From c24413879c42c24a534735ef71859ab1054a4716 Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Tue, 9 Nov 2010 22:00:31 +0000 Subject: Support setting the Dediprog SF100 SPI voltage Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Corresponding to flashrom svn r1226. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Stefan Reinauer --- flashrom.8 | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'flashrom.8') diff --git a/flashrom.8 b/flashrom.8 index 667e06bc..0f2a6c4d 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -402,7 +402,20 @@ can be any of (in Hz). The default is the maximum frequency of 8 MHz. .TP .BR "dediprog " programmer -No parameters defined yet. +An optional +.B voltage +parameter specifies the voltage the Dediprog should use. The default unit is +Volt if no unit is specified. You can use +.BR mV ", " milliVolt ", " V " or " Volt +as unit specifier. Syntax is +.sp +.B "flashrom \-p dediprog:voltage=value" +.sp +where +.B value +can be any of +.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V +or the equivalent in mV. .TP .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use -- cgit v1.2.3