From 32433db7aeda19e7f37f4e21f084f6017e85030b Mon Sep 17 00:00:00 2001 From: "William D. Jones" Date: Wed, 10 Feb 2021 19:27:34 -0500 Subject: machxo2: Prepare README.md for first PR. --- machxo2/README.md | 40 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 4 deletions(-) diff --git a/machxo2/README.md b/machxo2/README.md index 1c728722..55cc5763 100644 --- a/machxo2/README.md +++ b/machxo2/README.md @@ -1,6 +1,33 @@ # `nextpnr-machxo2` -To be filled in w/ details later. +_Experimental_ FOSS Place And Route backend for the Lattice MachXO2 family of +FPGAs. Fuzzing takes place as a subproject of [`prjtrellis`](https://github.com/YosysHQ/prjtrellis). + +Known to work: + +* Basic routing from pads to SLICEs and back! +* Basic packing of one type of FF and LUT into _half_ of a SLICE! +* Using the internal oscillator `OSCH` as a clock +* `LOGIC` SLICE mode + +Things that probably work but are untested: + +* Any non-3.3V I/O standard that doesn't use bank VREFs. + +Things remaining to do include (but not limited to): + +* More intelligent and efficient packing +* Global Routing (exists in database/sim models, `nextpnr-machxo2` doesn't use + it yet) +* Secondary High Fanout Nets +* Edge Clocks (clock pads work, but not routed to global routing yet) +* PLLs +* Synchronous Release Global Set/Reset Interface (`SGSR`) +* Embedded Function Block (`EFB`) +* All DDR-related functionality +* Bank VREFs +* Embedded Block RAM (`EBR`) +* `CCU2` and `DPRAM` SLICE modes ## Quick Start @@ -19,7 +46,9 @@ python3-setuptools python3-serial ### Installation -Use an empty directory to hold all the cloned repositories. +Use an empty directory to hold all the cloned repositories. Upstream repos +can be used as well (e.g. [`YosysHQ/prjtrellis`](https://github.com/YosysHQ/prjtrellis), +etc.). ``` git clone git@github.com:cr1901/prjtrellis.git @@ -56,6 +85,9 @@ cmake . -DARCH=machxo2 -DBUILD_GUI=OFF -DTRELLIS_INSTALL_PREFIX=/usr -DBUILD_PY make ``` +Although uncommon, the `facade` and `machxo2` branches of the above repos are +occassionally rebased; use `git pull -f` if necessary. + ### Demo If you have a [TinyFPGA Ax2](https://store.tinyfpga.com/products/tinyfpga-a2) board @@ -65,9 +97,9 @@ MachXO2; the gateware will flash the LED! ``` cd machxo2/examples/ -sh demo.sh +sh demo.sh tinyfpga ``` The `tinyfpga.v` code used in `demo.sh` is slightly modified from the [user's guide](https://tinyfpga.com/a-series-guide.html) to accommodate -`(* LOC = "pin" *)` constraints. +`(* LOC = "pin" *)` constraints and the built-in user LED. -- cgit v1.2.3