diff options
Diffstat (limited to 'techlibs/xilinx/cells_map.v')
| -rw-r--r-- | techlibs/xilinx/cells_map.v | 295 |
1 files changed, 253 insertions, 42 deletions
diff --git a/techlibs/xilinx/cells_map.v b/techlibs/xilinx/cells_map.v index 40789ddbe..b8e5bafc7 100644 --- a/techlibs/xilinx/cells_map.v +++ b/techlibs/xilinx/cells_map.v @@ -2,6 +2,7 @@ * yosys -- Yosys Open SYnthesis Suite * * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * 2019 Eddie Hung <eddie@fpgeh.com> * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -23,9 +24,9 @@ module _90_dff_nn0_to_np0 (input D, C, R, output Q); \$_DFF_NP0_ _TECHMAP_REPLA (* techmap_celltype = "$_DFF_PN0_" *) module _90_dff_pn0_to_pp0 (input D, C, R, output Q); \$_DFF_PP0_ _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule (* techmap_celltype = "$_DFF_NN1_" *) -module _90_dff_nn1_to_np1 (input D, C, R, output Q); \$_DFF_NP1 _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule +module _90_dff_nn1_to_np1 (input D, C, R, output Q); \$_DFF_NP1_ _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule (* techmap_celltype = "$_DFF_PN1_" *) -module _90_dff_pn1_to_pp1 (input D, C, R, output Q); \$_DFF_PP1 _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule +module _90_dff_pn1_to_pp1 (input D, C, R, output Q); \$_DFF_PP1_ _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule module \$__SHREG_ (input C, input D, input E, output Q); parameter DEPTH = 0; @@ -55,7 +56,6 @@ module \$__XILINX_SHREG_ (input C, input D, input [31:0] L, input E, output Q, o localparam [DEPTH-1:0] INIT_R = brev(INIT); parameter _TECHMAP_CONSTMSK_L_ = 0; - parameter _TECHMAP_CONSTVAL_L_ = 0; wire CE; generate @@ -88,69 +88,280 @@ module \$__XILINX_SHREG_ (input C, input D, input [31:0] L, input E, output Q, o end else if (DEPTH > 65 && DEPTH <= 96) begin wire T0, T1, T2, T3, T4, T5, T6; - SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[32-1: 0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D( D), .Q(T0), .Q31(T1)); SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); \$__XILINX_SHREG_ #(.DEPTH(DEPTH-64), .INIT(INIT[DEPTH-64-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_2 (.C(C), .D(T3), .L(L[4:0]), .E(E), .Q(T4)); if (&_TECHMAP_CONSTMSK_L_) assign Q = T4; - else begin - MUXF7 fpga_mux_0 (.O(T5), .I0(T0), .I1(T2), .S(L[5])); - MUXF7 fpga_mux_1 (.O(T6), .I0(T4), .I1(1'b0 /* unused */), .S(L[5])); - MUXF8 fpga_mux_2 (.O(Q), .I0(T5), .I1(T6), .S(L[6])); - end + else + \$__XILINX_MUXF78 fpga_hard_mux (.I0(T0), .I1(T2), .I2(T4), .I3(1'bx), .S0(L[5]), .S1(L[6]), .O(Q)); end else if (DEPTH > 97 && DEPTH < 128) begin wire T0, T1, T2, T3, T4, T5, T6, T7, T8; - SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[32-1: 0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D( D), .Q(T0), .Q31(T1)); SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); SRLC32E #(.INIT(INIT_R[96-1:64]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_2 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T3), .Q(T4), .Q31(T5)); \$__XILINX_SHREG_ #(.DEPTH(DEPTH-96), .INIT(INIT[DEPTH-96-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_3 (.C(C), .D(T5), .L(L[4:0]), .E(E), .Q(T6)); if (&_TECHMAP_CONSTMSK_L_) assign Q = T6; - else begin - MUXF7 fpga_mux_0 (.O(T7), .I0(T0), .I1(T2), .S(L[5])); - MUXF7 fpga_mux_1 (.O(T8), .I0(T4), .I1(T6), .S(L[5])); - MUXF8 fpga_mux_2 (.O(Q), .I0(T7), .I1(T8), .S(L[6])); - end + else + \$__XILINX_MUXF78 fpga_hard_mux (.I0(T0), .I1(T2), .I2(T4), .I3(T6), .S0(L[5]), .S1(L[6]), .O(Q)); end else if (DEPTH == 128) begin wire T0, T1, T2, T3, T4, T5, T6; - SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); - SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); - SRLC32E #(.INIT(INIT_R[96-1:64]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_2 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T3), .Q(T4), .Q31(T5)); + SRLC32E #(.INIT(INIT_R[ 32-1: 0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D( D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[ 64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); + SRLC32E #(.INIT(INIT_R[ 96-1:64]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_2 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T3), .Q(T4), .Q31(T5)); SRLC32E #(.INIT(INIT_R[128-1:96]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_3 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T5), .Q(T6), .Q31(SO)); if (&_TECHMAP_CONSTMSK_L_) assign Q = T6; - else begin - wire T7, T8; - MUXF7 fpga_mux_0 (.O(T7), .I0(T0), .I1(T2), .S(L[5])); - MUXF7 fpga_mux_1 (.O(T8), .I0(T4), .I1(T6), .S(L[5])); - MUXF8 fpga_mux_2 (.O(Q), .I0(T7), .I1(T8), .S(L[6])); - end + else + \$__XILINX_MUXF78 fpga_hard_mux (.I0(T0), .I1(T2), .I2(T4), .I3(T6), .S0(L[5]), .S1(L[6]), .O(Q)); + end + // For fixed length, if just 1 over a convenient value, decompose + else if (DEPTH <= 129 && &_TECHMAP_CONSTMSK_L_) begin + wire T; + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-1), .INIT(INIT[DEPTH-1:1]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl (.C(C), .D(D), .L({32{1'b1}}), .E(E), .Q(T)); + \$__XILINX_SHREG_ #(.DEPTH(1), .INIT(INIT[0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_last (.C(C), .D(T), .L(L), .E(E), .Q(Q)); end - else if (DEPTH <= 129 && ~&_TECHMAP_CONSTMSK_L_) begin - // Handle cases where fixed-length depth is - // just 1 over a convenient value + // For variable length, if just 1 over a convenient value, then bump up one more + else if (DEPTH < 129 && ~&_TECHMAP_CONSTMSK_L_) \$__XILINX_SHREG_ #(.DEPTH(DEPTH+1), .INIT({INIT,1'b0}), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) _TECHMAP_REPLACE_ (.C(C), .D(D), .L(L), .E(E), .Q(Q)); + else begin + localparam depth0 = 128; + localparam num_srl128 = DEPTH / depth0; + localparam depthN = DEPTH % depth0; + wire [num_srl128 + (depthN > 0 ? 1 : 0) - 1:0] T; + wire [num_srl128 + (depthN > 0 ? 