diff options
Diffstat (limited to 'techlibs/xilinx')
| -rw-r--r-- | techlibs/xilinx/Makefile.inc | 2 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_map.v | 786 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_model.v | 171 | ||||
| -rw-r--r-- | techlibs/xilinx/abc9_unmap.v | 61 | ||||
| -rw-r--r-- | techlibs/xilinx/cells_sim.v | 288 | ||||
| -rw-r--r-- | techlibs/xilinx/synth_xilinx.cc | 27 |
6 files changed, 187 insertions, 1148 deletions
diff --git a/techlibs/xilinx/Makefile.inc b/techlibs/xilinx/Makefile.inc index 9984290a6..d4d863831 100644 --- a/techlibs/xilinx/Makefile.inc +++ b/techlibs/xilinx/Makefile.inc @@ -54,8 +54,6 @@ $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/xc5v_dsp_map.v)) $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/xc7_dsp_map.v)) $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/xcu_dsp_map.v)) -$(eval $(call add_share_file,share/xilinx,techlibs/xilinx/abc9_map.v)) -$(eval $(call add_share_file,share/xilinx,techlibs/xilinx/abc9_unmap.v)) $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/abc9_model.v)) $(eval $(call add_gen_share_file,share/xilinx,techlibs/xilinx/brams_init_36.vh)) diff --git a/techlibs/xilinx/abc9_map.v b/techlibs/xilinx/abc9_map.v deleted file mode 100644 index 81f8a1d42..000000000 --- a/techlibs/xilinx/abc9_map.v +++ /dev/null @@ -1,786 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> - * 2019 Eddie Hung <eddie@fpgeh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// The following techmapping rules are intended to be run (with -max_iter 1) -// before invoking the `abc9` pass in order to transform the design into -// a format that it understands. - -`ifdef DFF_MODE -// For example, (complex) flip-flops are expected to be described as an -// combinatorial box (containing all control logic such as clock enable -// or synchronous resets) followed by a basic D-Q flop. -// Yosys will automatically analyse the simulation model (described in -// cells_sim.v) and detach any $_DFF_P_ or $_DFF_N_ cells present in -// order to extract the combinatorial control logic left behind. -// Specifically, a simulation model similar to the one below: -// -// ++===================================++ -// || Sim model || -// || /\/\/\/\ || -// D -->>-----< > +------+ || -// R -->>-----< Comb. > |$_DFF_| || -// CE -->>-----< logic >-----| [NP]_|---+---->>-- Q -// || +--< > +------+ | || -// || | \/\/\/\/ | || -// || | | || -// || +----------------------------+ || -// || || -// ++===================================++ -// -// is transformed into: -// -// ++==================++ -// || Comb box || -// || || -// || /\/\/\/\ || -// D -->>-----< > || -// R -->>-----< Comb. > || +-----------+ -// CE -->>-----< logic >--->>-- $Q --|$__ABC9_FF_|--+-->> Q -// abc9_ff.Q +-->>-----< > || +-----------+ | -// | || \/\/\/\/ || | -// | || || | -// | ++==================++ | -// | | -// +-----------------------------------------------+ -// -// The purpose of the following FD* rules are to wrap the flop with: -// (a) a special $__ABC9_FF_ in front of the FD*'s output, indicating to abc9 -// the connectivity of its basic D-Q flop -// (b) an optional $__ABC9_ASYNC_ cell in front of $__ABC_FF_'s output to -// capture asynchronous behaviour -// (c) a special abc9_ff.clock wire to capture its clock domain and polarity -// (indicated to `abc9' so that it only performs sequential synthesis -// (with reachability analysis) correctly on one domain at a time) -// (d) an (* abc9_init *) attribute on the $__ABC9_FF_ cell capturing its -// initial state -// NOTE: in order to perform sequential synthesis, `abc9' requires that -// the initial value of all flops be zero -// (e) a special _TECHMAP_REPLACE_.abc9_ff.Q wire that will be used for feedback -// into the (combinatorial) FD* cell to facilitate clock-enable behaviour - -module FDRE (output Q, (* techmap_autopurge *) input C, CE, D, R); - parameter [0:0] INIT = 1'b0; - parameter [0:0] IS_C_INVERTED = 1'b0; - parameter [0:0] IS_D_INVERTED = 1'b0; - parameter [0:0] IS_R_INVERTED = 1'b0; - wire QQ, $Q; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDSE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_S_INVERTED(IS_R_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .S(R) - ); - end - else begin - assign Q = QQ; - FDRE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_R_INVERTED(IS_R_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .R(R) - ); - end - endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q(QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, IS_C_INVERTED}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = QQ; -endmodule -module FDRE_1 (output Q, (* techmap_autopurge *) input C, CE, D, R); - parameter [0:0] INIT = 1'b0; - wire QQ, $Q; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDSE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .S(R) - ); - end - else begin - assign Q = QQ; - FDRE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .R(R) - ); - end - endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q(QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, 1'b1 /* IS_C_INVERTED */}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = QQ; -endmodule - -module FDSE (output Q, (* techmap_autopurge *) input C, CE, D, S); - parameter [0:0] INIT = 1'b1; - parameter [0:0] IS_C_INVERTED = 1'b0; - parameter [0:0] IS_D_INVERTED = 1'b0; - parameter [0:0] IS_S_INVERTED = 1'b0; - wire QQ, $Q; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDRE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_R_INVERTED(IS_S_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .R(S) - ); - end - else begin - assign Q = QQ; - FDSE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_S_INVERTED(IS_S_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .S(S) - ); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q(QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, IS_C_INVERTED}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = QQ; -endmodule -module FDSE_1 (output Q, (* techmap_autopurge *) input C, CE, D, S); - parameter [0:0] INIT = 1'b1; - wire QQ, $Q; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDRE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .R(S) - ); - end - else begin - assign Q = QQ; - FDSE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .S(S) - ); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q(QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, 1'b1 /* IS_C_INVERTED */}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = QQ; -endmodule - -module FDCE (output Q, (* techmap_autopurge *) input C, CE, D, CLR); - parameter [0:0] INIT = 1'b0; - parameter [0:0] IS_C_INVERTED = 1'b0; - parameter [0:0] IS_D_INVERTED = 1'b0; - parameter [0:0] IS_CLR_INVERTED = 1'b0; - wire QQ, $Q, $QQ; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDPE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_PRE_INVERTED(IS_CLR_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .PRE(CLR) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC1 below - ); - // Since this is an async flop, async behaviour is dealt with here - $__ABC9_ASYNC1 abc_async (.A($QQ), .S(CLR ^ IS_CLR_INVERTED), .Y(QQ)); - end - else begin - assign Q = QQ; - FDCE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_CLR_INVERTED(IS_CLR_INVERTED) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .CLR(CLR) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC0 below - ); - // Since this is an async flop, async behaviour is dealt with here - $__ABC9_ASYNC0 abc_async (.A($QQ), .S(CLR ^ IS_CLR_INVERTED), .Y(QQ)); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q($QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, IS_C_INVERTED}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = $QQ; -endmodule -module FDCE_1 (output Q, (* techmap_autopurge *) input C, CE, D, CLR); - parameter [0:0] INIT = 1'b0; - wire QQ, $Q, $QQ; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDPE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .PRE(CLR) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC1 below - ); - $__ABC9_ASYNC1 abc_async (.A($QQ), .S(CLR), .Y(QQ)); - end - else begin - assign Q = QQ; - FDCE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .CLR(CLR) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC0 below - ); - $__ABC9_ASYNC0 abc_async (.A($QQ), .S(CLR), .Y(QQ)); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q($QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, 1'b1 /* IS_C_INVERTED */}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = $QQ; -endmodule - -module FDPE (output Q, (* techmap_autopurge *) input C, CE, D, PRE); - parameter [0:0] INIT = 1'b1; - parameter [0:0] IS_C_INVERTED = 1'b0; - parameter [0:0] IS_D_INVERTED = 1'b0; - parameter [0:0] IS_PRE_INVERTED = 1'b0; - wire QQ, $Q, $QQ; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDCE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_CLR_INVERTED(IS_PRE_INVERTED), - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .CLR(PRE) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC0 below - ); - $__ABC9_ASYNC0 abc_async (.A($QQ), .S(PRE ^ IS_PRE_INVERTED), .Y(QQ)); - end - else begin - assign Q = QQ; - FDPE #( - .INIT(1'b0), - .IS_C_INVERTED(IS_C_INVERTED), - .IS_D_INVERTED(IS_D_INVERTED), - .IS_PRE_INVERTED(IS_PRE_INVERTED), - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .PRE(PRE) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC1 below - ); - $__ABC9_ASYNC1 abc_async (.A($QQ), .S(PRE ^ IS_PRE_INVERTED), .Y(QQ)); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q($QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, IS_C_INVERTED}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = $QQ; -endmodule -module FDPE_1 (output Q, (* techmap_autopurge *) input C, CE, D, PRE); - parameter [0:0] INIT = 1'b1; - wire QQ, $Q, $QQ; - generate if (INIT == 1'b1) begin - assign Q = ~QQ; - FDCE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(~D), .Q($Q), .C(C), .CE(CE), .CLR(PRE) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC0 below - ); - $__ABC9_ASYNC0 abc_async (.A($QQ), .S(PRE), .Y(QQ)); - end - else begin - assign Q = QQ; - FDPE_1 #( - .INIT(1'b0) - ) _TECHMAP_REPLACE_ ( - .D(D), .Q($Q), .C(C), .CE(CE), .PRE(PRE) - // ^^^ Note that async - // control is not directly - // supported by abc9 but its - // behaviour is captured by - // $__ABC9_ASYNC1 below - ); - $__ABC9_ASYNC1 abc_async (.A($QQ), .S(PRE), .Y(QQ)); - end endgenerate - (* abc9_init = 1'b0 *) - $__ABC9_FF_ abc9_ff (.D($Q), .Q($QQ)); - - // Special signals - wire [1:0] abc9_ff.clock = {C, 1'b1 /* IS_C_INVERTED */}; - wire [0:0] _TECHMAP_REPLACE_.abc9_ff.Q = $QQ; -endmodule -`endif - -// Attach a (combinatorial) black-box onto the output -// of thes LUTRAM primitives to capture their -// asynchronous read behaviour -module RAM32X1D ( - output DPO, SPO, - (* techmap_autopurge *) input D, - (* techmap_autopurge *) input WCLK, - (* techmap_autopurge *) input WE, - (* techmap_autopurge *) input A0, A1, A2, A3, A4, - (* techmap_autopurge *) input DPRA0, DPRA1, DPRA2, DPRA3, DPRA4 -); - parameter INIT = 32'h0; - parameter IS_WCLK_INVERTED = 1'b0; - wire $DPO, $SPO; - RAM32X1D #( - .INIT(INIT), .IS_WCLK_INVERTED(IS_WCLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .DPO($DPO), .SPO($SPO), - .D(D), .WCLK(WCLK), .WE(WE), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .A4(A4), - .DPRA0(DPRA0), .DPRA1(DPRA1), .DPRA2(DPRA2), .DPRA3(DPRA3), .DPRA4(DPRA4) - ); - $__ABC9_RAM6 spo (.A($SPO), .S({1'b1, A4, A3, A2, A1, A0}), .Y(SPO)); - $__ABC9_RAM6 dpo (.A($DPO), .S({1'b1, DPRA4, DPRA3, DPRA2, DPRA1, DPRA0}), .Y(DPO)); -endmodule - -module RAM64X1D ( - output DPO, SPO, - (* techmap_autopurge *) input D, - (* techmap_autopurge *) input WCLK, - (* techmap_autopurge *) input WE, - (* techmap_autopurge *) input A0, A1, A2, A3, A4, A5, - (* techmap_autopurge *) input DPRA0, DPRA1, DPRA2, DPRA3, DPRA4, DPRA5 -); - parameter INIT = 64'h0; - parameter IS_WCLK_INVERTED = 1'b0; - wire $DPO, $SPO; - RAM64X1D #( - .INIT(INIT), .IS_WCLK_INVERTED(IS_WCLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .DPO($DPO), .SPO($SPO), - .D(D), .WCLK(WCLK), .WE(WE), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .A4(A4), .A5(A5), - .DPRA0(DPRA0), .DPRA1(DPRA1), .DPRA2(DPRA2), .DPRA3(DPRA3), .DPRA4(DPRA4), .DPRA5(DPRA5) - ); - $__ABC9_RAM6 spo (.A($SPO), .S({A5, A4, A3, A2, A1, A0}), .Y(SPO)); - $__ABC9_RAM6 dpo (.A($DPO), .S({DPRA5, DPRA4, DPRA3, DPRA2, DPRA1, DPRA0}), .Y(DPO)); -endmodule - -module RAM128X1D ( - output DPO, SPO, - (* techmap_autopurge *) input D, - (* techmap_autopurge *) input WCLK, - (* techmap_autopurge *) input WE, - (* techmap_autopurge *) input [6:0] A, DPRA -); - parameter INIT = 128'h0; - parameter IS_WCLK_INVERTED = 1'b0; - wire $DPO, $SPO; - RAM128X1D #( - .INIT(INIT), .IS_WCLK_INVERTED(IS_WCLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .DPO($DPO), .SPO($SPO), - .D(D), .WCLK(WCLK), .WE(WE), - .A(A), - .DPRA(DPRA) - ); - $__ABC9_RAM7 spo (.A($SPO), .S(A), .Y(SPO)); - $__ABC9_RAM7 dpo (.A($DPO), .S(DPRA), .Y(DPO)); -endmodule - -module RAM32M ( - output [1:0] DOA, - output [1:0] DOB, - output [1:0] DOC, - output [1:0] DOD, - (* techmap_autopurge *) input [4:0] ADDRA, - (* techmap_autopurge *) input [4:0] ADDRB, - (* techmap_autopurge *) input [4:0] ADDRC, - (* techmap_autopurge *) input [4:0] ADDRD, - (* techmap_autopurge *) input [1:0] DIA, - (* techmap_autopurge *) input [1:0] DIB, - (* techmap_autopurge *) input [1:0] DIC, - (* techmap_autopurge *) input [1:0] DID, - (* techmap_autopurge *) input WCLK, - (* techmap_autopurge *) input WE -); - parameter [63:0] INIT_A = 64'h0000000000000000; - parameter [63:0] INIT_B = 64'h0000000000000000; - parameter [63:0] INIT_C = 64'h0000000000000000; - parameter [63:0] INIT_D = 64'h0000000000000000; - parameter [0:0] IS_WCLK_INVERTED = 1'b0; - wire [1:0] $DOA, $DOB, $DOC, $DOD; - RAM32M #( - .INIT_A(INIT_A), .INIT_B(INIT_B), .INIT_C(INIT_C), .INIT_D(INIT_D), - .IS_WCLK_INVERTED(IS_WCLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .DOA($DOA), .DOB($DOB), .DOC($DOC), .DOD($DOD), - .WCLK(WCLK), .WE(WE), - .ADDRA(ADDRA), .ADDRB(ADDRB), .ADDRC(ADDRC), .ADDRD(ADDRD), - .DIA(DIA), .DIB(DIB), .DIC(DIC), .DID(DID) - ); - $__ABC9_RAM6 doa0 (.A($DOA[0]), .S({1'b1, ADDRA}), .Y(DOA[0])); - $__ABC9_RAM6 doa1 (.A($DOA[1]), .S({1'b1, ADDRA}), .Y(DOA[1])); - $__ABC9_RAM6 dob0 (.A($DOB[0]), .S({1'b1, ADDRB}), .Y(DOB[0])); - $__ABC9_RAM6 dob1 (.A($DOB[1]), .S({1'b1, ADDRB}), .Y(DOB[1])); - $__ABC9_RAM6 doc0 (.A($DOC[0]), .S({1'b1, ADDRC}), .Y(DOC[0])); - $__ABC9_RAM6 doc1 (.A($DOC[1]), .S({1'b1, ADDRC}), .Y(DOC[1])); - $__ABC9_RAM6 dod0 (.A($DOD[0]), .S({1'b1, ADDRD}), .Y(DOD[0])); - $__ABC9_RAM6 dod1 (.A($DOD[1]), .S({1'b1, ADDRD}), .Y(DOD[1])); -endmodule - -module RAM64M ( - output DOA, - output DOB, - output DOC, - output DOD, - (* techmap_autopurge *) input [5:0] ADDRA, - (* techmap_autopurge *) input [5:0] ADDRB, - (* techmap_autopurge *) input [5:0] ADDRC, - (* techmap_autopurge *) input [5:0] ADDRD, - (* techmap_autopurge *) input DIA, - (* techmap_autopurge *) input DIB, - (* techmap_autopurge *) input DIC, - (* techmap_autopurge *) input DID, - (* techmap_autopurge *) input WCLK, - (* techmap_autopurge *) input WE -); - parameter [63:0] INIT_A = 64'h0000000000000000; - parameter [63:0] INIT_B = 