daniel Hailfinger2012-08-141-8/+23
| | | | | | | | | | | | | | | | | | | GNU make has a very interesting quirk: If you set a variable on the command line, any changes to that variable in the Makefile are ignored unless marked with the "override" keyword. Use CFLAGS only for optimization and warning options, and use CPPFLAGS for the dependency and other preprocessor related options. That way packagers can specify their own CFLAGS without breaking the build. As a side benefit, the ich_descriptors_tool Makefile now behaves exactly the same whether called standalone or as part of the main Makefile. Corresponding to flashrom svn r1574. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Clean up ICH descriptor codeStefan Tauner2012-08-131-12/+9
| | | | | | | | | | - allows for compilation with -Werror=shadow, - use extended line limit to fix the most awful line breaks. Corresponding to flashrom svn r1570. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Portability fixes and cleanupsCarl-Daniel Hailfinger2012-08-092-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move Mac OS X IOKit/DirectHW availability checks in the Makefile from compiler check to pciutils check. Print the compiler error messages for feature detection. Add DOS libpci in the Makefile includes only if a PCI-based programmer was requested. Restrict mmap usage in ich_descriptors_tool to Unix style systems. Build ich_descriptors_tool with the correct .exe extension on DOS/Windows. Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner) Print the Windows version instead of "unknown machine" on Windows. Don't #define our own __DARWIN__, use the standard OS X detection method. Update the README. Add more generated files to svn:ignore Corresponding to flashrom svn r1567. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add ich_descriptor_tool to decode all flash descriptors stored in a flash ↵Stefan Tauner2011-12-243-0/+279
| | | | | | | | | | | | | | | | | | | | | | | | | | | | dump file This patch adds an external utility that shares most of the existing descriptor decoding source code. Additionally to what is available via FDOC/FDOD this allows to access: - the softstraps which are used to configure the chipset by flash content without the need for BIOS routines. on ICH8 it is possible to read those with FDOC/FDOC too, but this was removed in later chipsets. - the ME VSCC (Vendor Specific Component Capabilities) table. simply put, this is an SPI chip database used to figure out the flash's capabilities. - the MAC address stored in the GbE image. Intel thinks this information should be confidential for ICH9 and up, but references some tidbits in their public documentation. This patch includes the human-readable information for ICH8, Ibex Peak (5 series) and Cougar Point (6 series); the latter two were obtained from leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9 and 10 is unknown to us yet. It can probably found in: "Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide" Information regarding the upcoming Panther Point chipset is also not included. Corresponding to flashrom svn r1480. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Matthias Wenzel <bios@mazzoo.de>
* Add support for the GOEPEL PicoTAP programmerSamir Ibradžić2011-10-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://www.goepel.com/en/jtagboundary-scan/hardware/picotap.html This device is actually a JTAG adapter, but since it uses standard FT2232 A interface pins, it can be easily used as SPI programmer (tested it here successfully). PicoTAP supports only 5V output, so one needs to reduce this to 3.3V in a same manner as DLP Design DLP-USB1232H, see http://flashrom.org/FT2232SPI_Programmer#DLP_Design_DLP-USB1232H for details. The PicoTAP pin-out is as follows: PicoTAP | SPI ---------+------- TCK | SCLK TMS | CS# TDI | SO TDO | SI /TRST | - GND | GND +5V | VCC, HOLD# & WP# after 3.3V regulator I managed to run PicoTAP in 10MHz, 15MHz and 30MHz modes (by forcing DIVIDE_BY), against SST25VF016B SPI flash, read/write/erase all worked fine (write seems somewhat slow). Corresponding to flashrom svn r1453. Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) supportUwe Hermann2011-10-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to TIAO/DIYGADGET for sponsoring a test device! This is an FTDI FT2232H based device which provides an easily accessible JTAG, SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips using flashrom. http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1 There are two SPI connectors (pin headers) on the board: SPI1, which is connected to the FT2232H's A interface, and SPI2, which is connected to the chip's B interface. Both can be used to flash SPI chips: flashrom -p ft2232_spi:type=tumpa,port=A flashrom -p ft2232_spi:type=tumpa,port=B The default interface is A, so for SPI1 you can also just write: flashrom -p ft2232_spi:type=tumpa I tested all operations on both interfaces, everything works fine. Corresponding to flashrom svn r1451. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Update the flashrom udev rules file with new programmersUwe Hermann2011-06-171-0/+20
| | | | | | | | | | | | | | | Add the following missing USB devices: - FIC OpenMoko Neo1973 Debug board (V2+) - Olimex ARM-USB-OCD - Olimex ARM-USB-OCD-H - Olimex ARM-USB-TINY - Olimex ARM-USB-TINY-H Corresponding to flashrom svn r1340. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Whitespace, documentation and other small stuffStefan Tauner2011-05-191-3/+3
| | | | | | | | | | | | | This patch combines three previously posted patches in a revised form. one is even stolen from Stefan Reinauer (remove umlauts from man page). Corresponding to flashrom svn r1317. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a line of output for each iteration of the torture testDavid Hendricks2010-11-021-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | This serves as a sort of progress indicator. The output looks like this:: localhost ~ # flashrom="./flashrom" sh flashrom_partial_write_test.sh testing flashrom binary: ./flashrom Running test in /tmp/tmp.4xPejwaADU ffh pattern written in ff_4k.bin 00h pattern written in 00_4k.bin Reading BIOS image Original image saved as bios.bin aligned region 0 test: passed ... aligned region 15 test: passed unaligned region 0 test: passed ... unaligned region 15 test: passed Result: PASSED restoring original bios image using system's flashrom test files remain in /tmp/tmp.4xPejwaADU Corresponding to flashrom svn r1222. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use mktemp unconditionally for security reasonsCarl-Daniel Hailfinger2010-11-021-3/+9
| | | | | | | | | Avoid non-portable seq. Corresponding to flashrom svn r1221. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Replace "$FLASHROM_PARAM" with ${FLASHROM_PARAM} in ↵David Hendricks2010-10-291-7/+7
| | | | | | | | | | | | | | util/flashrom_partial_write_test.sh Replace "$flashrom_PARAM" with ${FLASHROM_PARAM} in util/flashrom_partial_write_test.sh to avoid passing in quoted parameters which can cause problems especially if flashrom_PARAM is empty or contains spaces. Corresponding to flashrom svn r1219. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Flashrom torture test scriptDavid Hendricks2010-10-291-0/+281
| | | | | | | | | | | Focus is on partial write and layout functionality. Minor modifications by Carl-Daniel Hailfinger. Corresponding to flashrom svn r1218. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a udev rules file for flashromUwe Hermann2010-07-271-0/+55
This allows USB-based external programmers to be used by non-root users (which are in the 'plugdev' group). The file is to be installed by the distros into the proper place (not sure if this is distro-specific). On Debian the file will end up in /etc/udev/rules.d/z60_flashrom.rules. On some systems the 'plugdev' group might have to adapted to whatever the respective distro uses. The following devices are listed so far: - Amontec JTAGkey(2) - Buspirate - Dediprog SF100 - DLP Design DLP-USB1232H - FTDI FT4232H Mini-Module Corresponding to flashrom svn r1110. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>