From 6afb613fefbd4b484babafa9680b9570aadb255d Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Mon, 3 Nov 2008 00:02:11 +0000 Subject: Add additional SPI sector erase and chip erase command functions Not all chips support all commands, so allow the implementer to select the matching function. Fix a layering violation in ICH SPI code to be less bad. Still not perfect, but the new code is shorter, more generic and architecturally more sound. TODO (in a separate patch): - move the generic sector erase code to spi.c - decide which erase command to use based on info about the chip - create a generic spi_erase_all_sectors function which calls the generic sector erase function Thanks to Stefan for reviewing and commenting. Corresponding to flashrom svn r337 and coreboot v2 svn r3722. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Stefan Reinauer --- spi.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'spi.c') diff --git a/spi.c b/spi.c index 83624fa3..3bd29b09 100644 --- a/spi.c +++ b/spi.c @@ -271,6 +271,22 @@ void spi_prettyprint_status_register(struct flashchip *flash) } } +int spi_chip_erase_60(struct flashchip *flash) +{ + const unsigned char cmd[JEDEC_CE_60_OUTSIZE] = {JEDEC_CE_60}; + + spi_disable_blockprotect(); + spi_write_enable(); + /* Send CE (Chip Erase) */ + spi_command(sizeof(cmd), 0, cmd, NULL); + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 1-85 s, so wait in 1 s steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + sleep(1); + return 0; +} + int spi_chip_erase_c7(struct flashchip *flash) { const unsigned char cmd[JEDEC_CE_C7_OUTSIZE] = { JEDEC_CE_C7 }; @@ -287,6 +303,24 @@ int spi_chip_erase_c7(struct flashchip *flash) return 0; } +int spi_block_erase_52(const struct flashchip *flash, unsigned long addr) +{ + unsigned char cmd[JEDEC_BE_52_OUTSIZE] = {JEDEC_BE_52}; + + cmd[1] = (addr & 0x00ff0000) >> 16; + cmd[2] = (addr & 0x0000ff00) >> 8; + cmd[3] = (addr & 0x000000ff); + spi_write_enable(); + /* Send BE (Block Erase) */ + spi_command(sizeof(cmd), 0, cmd, NULL); + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + usleep(100 * 1000); + return 0; +} + /* Block size is usually * 64k for Macronix * 32k for SST -- cgit v1.2.3