1 : 0) :0] S; + assign S[0] = D; + genvar i; + for (i = 0; i < num_srl128; i++) + \$__XILINX_SHREG_ #(.DEPTH(depth0), .INIT(INIT[DEPTH-1-i*depth0-:depth0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl (.C(C), .D(S[i]), .L(L[$clog2(depth0)-1:0]), .E(E), .Q(T[i]), .SO(S[i+1])); + + if (depthN > 0) + \$__XILINX_SHREG_ #(.DEPTH(depthN), .INIT(INIT[depthN-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_last (.C(C), .D(S[num_srl128]), .L(L[$clog2(depth0)-1:0]), .E(E), .Q(T[num_srl128])); + + if (&_TECHMAP_CONSTMSK_L_) + assign Q = T[num_srl128 + (depthN > 0 ? 1 : 0) - 1]; + else + assign Q = T[L[DEPTH-1:$clog2(depth0)]]; + end + endgenerate +endmodule + +`ifdef MIN_MUX_INPUTS +module \$__XILINX_SHIFTX (A, B, Y); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] Y; + + parameter [A_WIDTH-1:0] _TECHMAP_CONSTMSK_A_ = 0; + parameter [A_WIDTH-1:0] _TECHMAP_CONSTVAL_A_ = 0; + parameter [B_WIDTH-1:0] _TECHMAP_CONSTMSK_B_ = 0; + parameter [B_WIDTH-1:0] _TECHMAP_CONSTVAL_B_ = 0; + + function integer A_WIDTH_trimmed; + input integer start; + begin + A_WIDTH_trimmed = start; + while (A_WIDTH_trimmed > 0 && _TECHMAP_CONSTMSK_A_[A_WIDTH_trimmed-1] && _TECHMAP_CONSTVAL_A_[A_WIDTH_trimmed-1] === 1'bx) + A_WIDTH_trimmed = A_WIDTH_trimmed - 1; + end + endfunction + + generate + genvar i, j; + // Bit-blast + if (Y_WIDTH > 1) begin + for (i = 0; i < Y_WIDTH; i++) + \$__XILINX_SHIFTX #(.A_SIGNED(A_SIGNED), .B_SIGNED(B_SIGNED), .A_WIDTH(A_WIDTH-Y_WIDTH+1), .B_WIDTH(B_WIDTH), .Y_WIDTH(1'd1)) bitblast (.A(A[A_WIDTH-Y_WIDTH+i:i]), .B(B), .Y(Y[i])); + end + // If the LSB of B is constant zero (and Y_WIDTH is 1) then + // we can optimise by removing every other entry from A + // and popping the constant zero from B + else if (_TECHMAP_CONSTMSK_B_[0] && !_TECHMAP_CONSTVAL_B_[0]) begin + wire [(A_WIDTH+1)/2-1:0] A_i; + for (i = 0; i < (A_WIDTH+1)/2; i++) + assign A_i[i] = A[i*2]; + \$__XILINX_SHIFTX #(.A_SIGNED(A_SIGNED), .B_SIGNED(B_SIGNED), .A_WIDTH((A_WIDTH+1'd1)/2'd2), .B_WIDTH(B_WIDTH-1'd1), .Y_WIDTH(Y_WIDTH)) _TECHMAP_REPLACE_ (.A(A_i), .B(B[B_WIDTH-1:1]), .Y(Y)); + end + // Trim off any leading 1'bx -es in A + else if (_TECHMAP_CONSTMSK_A_[A_WIDTH-1] && _TECHMAP_CONSTVAL_A_[A_WIDTH-1] === 1'bx) begin + localparam A_WIDTH_new = A_WIDTH_trimmed(A_WIDTH-1); + \$__XILINX_SHIFTX #(.A_SIGNED(A_SIGNED), .B_SIGNED(B_SIGNED), .A_WIDTH(A_WIDTH_new), .B_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) _TECHMAP_REPLACE_ (.A(A[A_WIDTH_new-1:0]), .B(B), .Y(Y)); + end + else if (A_WIDTH < `MIN_MUX_INPUTS) begin + wire _TECHMAP_FAIL_ = 1; + end + else if (A_WIDTH == 2) begin + MUXF7 fpga_hard_mux (.I0(A[0]), .I1(A[1]), .S(B[0]), .O(Y)); + end + else if (A_WIDTH <= 4) begin + wire [4-1:0] Ax; + if (A_WIDTH == 4) + assign Ax = A; + else + // Rather than extend with 1'bx which gets flattened to 1'b0 + // causing the "don't care" status to get lost, extend with + // the same driver of F7B.I0 so that we can optimise F7B away + // later + assign Ax = {A[1], A}; + \$__XILINX_MUXF78 fpga_hard_mux (.I0(Ax[0]), .I1(Ax[2]), .I2(Ax[1]), .I3(Ax[3]), .S0(B[1]), .S1(B[0]), .O(Y)); + end + // Note that the following decompositions are 'backwards' in that + // the LSBs are placed on the hard resources, and the soft resources + // are used for MSBs. + // This has the effect of more effectively utilising the hard mux; + // take