From f63a9a48a489a3e54ee44daf77211eba957a6e4d Mon Sep 17 00:00:00 2001
From: Alessandro Comodi <acomodi@antmicro.com>
Date: Mon, 15 Mar 2021 18:03:14 +0100
Subject: fpga_interchange: re-add README with updated instructions

Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
---
 fpga_interchange/examples/README.md | 69 +++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 fpga_interchange/examples/README.md

(limited to 'fpga_interchange')

diff --git a/fpga_interchange/examples/README.md b/fpga_interchange/examples/README.md
new file mode 100644
index 00000000..0b7f4ae2
--- /dev/null
+++ b/fpga_interchange/examples/README.md
@@ -0,0 +1,69 @@
+## FPGA interchange instructions
+
+These are instructions on how to get the dependencies, generate the FPGA interchange architecture build system and
+run some example designs.
+
+
+### Installing dependencies
+
+Install java and javac if not already installed:
+```
+# Or equivalent for your local system.
+sudo apt-get install openjdk-10-jdk
+```
+
+Install capnproto if not already installed. Version 0.7.0 or higher is required.
+As stated in the [official instructions](https://capnproto.org/install.html), the version on the common package managers
+might not be up to date with the latest version, hence it is suggested to install
+from the archive or, in alternative, directly from the git repository.
+
+Install capnproto-java if not already installed:
+```
+git clone https://github.com/capnproto/capnproto-java.git
+cd capnproto-java
+make
+sudo make install
+```
+
+Install python-fpga-interchange if not already installed:
+```
+git clone https://github.com/SymbiFlow/python-fpga-interchange.git
+cd python-fpga-interchange.git
+python -m pip install -e .
+```
+
+Clone RapidWright, if not already cloned:
+```
+git clone https://github.com/Xilinx/RapidWright.git
+cd RapidWright
+make update_jars
+```
+
+### Build instructions
+
+Once dependencies are installed/cloned, configure the build system for the FPGA interchange.
+
+From the nextpnr root dir run:
+
+```
+mkdir build
+cd build
+cmake .. --DARCH=fpga_interchange -DRAPIDWRIGHT_PATH=<RapidWright path> -DINTERCHANGE_SCHEMA_PATH=<fpga-interchange-schema path> -DPYTHON_INTERCHANGE_PATH=<python-fpga-interchange path>
+```
+
+To build the xc7a35t architecture, run:
+```
+make chipdb-xc7a35t-bin
+```
+
+To build the example designs run:
+```
+make test-fpga_interchange-wire_arty-dcp
+```
+
+The make targets for the example designs follow the same pattern: `test-fpga_interchange-<test_name>-<output>`, where `output` is the name of the intermediate step of the build which can be:
+
+- `json`: synthesis output
+- `netlist`: logical netlist
+- `phys`: physical netlist
+- `dcp`: design checkpoint
-- 
cgit v1.2.3