64'h0000000000000000; - parameter [63:0] INIT_C = 64'h0000000000000000; - parameter [63:0] INIT_D = 64'h0000000000000000; - parameter [0:0] IS_WCLK_INVERTED = 1'b0; - wire $DOA, $DOB, $DOC, $DOD; - RAM64M #( - .INIT_A(INIT_A), .INIT_B(INIT_B), .INIT_C(INIT_C), .INIT_D(INIT_D), - .IS_WCLK_INVERTED(IS_WCLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .DOA($DOA), .DOB($DOB), .DOC($DOC), .DOD($DOD), - .WCLK(WCLK), .WE(WE), - .ADDRA(ADDRA), .ADDRB(ADDRB), .ADDRC(ADDRC), .ADDRD(ADDRD), - .DIA(DIA), .DIB(DIB), .DIC(DIC), .DID(DID) - ); - $__ABC9_RAM6 doa (.A($DOA), .S(ADDRA), .Y(DOA)); - $__ABC9_RAM6 dob (.A($DOB), .S(ADDRB), .Y(DOB)); - $__ABC9_RAM6 doc (.A($DOC), .S(ADDRC), .Y(DOC)); - $__ABC9_RAM6 dod (.A($DOD), .S(ADDRD), .Y(DOD)); -endmodule - -module SRL16 ( - output Q, - (* techmap_autopurge *) input A0, A1, A2, A3, CLK, D -); - parameter [15:0] INIT = 16'h0000; - wire $Q; - SRL16 #( - .INIT(INIT), - ) _TECHMAP_REPLACE_ ( - .Q($Q), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .CLK(CLK), .D(D) - ); - $__ABC9_RAM6 q (.A($Q), .S({1'b1, A3, A2, A1, A0, 1'b1}), .Y(Q)); -endmodule - -module SRL16E ( - output Q, - (* techmap_autopurge *) input A0, A1, A2, A3, CE, CLK, D -); - parameter [15:0] INIT = 16'h0000; - parameter [0:0] IS_CLK_INVERTED = 1'b0; - wire $Q; - SRL16E #( - .INIT(INIT), .IS_CLK_INVERTED(IS_CLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .Q($Q), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .CE(CE), .CLK(CLK), .D(D) - ); - $__ABC9_RAM6 q (.A($Q), .S({1'b1, A3, A2, A1, A0, 1'b1}), .Y(Q)); -endmodule - -module SRLC16 ( - output Q, Q15, - (* techmap_autopurge *) input A0, A1, A2, A3, CLK, D -); - parameter [15:0] INIT = 16'h0000; - wire $Q; - SRLC16 #( - .INIT(INIT), - ) _TECHMAP_REPLACE_ ( - .Q($Q), .Q(Q15), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .CLK(CLK), .D(D) - ); - $__ABC9_RAM6 q (.A($Q), .S({1'b1, A3, A2, A1, A0, 1'b1}), .Y(Q)); -endmodule - -module SRLC16E ( - output Q, Q15, - (* techmap_autopurge *) input A0, A1, A2, A3, CE, CLK, D -); - parameter [15:0] INIT = 16'h0000; - parameter [0:0] IS_CLK_INVERTED = 1'b0; - wire $Q; - SRLC16E #( - .INIT(INIT), .IS_CLK_INVERTED(IS_CLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .Q($Q), .Q(Q15), - .A0(A0), .A1(A1), .A2(A2), .A3(A3), .CE(CE), .CLK(CLK), .D(D) - ); - $__ABC9_RAM6 q (.A($Q), .S({1'b1, A3, A2, A1, A0, 1'b1}), .Y(Q)); -endmodule - -module SRLC32E ( - output Q, - output Q31, - (* techmap_autopurge *) input [4:0] A, - (* techmap_autopurge *) input CE, CLK, D -); - parameter [31:0] INIT = 32'h00000000; - parameter [0:0] IS_CLK_INVERTED = 1'b0; - wire $Q; - SRLC32E #( - .INIT(INIT), .IS_CLK_INVERTED(IS_CLK_INVERTED) - ) _TECHMAP_REPLACE_ ( - .Q($Q), .Q31(Q31), - .A(A), .CE(CE), .CLK(CLK), .D(D) - ); - $__ABC9_RAM6 q (.A($Q), .S({1'b1, A}), .Y(Q)); -endmodule - -module DSP48E1 ( - (* techmap_autopurge *) output [29:0] ACOUT, - (* techmap_autopurge *) output [17:0] BCOUT, - (* techmap_autopurge *) output reg CARRYCASCOUT, - (* techmap_autopurge *) output reg [3:0] CARRYOUT, - (* techmap_autopurge *) output reg MULTSIGNOUT, - (* techmap_autopurge *) output OVERFLOW, - (* techmap_autopurge *) output reg signed [47:0] P, - (* techmap_autopurge *) output PATTERNBDETECT, - (* techmap_autopurge *) output PATTERNDETECT, - (* techmap_autopurge *) output [47:0] PCOUT, - (* techmap_autopurge *) output UNDERFLOW, - (* techmap_autopurge *) input signed [29:0] A, - (* techmap_autopurge *) input [29:0] ACIN, - (* techmap_autopurge *) input [3:0] ALUMODE, - (* techmap_autopurge *) input signed [17:0] B, - (* techmap_autopurge *) input [17:0] BCIN, - (* techmap_autopurge *) input [47:0] C, - (* techmap_autopurge *) input CARRYCASCIN, - (* techmap_autopurge *) input CARRYIN, - (* techmap_autopurge *) input [2:0] CARRYINSEL, - (* techmap_autopurge *) input CEA1, - (* techmap_autopurge *) input CEA2, - (* techmap_autopurge *) input CEAD, - (* techmap_autopurge *) input CEALUMODE, - (* techmap_autopurge *) input CEB1, - (* techmap_autopurge *) input CEB2, - (* techmap_autopurge *) input CEC, - (* techmap_autopurge *) input CECARRYIN, - (* techmap_autopurge *) input CECTRL, - (* techmap_autopurge *) input CED, - (* techmap_autopurge *) input CEINMODE, - (* techmap_autopurge *) input CEM, - (* techmap_autopurge *) input CEP, - (* techmap_autopurge *) input CLK, - (* techmap_autopurge *) input [24:0] D, - (* techmap_autopurge *) input [4:0] INMODE, - (* techmap_autopurge *) input MULTSIGNIN, - (* techmap_autopurge *) input [6:0] OPMODE, - (* techmap_autopurge *) input [47:0] PCIN, - (* techmap_autopurge *) input RSTA, - (* techmap_autopurge *) input RSTALLCARRYIN, - (* techmap_autopurge *) input RSTALUMODE, - (* techmap_autopurge *) input RSTB, - (* techmap_autopurge *) input RSTC, - (* techmap_autopurge *) input RSTCTRL, - (* techmap_autopurge *) input RSTD, - (* techmap_autopurge *) input RSTINMODE, - (* techmap_autopurge *) input RSTM, - (* techmap_autopurge *) input RSTP -); - parameter integer ACASCREG = 1; - parameter integer ADREG = 1; - parameter integer ALUMODEREG = 1; - parameter integer AREG = 1; - parameter AUTORESET_PATDET = "NO_RESET"; - parameter A_INPUT = "DIRECT"; - parameter integer BCASCREG = 1; - parameter integer BREG = 1; - parameter B_INPUT = "DIRECT"; - parameter integer CARRYINREG = 1; - parameter integer CARRYINSELREG = 1; - parameter integer CREG = 1; - parameter integer DREG = 1; - parameter integer INMODEREG = 1; - parameter integer MREG = 1; - parameter integer OPMODEREG = 1; - parameter integer PREG = 1; - parameter SEL_MASK = "MASK"; - parameter SEL_PATTERN = "PATTERN"; - parameter USE_DPORT = "FALSE"; - parameter USE_MULT = "MULTIPLY"; - parameter USE_PATTERN_DETECT = "NO_PATDET"; - parameter USE_SIMD = "ONE48"; - parameter [47:0] MASK = 48'h3FFFFFFFFFFF; - parameter [47:0] PATTERN = 48'h000000000000; - parameter [3:0] IS_ALUMODE_INVERTED = 4'b0; - parameter [0:0] IS_CARRYIN_INVERTED = 1'b0; - parameter [0:0] IS_CLK_INVERTED = 1'b0; - parameter [4:0] IS_INMODE_INVERTED = 5'b0; - parameter [6:0] IS_OPMODE_INVERTED = 7'b0; - - wire [47:0] $P, $PCOUT; - - DSP48E1 #( - .ACASCREG(ACASCREG), - .ADREG(ADREG), - .ALUMODEREG(ALUMODEREG), - .AREG(AREG), - .AUTORESET_PATDET(AUTORESET_PATDET), - .A_INPUT(A_INPUT), - .BCASCREG(BCASCREG), - .BREG(BREG), - .B_INPUT(B_INPUT), - .CARRYINREG(CARRYINREG), - .CARRYINSELREG(CARRYINSELREG), - .CREG(CREG), - .DREG(DREG), - .INMODEREG(INMODEREG), - .MREG(MREG), - .OPMODEREG(OPMODEREG), - .PREG(PREG), - .SEL_MASK(SEL_MASK), - .SEL_PATTERN(SEL_PATTERN), - .USE_DPORT(USE_DPORT), - .USE_MULT(USE_MULT), - .USE_PATTERN_DETECT(USE_PATTERN_DETECT), - .USE_SIMD(USE_SIMD), - .MASK(MASK), - .PATTERN(PATTERN), - .IS_ALUMODE_INVERTED(IS_ALUMODE_INVERTED), - .IS_CARRYIN_INVERTED(IS_CARRYIN_INVERTED), - .IS_CLK_INVERTED(IS_CLK_INVERTED), - .IS_INMODE_INVERTED(IS_INMODE_INVERTED), - .IS_OPMODE_INVERTED(IS_OPMODE_INVERTED) - ) _TECHMAP_REPLACE_ ( - .ACOUT(ACOUT), - .BCOUT(BCOUT), - .CARRYCASCOUT(CARRYCASCOUT), - .CARRYOUT(CARRYOUT), - .MULTSIGNOUT(MULTSIGNOUT), - .OVERFLOW(OVERFLOW), - .P($P), - .PATTERNBDETECT(PATTERNBDETECT), - .PATTERNDETECT(PATTERNDETECT), - .PCOUT($PCOUT), - .UNDERFLOW(UNDERFLOW), - .A(A), - .ACIN(ACIN), - .ALUMODE(ALUMODE), - .B(B), - .BCIN(BCIN), - .C(C), - .CARRYCASCIN(CARRYCASCIN), - .CARRYIN(CARRYIN), - .CARRYINSEL(CARRYINSEL), - .CEA1(CEA1), - .CEA2(CEA2), - .CEAD(CEAD), - .CEALUMODE(CEALUMODE), - .CEB1(CEB1), - .CEB2(CEB2), - .CEC(CEC), - .CECARRYIN(CECARRYIN), - .CECTRL(CECTRL), - .CED(CED), - .CEINMODE(CEINMODE), - .CEM(CEM), - .CEP(CEP), - .CLK(CLK), - .D(D), - .INMODE(INMODE), - .MULTSIGNIN(MULTSIGNIN), - .OPMODE(OPMODE), - .PCIN(PCIN), - .RSTA(RSTA), - .RSTALLCARRYIN(RSTALLCARRYIN), - .RSTALUMODE(RSTALUMODE), - .RSTB(RSTB), - .RSTC(RSTC), - .RSTCTRL(RSTCTRL), - .RSTD(RSTD), - .RSTINMODE(RSTINMODE), - .RSTM(RSTM), - .RSTP(RSTP) - ); - $__ABC9_DSP48E1 #( - .ADREG(ADREG), - .AREG(AREG), - .BREG(BREG), - .CREG(CREG), - .DREG(DREG), - .MREG(MREG), - .PREG(PREG), - .USE_DPORT(USE_DPORT), - .USE_MULT(USE_MULT) - ) dsp_comb ( - .$A(A), .$B(B), .$C(C), .$D(D), .$P($P), .$PCIN(PCIN), .$PCOUT($PCOUT), .P(P), .PCOUT(PCOUT)); -endmodule diff --git a/techlibs/xilinx/abc9_model.v b/techlibs/xilinx/abc9_model.v index 2d109ef8a..db44ff00b 100644 --- a/techlibs/xilinx/abc9_model.v +++ b/techlibs/xilinx/abc9_model.v @@ -37,174 +37,3 @@ module \$__XILINX_MUXF78 (output O, input I0, I1, I2, I3, S0, S1); (S1 => O) = 273; endspecify endmodule - -// Box to emulate async behaviour of FDC* -(* abc9_box, lib_whitebox *) -module \$__ABC9_ASYNC0 (input A, S, output Y); - assign Y = S ? 1'b0 : A; - specify - (A => Y) = 0; - // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - (S => Y) = 764; - endspecify -endmodule - -// Box to emulate async behaviour of FDP* -(* abc9_box, lib_whitebox *) -module \$__ABC9_ASYNC1 (input A, S, output Y); - assign Y = S ? 1'b1 : A; - specify - (A => Y) = 0; - // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - (S => Y) = 764; - endspecify -endmodule - -// Box to emulate comb/seq behaviour of RAM{32,64} and SRL{16,32} -// Necessary since RAMD* and SRL* have both combinatorial (i.e. -// same-cycle read operation) and sequential (write operation -// is only committed on the next clock edge). -// To model the combinatorial path, such cells have to be split -// into comb and seq parts, with this box modelling only the former. -(* abc9_box *) -module \$__ABC9_RAM6 (input A, input [5:0] S, output Y); - specify - (A => Y) = 0; - (S[0] => Y) = 642; - (S[1] => Y) = 631; - (S[2] => Y) = 472; - (S[3] => Y) = 407; - (S[4] => Y) = 238; - (S[5] => Y) = 127; - endspecify -endmodule -// Box to emulate comb/seq behaviour of RAM128 -(* abc9_box *) -module \$__ABC9_RAM7 (input A, input [6:0] S, output Y); - specify - (A => Y) = 0; - // https://github.com/SymbiFlow/prjxray-db/blob/1c85daf1b115da4d27ca83c6b89f53a94de39748/artix7/timings/slicel.sdf#L867 - (S[0] => Y) = 642 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[1] => Y) = 631 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[2] => Y) = 472 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[3] => Y) = 407 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[4] => Y) = 238 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[5] => Y) = 127 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; - (S[6] => Y) = 0 + 296 /* to select F7BMUX */ + 174 /* CMUX */; - endspecify -endmodule - -// Boxes used to represent the comb behaviour of DSP48E1 -(* abc9_box *) -module $__ABC9_DSP48E1 ( - input [29:0] $A, - input [17:0] $B, - input [47:0] $C, - input [24:0] $D, - input [47:0] $P, - input [47:0] $PCIN, - input [47:0] $PCOUT, - output [47:0] P, - output [47:0] PCOUT -); - parameter integer ADREG = 1; - parameter integer AREG = 1; - parameter integer BREG = 1; - parameter integer CREG = 1; - parameter integer DREG = 1; - parameter integer MREG = 1; - parameter integer PREG = 1; - parameter USE_DPORT = "FALSE"; - parameter USE_MULT = "MULTIPLY"; - - function integer \A.P.