From e5eafb21912044f84732dddc7f8d019bb0b00016 Mon Sep 17 00:00:00 2001 From: Michael Karcher Date: Sun, 7 Mar 2010 12:11:08 +0000 Subject: Refactor man page This patch puts the description of the different programmers into a separate section of the manpage instead of having them one after the other without visual structuring in the description of "-p". It is made as a preparation of a man-page patch that adds the background of board enables into flashrom.8 that would really blow up the OPTIONS section. The only differences in content are: - The parameter for serprog is mandatory, not optional - Default behaviour of it87spi (using BIOS-set I/O address) is mentioned. - Default speed of buspiratespi is mentioned. Corresponding to flashrom svn r922. Signed-off-by: Michael Karcher Acked-by: Carl-Daniel Hailfinger --- flashrom.8 | 86 +++++++++++++++++++++++++++++++++++--------------------------- 1 file changed, 49 insertions(+), 37 deletions(-) (limited to 'flashrom.8') diff --git a/flashrom.8 b/flashrom.8 index 126f4af4..696aba2f 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -131,7 +131,7 @@ Same as but outputs the supported hardware in MediaWiki syntax, so that it can be easily pasted into the wiki page at http://www.flashrom.org/. .TP -.B "\-p, \-\-programmer " +.B "\-p, \-\-programmer [:parameters]" Specify the programmer device. Currently supported are: .sp .BR "* internal" " (default, for in-system flashing in the mainboard)" @@ -156,7 +156,27 @@ Specify the programmer device. Currently supported are: .sp .BR "* buspiratespi" " (for flash ROMs attached to a Bus Pirate)" .sp -The dummy programmer has an optional parameter specifying the bus types it +Some programmers have optional or mandatory parameters which are described +in detail in the +.B PROGRAMMER SPECIFIC INFO +section. Support for some programmers can be disabled at compile time. +.B "flashrom -h" +lists all supported programmers. +.TP +.B "\-h, \-\-help" +Show a help text and exit. +.TP +.B "\-R, \-\-version" +Show version information and exit. +.SH PROGRAMMER SPECIFIC INFO +Some programmer drivers accept further parameters to set programmer-specific +parameters. These parameters are seperated from the programmer name by a +colon. While some programmers take arguments at fixed positions, other +programmers use a key/value interface in which the key and value is separated +by an equal sign and different pairs are separated by a comma or a colon. +.TP +.BR "dummy " programmer +An optional parameter specifies the bus types it should support. For that you have to use the .B "flashrom -p dummy:type" syntax where @@ -167,11 +187,13 @@ in any order. .sp Example: .B "flashrom -p dummy:lpc,fwh" -.sp -If you have multiple supported PCI cards which can program flash chips -(NICs, SATA/IDE controllers, etc.) in your system, you must use the +.TP +.BR "nic3com" , " gfxnvidia" , " satasii" and " atahpt " programmers +These programmers have an option to specify the PCI address of the card +your want to use, which must be specified if more than one card supported +by the selected programmer is installed in your system. The syntax is .B "flashrom -p xxxx:bb:dd.f" -syntax to explicitly select one of them, where +, where .B xxxx is the name of the programmer .B bb @@ -183,22 +205,18 @@ is the PCI function number of the desired NIC. .sp Example: .B "flashrom -p nic3com:05:04.0" -.sp -Currently the following programmers support this mechanism: -.BR nic3com , -.BR gfxnvidia , -.BR satasii , -.BR atahpt . -.sp -The it87spi programmer has an optional parameter which will set the I/O base -port of the IT87* SPI controller interface to the port specified in the -parameter. For that you have to use the +.TP +.BR "it87spi " programmer +An optional parameter sets the I/O base port of the IT87* SPI controller +interface to the port specified in the parameter instead of using the port +address set by the BIOS. For that you have to use the .B "flashrom -p it87spi:port=portnum" syntax where .B portnum is an I/O port number which must be a multiple of 8. -.sp -The ft2232spi programmer has an optional parameter specifying the controller +.TP +.BR "ft2232spi " programmer +An optional parameter species the controller type and interface/port it should support. For that you have to use the .B "flashrom -p ft2232spi:model,port=interface" syntax where @@ -208,41 +226,35 @@ can be any of and .B interface can be any of -.B A -.BR B . +.BR "A B" . The default model is .B 4232H and the default interface is .BR B . -.sp -The serprog programmer has an optional parameter specifying either a serial +.TP +.BR "serprog " programmer +A mandatory parameter specifies either a serial device/baud combination or an IP/port combination for communication with the -programmer. For serial, you have to use the +programmer. In the device/baud combination, the device has to start with a +slash. For serial, you have to use the .B "flashrom -p serprog:/dev/device:baud" syntax and for IP, you have to use .B "flashrom -p serprog:ip:port" instead. More information about serprog is available in serprog-protocol.txt in the source distribution. +.TP +.BR "buspiratespi " programmer +A required dev parameter specifyies the Bus Pirate device node and an optional +spispeed parameter specifyies the frequency of the SPI bus. The parameter +delimiter is a comma. Syntax is .sp -The buspiratespi programmer has a required dev parameter specifying the Bus -Pirate device node and an optional spispeed parameter specifying the frequency -of the SPI bus. The parameter delimiter is a comma. Syntax is .B "flashrom -p buspiratespi:dev=/dev/device,spispeed=frequency" +.sp where .B frequency can be any of .B 30k 125k 250k 1M 2M 2.6M 4M 8M -(in Hz). -.sp -Support for some programmers can be disabled at compile time. -.B "flashrom -h" -lists all supported programmers. -.TP -.B "\-h, \-\-help" -Show a help text and exit. -.TP -.B "\-R, \-\-version" -Show version information and exit. +(in Hz). The default is the maximum frequency of 8 MHz. .SH EXIT STATUS flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem (/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails. -- cgit v1.2.3