aboutsummaryrefslogtreecommitdiffstats
path: root/wbsio_spi.c
Commit message (Collapse)AuthorAgeFilesLines
* Fix -Wsign-compare troubleNico Huber2019-07-311-1/+1
| | | | | | | | | | | Mostly by changing to `unsigned` types where applicable, sometimes `signed` types, and casting as a last resort. Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
* spi: Drop spi_controller typeNico Huber2019-06-271-1/+0
| | | | | | | | | | Not needed anymore. Drop it fast before it encourages anyone to violate layers again! Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651 Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* spi25: Fix layering violation in default_spi_write_aai()Nico Huber2019-06-211-1/+1
| | | | | | | | Change-Id: I8aa3e2992f64906edc669060936f9522d32637fb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-2/+2
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Hide hwaccess.h from public APIPatrick Georgi2012-07-201-0/+1
| | | | | | | | | | | | | Move hwaccess.h #include from flash.h to individual drivers. libflashrom users need flash.h, but they do not care about hwaccess.h and should not see its definitions because they may conflict with other hardware access functions and #defines used by the libflashrom user. Corresponding to flashrom svn r1549. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+1
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix parallel-style programmer access from ITE IT87/Winbond W83627 SPICarl-Daniel Hailfinger2012-03-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The ITE IT87 SPI driver uses a trick to speed up reading and writing: If a flash chip is 512 kByte or less, the flash chip can be completely mapped in memory and both read and write accesses are faster that way. The current IT87 SPI code did use the parallel programmer interface for memory mapped reads and writes, but that's the wrong abstraction. It has been fixed to use mmio_read*/mmio_write* for that purpose. The Winbond W83627 SPI driver uses the same trick in its read path for all supported chip sizes. Fix it the same way. Switch internal_chip_readn to use mmio_readn as proper abstraction. Kudos to Michael Karcher for spotting the bugs. Tested-by: Johan Svensson <flashrom.js@crypt.se> Corresponding to flashrom svn r1511. Reported-by: Johan Svensson <flashrom.js@crypt.se> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-6/+12
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | Struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Corresponding to flashrom svn r1473. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-2/+2
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Register Parallel/LPC/FWH programmers the same way SPI programmers are ↵Carl-Daniel Hailfinger2011-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | registered All programmers are now calling programmer registration functions and direct manipulations of buses_supported are not needed/possible anymore. Note: Programmers without parallel/LPC/FWH chip support should not call register_par_programmer(). Additional fixes: Set max_rom_decode.parallel for drkaiser. Remove abuse of programmer_map_flash_region in it85spi. Annotate several FIXMEs in it85spi. Corresponding to flashrom svn r1463. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | - probe_timing was changed to unsigned although we use negative values for special cases - some code was not changed along hence did no longer compile: * dediprog's read and write functions * linux_spi's read and write functions - it introduced a number of new sign conversion warnings (http://paste.flashrom.org/view.php?id=832) To be safe this patch reverts all changes made in r1448, a corrected patch will follow later. Thanks to idwer for pointing out the problem first! Corresponding to flashrom svn r1450. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-2/+2
| | | | | | | Corresponding to flashrom svn r1448. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Whitespace, documentation and other small stuffStefan Tauner2011-05-191-1/+1
| | | | | | | | | | | | | This patch combines three previously posted patches in a revised form. one is even stolen from Stefan Reinauer (remove umlauts from man page). Corresponding to flashrom svn r1317. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Kill central list of SPI programmersMichael Karcher2011-05-111-4/+17
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use the max_rom_decode infrastructure for wbsio_spiCarl-Daniel Hailfinger2010-07-141-17/+3
| | | | | | | | | Use this instead of the open-coding variant that only aborts after it is too late. Corresponding to flashrom svn r1081. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-5/+3
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* board_enable.c: Remove useless 'name' parameterUwe Hermann2010-06-071-1/+1
| | | | | | | | | | | | Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it. Corresponding to flashrom svn r1037. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-1/+0
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Convert all messages in wbsio_spi.c to the new message infrastructureSean Nelson2010-01-091-35/+24
| | | | | | | Corresponding to flashrom svn r847. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Allow one to disable programmer debug messages at compile timeCarl-Daniel Hailfinger2010-01-071-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Programmer debug messages during programmer init/shutdown are useful because they print hardware settings and desired configuration. They help in getting a quick overview of hardware and software state on startup and shutdown. Programmer debug messages during flash chip access are mostly a distraction in logs and should only be enabled if someone is having problems which are suspected to stem from a programmer hardware or programmer software bug. Disable those messages by default, they can be reenabled by #define COMM_DEBUG in the affected programmer file. An added benefit is a tremendous size reduction in verbose probe/read/write/erase logs because only flash chip driver messages remain. In some cases, logs will shrink from 65 MB to 10 kB or less. The right(tm) fix would be two different debug levels (DEBUG and SPEW) and the ability to differentiate between programmer debug messages and flash chip debug messages. Until the design for the message printing infrastructure is finished, this is the best stop-gap measure we can get. Corresponding to flashrom svn r834. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audioahcked@gmail.com>
* Replace remaining explicit erases in SPI programmer drivers with auto-erasesCarl-Daniel Hailfinger2009-08-101-16/+4
| | | | | | | | | | | | | Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well. Corresponding to flashrom svn r673. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carlos Arnau Perez <cemede@gmail.com>
* Use a distinct return code for SPI commands with unsupported/invalid lengthCarl-Daniel Hailfinger2009-07-141-1/+2
| | | | | | | | | | | Some drivers support only a few combinations of read/write length and return error otherwise. Having a distinct return code for this error means we can handle it in upper layers. Corresponding to flashrom svn r653. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Convert SPI byte program to use the multicommand infrastructureCarl-Daniel Hailfinger2009-07-121-4/+1
| | | | | | | | | | Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r651. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested it on Epia-m700 worked okay. Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Add SPI multicommand infrastructureCarl-Daniel Hailfinger2009-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI opcodes need to be sent in direct succession after each other without any chip deselect happening in between. A prominent example is WREN (Write Enable) directly before PP (Page Program). Intel calls the first opcode in such a row "preopcode". Right now, we ignore the direct succession requirement completely and it works pretty well because most onboard SPI masters have a timing or heuristics which make the problem disappear. The FT2232 SPI flasher is different. Since it is an external flasher, timing is very different to what we can expect from onboard flashers and this leads to failure at slow speeds. This patch allows any function to submit multiple SPI commands in a stream to any flasher. Support in the individual flashers isn't implemented yet, so there is one generic function which passes the each command in the stream one-by-one to the command functions of the selected SPI flash driver. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> Corresponding to flashrom svn r645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
* Support reads of arbitrary rangeCarl-Daniel Hailfinger2009-06-161-2/+2
| | | | | | | | | | | | That means you can tell flashrom to read exactly bytes 12345-56789 (start 12345, length 44445) and it will not fetch a single byte more. Uwe tested this on one LPC, one SPI, and one parallel flash board. Corresponding to flashrom svn r596. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Flashrom only checks for very few chips if the erase workedCarl-Daniel Hailfinger2009-06-151-1/+4
| | | | | | | | | | | | | | | | | | | And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Corresponding to flashrom svn r595. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Every SPI host controller implemented its own way to read flash chipsCarl-Daniel Hailfinger2009-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | This was partly due to a design problem in the abstraction layer. There should be exactly two different functions for reading SPI chips: - memory mapped reads - SPI command reads. Each of them should be contained in a separate function, optionally taking parameters where needed. This patch solves the problems mentioned above, shortens the code and makes the code logic a lot more obvious. Since open-coding the min() function leads to errors, include it in this patch as well. Corresponding to flashrom svn r589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Add programmer-specific delay functionsCarl-Daniel Hailfinger2009-06-051-2/+2
| | | | | | | | | | | Add external programmer delay functions so external programmers can handle the delay on their own if needed. Corresponding to flashrom svn r578. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Only probe for chips with compatible bus protocolsCarl-Daniel Hailfinger2009-06-011-0/+3
| | | | | | | | | | | | | | | | | | It doesn't make sense to probe for SPI chips on a LPC host, nor does it make sense to probe for LPC chips on a Parallel host. This change is backwards compatible, but adding host protocol info to chipset init functions will speed up probing. Once all chipset init functions are updated and the Winbond W29EE011 and AMIC A49LF040A chip definitions are updated, the W29EE011 workaround can be deleted as the W29/A49 conflict magically disappears. Corresponding to flashrom svn r560. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested on real hardware and Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-1/+1
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refactor SuperIO accessesCarl-Daniel Hailfinger2009-05-251-5/+5
| | | | | | | | | | | | | | | We had duplicated code under different names and even open-coded some functions in some places. wbsio_read/regval -> sio_read wbsio_write/regwrite -> sio_write wbsio_mask -> sio_mask board_biostar_p4m80_m4 now uses existing IT87 functions. Corresponding to flashrom svn r547. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-3/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Chips like the SST SST25VF080B can only handle single byte writes outside ↵Carl-Daniel Hailfinger2009-05-091-1/+1
| | | | | | | | | | | | | | | | | | AAI mode Change SPI architecture to handle 1-byte chunk chip writing differently from 256-byte chunk chip writing. Annotate SPI chip write functions with _256 or _1 suffix denoting the number of bytes they write at maximum. The 1-byte chunk writing is cut-n-pasted to different SPI drivers right now. A later patch can move them to the generic spi_chip_write_1. Corresponding to flashrom svn r485. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine handling of spi_write_enable() failures to fix chip erases on ichspiCarl-Daniel Hailfinger2009-05-091-1/+4
| | | | | | | | | | | | | | | Until the ICH SPI driver can handle preopcodes as standalone opcodes, we should handle such special opcode failure gracefully on ICH and compatible chipsets. This fixes chip erase on almost all ICH+VIA SPI masters. Thanks to Ali Nadalizadeh for helping track down this bug! Corresponding to flashrom svn r484. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Some coding style and consistency fixesUwe Hermann2009-04-151-6/+12
| | | | | | | Corresponding to flashrom svn r429 and coreboot v2 svn r4117. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Winbond SuperIO SPI driverPeter Stuge2009-01-261-0/+201
Developed and tested to work on Intel D201GLY in July 2008. Tested by a helpful person on IRC whose name I've since forgotten. Sorry! Corresponding to flashrom svn r404 and coreboot v2 svn r3910. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ward Vandewege <ward@gnu.org>