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \A.P.comb = 2823; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \A.P.comb = 3806; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \A.P.comb = 1523; - end - endfunction - function integer \A.PCOUT.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \A.PCOUT.comb = 2970; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \A.PCOUT.comb = 3954; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \A.PCOUT.comb = 1671; - end - endfunction - function integer \B.P.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \B.P.comb = 2690; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \B.P.comb = 2690; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \B.P.comb = 1509; - end - endfunction - function integer \B.PCOUT.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \B.PCOUT.comb = 2838; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \B.PCOUT.comb = 2838; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \B.PCOUT.comb = 1658; - end - endfunction - function integer \C.P.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \C.P.comb = 1325; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \C.P.comb = 1325; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \C.P.comb = 1325; - end - endfunction - function integer \C.PCOUT.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") \C.PCOUT.comb = 1474; - else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \C.PCOUT.comb = 1474; - else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") \C.PCOUT.comb = 1474; - end - endfunction - function integer \D.P.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \D.P.comb = 3717; - end - endfunction - function integer \D.PCOUT.comb ; - begin - if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") \D.PCOUT.comb = 3700; - end - endfunction - - specify - ($P *> P) = 0; - ($PCOUT *> PCOUT) = 0; - endspecify - - // Identical comb delays to DSP48E1 in cells_sim.v - generate - if (PREG == 0 && MREG == 0 && AREG == 0 && ADREG == 0) - specify - ($A *> P) = \A.P.comb (); - ($A *> PCOUT) = \A.PCOUT.comb (); - endspecify - - if (PREG == 0 && MREG == 0 && BREG == 0) - specify - ($B *> P) = \B.P.comb (); - ($B *> PCOUT) = \B.PCOUT.comb (); - endspecify - - if (PREG == 0 && CREG == 0) - specify - ($C *> P) = \C.P.comb (); - ($C *> PCOUT) = \C.PCOUT.comb (); - endspecify - - if (PREG == 0 && MREG == 0 && ADREG == 0 && DREG == 0) - specify - ($D *> P) = \D.P.comb (); - ($D *> PCOUT) = \D.PCOUT.comb (); - endspecify - - if (PREG == 0) - specify - ($PCIN *> P) = 1107; - ($PCIN *> PCOUT) = 1255; - endspecify - endgenerate -endmodule diff --git a/techlibs/xilinx/abc9_unmap.v b/techlibs/xilinx/abc9_unmap.v deleted file mode 100644 index 5604ceb0a..000000000 --- a/techlibs/xilinx/abc9_unmap.v +++ /dev/null @@ -1,61 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> - * 2019 Eddie Hung <eddie@fpgeh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// ============================================================================ - -(* techmap_celltype = "$__ABC9_ASYNC0 $__ABC9_ASYNC1" *) -module $__ABC9_ASYNC01(input A, S, output Y); - assign Y = A; -endmodule - -module $__ABC9_FF_(input D, output Q); - assign Q = D; -endmodule - -module $__ABC9_RAM6(input A, input [5:0] S, output Y); - assign Y = A; -endmodule -module $__ABC9_RAM7(input A, input [6:0] S, output Y); - assign Y = A; -endmodule - -module $__ABC9_DSP48E1( - input [29:0] $A, - input [17:0] $B, - input [47:0] $C, - input [24:0] $D, - input [47:0] $P, - input [47:0] $PCIN, - input [47:0] $PCOUT, - output [47:0] P, - output [47:0] PCOUT -); - parameter integer ADREG = 1; - parameter integer AREG = 1; - parameter integer BREG = 1; - parameter integer CREG = 1; - parameter integer DREG = 1; - parameter integer MREG = 1; - parameter integer PREG = 1; - parameter USE_DPORT = "FALSE"; - parameter USE_MULT = "MULTIPLY"; - - assign P = $P, PCOUT = $PCOUT; -endmodule diff --git a/techlibs/xilinx/cells_sim.v b/techlibs/xilinx/cells_sim.v index 63223afbf..d87cfe91b 100644 --- a/techlibs/xilinx/cells_sim.v +++ b/techlibs/xilinx/cells_sim.v @@ -36,6 +36,9 @@ module IBUF( parameter IOSTANDARD = "default"; parameter IBUF_LOW_PWR = 0; assign O = I; + specify + (I => O) = 0; + endspecify endmodule module IBUFG( @@ -57,6 +60,9 @@ module OBUF( parameter DRIVE = 12; parameter SLEW = "SLOW"; assign O = I; + specify + (I => O) = 0; + endspecify endmodule module IOBUF ( @@ -72,6 +78,10 @@ module IOBUF ( parameter SLEW = "SLOW"; assign IO = T ? 