diff options
Diffstat (limited to 'techlibs/xilinx/ff_map.v')
| -rw-r--r-- | techlibs/xilinx/ff_map.v | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/techlibs/xilinx/ff_map.v b/techlibs/xilinx/ff_map.v new file mode 100644 index 000000000..45d202294 --- /dev/null +++ b/techlibs/xilinx/ff_map.v @@ -0,0 +1,120 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +`ifndef _NO_FFS + +// Async reset, enable. + +module \$_DFFE_NP0P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFFE_PP0P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_DFFE_NP1P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .PRE(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFFE_PP1P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .PRE(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +// Async set and reset, enable. + +module \$_DFFSRE_NPPP_ (input D, C, E, S, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDCPE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_C_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR(R), .PRE(S)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFFSRE_PPPP_ (input D, C, E, S, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDCPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR(R), .PRE(S)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +// Sync reset, enable. + +module \$_SDFFE_NP0P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_SDFFE_PP0P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_SDFFE_NP1P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_SDFFE_PP1P_ (input D, C, E, R, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +// Latches with reset. + +module \$_DLATCH_NP0_ (input E, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDCE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DLATCH_PP0_ (input E, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DLATCH_NP1_ (input E, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDPE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DLATCH_PP1_ (input E, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(R)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +// Latches with set and reset. + +module \$_DLATCH_NPP_ (input E, S, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDCPE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(R), .PRE(S)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DLATCH_PPP_ (input E, S, R, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + LDCPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(R), .PRE(S)); + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +`endif + |