for example a 5:1 multiplexer, currently this would map as: + // + // A[0] \___ __ A[0] \__ __ + // A[4] / \| \ whereas the more A[1] / \| \ + // A[1] _____| | obvious mapping A[2] \___| | + // A[2] _____| |-- of MSBs to hard A[3] / | |__ + // A[3]______| | resources would A[4] ____| | + // |__/ lead to: 1'bx ____| | + // || |__/ + // || || + // B[1:0] B[1:2] + // + // Expectation would be that the 'forward' mapping (right) is more + // area efficient (consider a 9:1 multiplexer using 2x4:1 multiplexers + // on its I0 and I1 inputs, and A[8] and 1'bx on its I2 and I3 inputs) + // but that the 'backwards' mapping (left) is more delay efficient + // since smaller LUTs are faster than wider ones. + else if (A_WIDTH <= 8) begin + wire [8-1:0] Ax = {{{8-A_WIDTH}{1'bx}}, A}; + wire T0 = B[2] ? Ax[4] : Ax[0]; + wire T1 = B[2] ? Ax[5] : Ax[1]; + wire T2 = B[2] ? Ax[6] : Ax[2]; + wire T3 = B[2] ? Ax[7] : Ax[3]; + \$__XILINX_MUXF78 fpga_hard_mux (.I0(T0), .I1(T2), .I2(T1), .I3(T3), .S0(B[1]), .S1(B[0]), .O(Y)); + end + else if (A_WIDTH <= 16) begin + wire [16-1:0] Ax = {{{16-A_WIDTH}{1'bx}}, A}; + wire T0 = B[2] ? B[3] ? Ax[12] : Ax[4] + : B[3] ? Ax[ 8] : Ax[0]; + wire T1 = B[2] ? B[3] ? Ax[13] : Ax[5] + : B[3] ? Ax[ 9] : Ax[1]; + wire T2 = B[2] ? B[3] ? Ax[14] : Ax[6] + : B[3] ? Ax[10] : Ax[2]; + wire T3 = B[2] ? B[3] ? Ax[15] : Ax[7] + : B[3] ? Ax[11] : Ax[3]; + \$__XILINX_MUXF78 fpga_hard_mux (.I0(T0), .I1(T2), .I2(T1), .I3(T3), .S0(B[1]), .S1(B[0]), .O(Y)); end else begin - localparam lower_clog2 = $clog2((DEPTH+1)/2); - localparam lower_depth = 2 ** lower_clog2; - wire T0, T1, T2, T3; - if (&_TECHMAP_CONSTMSK_L_) begin - \$__XILINX_SHREG_ #(.DEPTH(lower_depth), .INIT(INIT[DEPTH-1:DEPTH-lower_depth]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_0 (.C(C), .D(D), .L(lower_depth-1), .E(E), .Q(T0)); - \$__XILINX_SHREG_ #(.DEPTH(DEPTH-lower_depth), .INIT(INIT[DEPTH-lower_depth-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_1 (.C(C), .D(T0), .L(DEPTH-lower_depth-1), .E(E), .Q(Q), .SO(T3)); - end - else begin - \$__XILINX_SHREG_ #(.DEPTH(lower_depth), .INIT(INIT[DEPTH-1:DEPTH-lower_depth]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_0 (.C(C), .D(D), .L(L[lower_clog2-1:0]), .E(E), .Q(T0), .SO(T1)); - \$__XILINX_SHREG_ #(.DEPTH(DEPTH-lower_depth), .INIT(INIT[DEPTH-lower_depth-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_1 (.C(C), .D(T1), .L(L[lower_clog2-1:0]), .E(E), .Q(T2), .SO(T3)); - assign Q = L[lower_clog2] ? T2 : T0; - end - if (DEPTH == 2 * lower_depth) - assign SO = T3; + localparam num_mux16 = (A_WIDTH+15) / 16; + localparam clog2_num_mux16 = $clog2(num_mux16); + wire [num_mux16-1:0] T; + wire [num_mux16*16-1:0] Ax = {{(num_mux16*16-A_WIDTH){1'bx}}, A}; + for (i = 0; i < num_mux16; i++) + \$__XILINX_SHIFTX #( + .A_SIGNED(A_SIGNED), + .B_SIGNED(B_SIGNED), + .A_WIDTH(16), + .B_WIDTH(4), + .Y_WIDTH(Y_WIDTH) + ) fpga_mux ( + .A(Ax[i*16+:16]), + .B(B[3:0]), + .Y(T[i]) + ); + \$__XILINX_SHIFTX #( + .A_SIGNED(A_SIGNED), + .B_SIGNED(B_SIGNED), + .A_WIDTH(num_mux16), + .B_WIDTH(clog2_num_mux16), + .Y_WIDTH(Y_WIDTH) + ) _TECHMAP_REPLACE_ ( + .A(T), + .B(B[B_WIDTH-1-:clog2_num_mux16]), + .Y(Y)); end endgenerate endmodule -`ifndef SRL_ONLY +(* techmap_celltype = "$__XILINX_SHIFTX" *) +module _90__XILINX_SHIFTX (A, B, Y); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] Y; + + \$shiftx #(.A_SIGNED(A_SIGNED), .B_SIGNED(B_SIGNED), .A_WIDTH(A_WIDTH), .B_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) _TECHMAP_REPLACE_ (.A(A), .B(B), .Y(Y)); +endmodule + +module \$_MUX_ (A, B, S, Y); + input A, B, S; + output Y; + generate + if (`MIN_MUX_INPUTS == 2) + \$__XILINX_SHIFTX #(.A_SIGNED(0), .B_SIGNED(0), .A_WIDTH(2), .B_WIDTH(1), .Y_WIDTH(1)) _TECHMAP_REPLACE_ (.A({B,A}), .B(S), .Y(Y)); + else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule + +module \$_MUX4_ (A, B, C, D, S, T, Y); + input A, B, C, D, S, T; + output Y; + \$__XILINX_SHIFTX #(.A_SIGNED(0), .B_SIGNED(0), .A_WIDTH(4), .B_WIDTH(2), .Y_WIDTH(1)) _TECHMAP_REPLACE_ (.A({D,C,B,A}), .B({T,S}), .Y(Y)); +endmodule + +module \$_MUX8_ (A, B, C, D, E, F, G, H, S, T, U, Y); + input A, B, C, D, E, F, G, H, S, T, U; + output Y; + \$__XILINX_SHIFTX #(.A_SIGNED(0), .B_SIGNED(0), .A_WIDTH(8), .B_WIDTH(3), .Y_WIDTH(1)) _TECHMAP_REPLACE_ (.A({H,G,F,E,D,C,B,A}), .B({U,T,S}), .Y(Y)); +endmodule + +module \$_MUX16_ (A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, S, T, U, V, Y); + input A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, S, T, U, V; + output Y; + \$__XILINX_SHIFTX #(.A_SIGNED(0), .B_SIGNED(0), .A_WIDTH(16), .B_WIDTH(4), .Y_WIDTH(1)) _TECHMAP_REPLACE_ (.A({P,O,N,M,L,K,J,I,H,G,F,E,D,C,B,A}), .B({V,U,T,S}), .Y(Y)); +endmodule +`endif + +`ifndef _ABC +module \$__XILINX_MUXF78 (O, I0, I1, I2, I3, S0, S1); + output O; + input I0, I1, I2, I3, S0, S1; + wire T0, T1; + parameter _TECHMAP_BITS_CONNMAP_ = 0; + parameter [_TECHMAP_BITS_CONNMAP_-1:0] _TECHMAP_CONNMAP_I0_ = 0; + parameter [_TECHMAP_BITS_CONNMAP_-1:0] _TECHMAP_CONNMAP_I1_ = 0; + parameter [_TECHMAP_BITS_CONNMAP_-1:0] _TECHMAP_CONNMAP_I2_ = 0; + parameter [_TECHMAP_BITS_CONNMAP_-1:0] _TECHMAP_CONNMAP_I3_ = 0; + parameter _TECHMAP_CONSTMSK_S0_ = 0; + parameter _TECHMAP_CONSTVAL_S0_ = 0; + parameter _TECHMAP_CONSTMSK_S1_ = 0; + parameter _TECHMAP_CONSTVAL_S1_ = 0; + if (_TECHMAP_CONSTMSK_S0_ && _TECHMAP_CONSTVAL_S0_ === 1'b1) + assign T0 = I1; + else if (_TECHMAP_CONSTMSK_S0_ || _TECHMAP_CONNMAP_I0_ === _TECHMAP_CONNMAP_I1_) + assign T0 = I0; + else + MUXF7 mux7a (.I0(I0), .I1(I1), .S(S0), .O(T0)); + if (_TECHMAP_CONSTMSK_S0_ && _TECHMAP_CONSTVAL_S0_ === 1'b1) + assign T1 = I3; + else if (_TECHMAP_CONSTMSK_S0_ || _TECHMAP_CONNMAP_I2_ === _TECHMAP_CONNMAP_I3_) + assign T1 = I2; + else + MUXF7 mux7b (.I0(I2), .I1(I3), .S(S0), .O(T1)); + if (_TECHMAP_CONSTMSK_S1_ && _TECHMAP_CONSTVAL_S1_ === 1'b1) + assign O = T1; + else if (_TECHMAP_CONSTMSK_S1_ || (_TECHMAP_CONNMAP_I0_ === _TECHMAP_CONNMAP_I1_ && _TECHMAP_CONNMAP_I1_ === _TECHMAP_CONNMAP_I2_ && _TECHMAP_CONNMAP_I2_ === _TECHMAP_CONNMAP_I3_)) + assign O = T0; + else + MUXF8 mux8 (.I0(T0), .I1(T1), .S(S1), .O(O)); +endmodule `endif |