1'bz : I; assign O = IO; + specify + (I => IO) = 0; + (IO => O) = 0; + endspecify endmodule module OBUFT ( @@ -85,14 +95,20 @@ module OBUFT ( parameter IOSTANDARD = "DEFAULT"; parameter SLEW = "SLOW"; assign O = T ? 1'bz : I; + specify + (I => O) = 0; + endspecify endmodule module BUFG( (* clkbuf_driver *) output O, input I); - assign O = I; + specify + // https://github.com/SymbiFlow/prjxray-db/blob/4bc6385ab300b1819848371f508185f57b649a0e/artix7/timings/CLK_BUFG_TOP_R.sdf#L11 + (I => O) = 96; + endspecify endmodule module BUFGCTRL( @@ -499,8 +515,8 @@ module FDRE ( endgenerate specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , posedge C &&& CE && !IS_C_INVERTED , -46); // Negative times not currently supported - //$setup(D , negedge C &&& CE && IS_C_INVERTED , -46); // Negative times not currently supported + $setup(D , posedge C &&& CE && !IS_C_INVERTED , /*-46*/ 0); // Negative times not currently supported + $setup(D , negedge C &&& CE && IS_C_INVERTED , /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, posedge C &&& !IS_C_INVERTED, 109); $setup(CE, negedge C &&& IS_C_INVERTED, 109); @@ -508,10 +524,10 @@ module FDRE ( $setup(R , posedge C &&& !IS_C_INVERTED, 404); $setup(R , negedge C &&& IS_C_INVERTED, 404); // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 - if (!IS_C_INVERTED && R ^ IS_R_INVERTED) (posedge C => (Q : 1'b0)) = 303; - if ( IS_C_INVERTED && R ^ IS_R_INVERTED) (negedge C => (Q : 1'b0)) = 303; - if (!IS_C_INVERTED && R ~^ IS_R_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; - if ( IS_C_INVERTED && R ~^ IS_R_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if (!IS_C_INVERTED && R != IS_R_INVERTED) (posedge C => (Q : 1'b0)) = 303; + if ( IS_C_INVERTED && R != IS_R_INVERTED) (negedge C => (Q : 1'b0)) = 303; + if (!IS_C_INVERTED && R == IS_R_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && R == IS_R_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; endspecify endmodule @@ -529,7 +545,7 @@ module FDRE_1 ( always @(negedge C) if (R) Q <= 1'b0; else if (CE) Q <= D; specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + $setup(D , negedge C &&& CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, negedge C, 109); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 @@ -564,8 +580,8 @@ module FDSE ( endgenerate specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , posedge C &&& !IS_C_INVERTED && CE, -46); // Negative times not currently supported - //$setup(D , negedge C &&& IS_C_INVERTED && CE, -46); // Negative times not currently supported + $setup(D , posedge C &&& !IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported + $setup(D , negedge C &&& IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, posedge C &&& !IS_C_INVERTED, 109); $setup(CE, negedge C &&& IS_C_INVERTED, 109); @@ -573,10 +589,10 @@ module FDSE ( $setup(S , posedge C &&& !IS_C_INVERTED, 404); $setup(S , negedge C &&& IS_C_INVERTED, 404); // https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLL_L.sdf#L243 - if (!IS_C_INVERTED && S ^ IS_S_INVERTED) (posedge C => (Q : 1'b1)) = 303; - if ( IS_C_INVERTED && S ^ IS_S_INVERTED) (negedge C => (Q : 1'b1)) = 303; - if (!IS_C_INVERTED && S ~^ IS_S_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; - if ( IS_C_INVERTED && S ~^ IS_S_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if (!IS_C_INVERTED && S != IS_S_INVERTED) (posedge C => (Q : 1'b1)) = 303; + if ( IS_C_INVERTED && S != IS_S_INVERTED) (negedge C => (Q : 1'b1)) = 303; + if (!IS_C_INVERTED && S == IS_S_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && S == IS_S_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; endspecify endmodule @@ -594,7 +610,7 @@ module FDSE_1 ( always @(negedge C) if (S) Q <= 1'b1; else if (CE) Q <= D; specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + $setup(D , negedge C &&& CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE, negedge C, 109); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 @@ -640,7 +656,7 @@ module FDRSE ( Q <= d; endmodule -(* abc9_flop, lib_whitebox *) +(* abc9_box, lib_whitebox *) module FDCE ( output reg Q, (* clkbuf_sink *) @@ -667,8 +683,8 @@ module FDCE ( endgenerate specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , posedge C &&& !IS_C_INVERTED && CE, -46); // Negative times not currently supported - //$setup(D , negedge C &&& IS_C_INVERTED && CE, -46); // Negative times not currently supported + $setup(D , posedge C &&& !IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported + $setup(D , negedge C &&& IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , posedge C &&& !IS_C_INVERTED, 109); $setup(CE , negedge C &&& IS_C_INVERTED, 109); @@ -676,14 +692,20 @@ module FDCE ( $setup(CLR, posedge C &&& !IS_C_INVERTED, 404); $setup(CLR, negedge C &&& IS_C_INVERTED, 404); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - //if (!IS_CLR_INVERTED) (posedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 - //if ( IS_CLR_INVERTED) (negedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 - if (!IS_C_INVERTED && CLR ~^ IS_CLR_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; - if ( IS_C_INVERTED && CLR ~^ IS_CLR_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; +`ifndef YOSYS + if (!IS_CLR_INVERTED) (posedge CLR => (Q : 1'b0)) = 764; + if ( IS_CLR_INVERTED) (negedge CLR => (Q : 1'b0)) = 764; +`else + if (IS_CLR_INVERTED != CLR) (CLR => Q) = 764; // Technically, this should be an edge sensitive path + // but for facilitating a bypass box, let's pretend it's + // a simple path +`endif + if (!IS_C_INVERTED && CLR == IS_CLR_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && CLR == IS_CLR_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; endspecify endmodule -(* abc9_flop, lib_whitebox *) +(* abc9_box, lib_whitebox *) module FDCE_1 ( output reg Q, (* clkbuf_sink *) @@ -697,18 +719,24 @@ module FDCE_1 ( always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D; specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + $setup(D , negedge C &&& CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , negedge C, 109); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 $setup(CLR, negedge C, 404); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - //(posedge CLR => (Q : 1'b0)) = 764; // Captured by $__ABC9_ASYNC0 +`ifndef YOSYS + (posedge CLR => (Q : 1'b0)) = 764; +`else + if (CLR) (CLR => Q) = 764; // Technically, this should be an edge sensitive path + // but for facilitating a bypass box, let's pretend it's + // a simple path +`endif if (!CLR && CE) (negedge C => (Q : D)) = 303; endspecify endmodule -(* abc9_flop, lib_whitebox *) +(* abc9_box, lib_whitebox *) module FDPE ( output reg Q, (* clkbuf_sink *) @@ -734,8 +762,8 @@ module FDPE ( endgenerate specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , posedge C &&& !IS_C_INVERTED && CE, -46); // Negative times not currently supported - //$setup(D , negedge C &&& IS_C_INVERTED && CE, -46); // Negative times not currently supported + $setup(D , posedge C &&& !IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported + $setup(D , negedge C &&& IS_C_INVERTED && CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , posedge C &&& !IS_C_INVERTED, 109); $setup(CE , negedge C &&& IS_C_INVERTED, 109); @@ -743,14 +771,20 @@ module FDPE ( $setup(PRE, posedge C &&& !IS_C_INVERTED, 404); $setup(PRE, negedge C &&& IS_C_INVERTED, 404); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - //if (!IS_PRE_INVERTED) (posedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 - //if ( IS_PRE_INVERTED) (negedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 - if (!IS_C_INVERTED && PRE ~^ IS_PRE_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; - if ( IS_C_INVERTED && PRE ~^ IS_PRE_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; +`ifndef YOSYS + if (!IS_PRE_INVERTED) (posedge PRE => (Q : 1'b1)) = 764; + if ( IS_PRE_INVERTED) (negedge PRE => (Q : 1'b1)) = 764; +`else + if (IS_PRE_INVERTED != PRE) (PRE => Q) = 764; // Technically, this should be an edge sensitive path + // but for facilitating a bypass box, let's pretend it's + // a simple path +`endif + if (!IS_C_INVERTED && PRE == IS_PRE_INVERTED && CE) (posedge C => (Q : D ^ IS_D_INVERTED)) = 303; + if ( IS_C_INVERTED && PRE == IS_PRE_INVERTED && CE) (negedge C => (Q : D ^ IS_D_INVERTED)) = 303; endspecify endmodule -(* abc9_flop, lib_whitebox *) +(* abc9_box, lib_whitebox *) module FDPE_1 ( output reg Q, (* clkbuf_sink *) @@ -764,14 +798,19 @@ module FDPE_1 ( always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D; specify // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L249 - //$setup(D , negedge C &&& CE, -46); // Negative times not currently supported + $setup(D , negedge C &&& CE, /*-46*/ 0); // Negative times not currently supported // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 $setup(CE , negedge C, 109); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L274 $setup(PRE, negedge C, 404); // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L270 - //if (!IS_PRE_INVERTED) (posedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 - //if (IS_PRE_INVERTED) (negedge PRE => (Q : 1'b1)) = 764; // Captured by $__ABC9_ASYNC1 +`ifndef YOSYS + (posedge PRE => (Q : 1'b1)) = 764; +`else + if (PRE) (PRE => Q) = 764; // Technically, this should be an edge sensitive path + // but for facilitating a bypass box, let's pretend it's + // a simple path +`endif if (!PRE && CE) (negedge C => (Q : D)) = 303; endspecify endmodule @@ -1383,6 +1422,7 @@ module RAM16X1D_1 ( always @(negedge clk) if (WE) mem[a] <= D; endmodule +(* abc9_box, lib_whitebox *) module RAM32X1D ( output DPO, SPO, input D, @@ -1429,15 +1469,15 @@ module RAM32X1D ( if (!IS_WCLK_INVERTED) (posedge WCLK => (DPO : 1'bx)) = 1153; if ( IS_WCLK_INVERTED) (posedge WCLK => (SPO : D)) = 1153; if ( IS_WCLK_INVERTED) (negedge WCLK => (DPO : 1'bx)) = 1153; - // Captured by $__ABC9_RAM6 - //({A0,DPRA0} => {SPO,DPO}) = 642; - //({A1,DPRA1} => {SPO,DPO}) = 631; - //({A2,DPRA2} => {SPO,DPO}) = 472; - //({A3,DPRA3} => {SPO,DPO}) = 407; - //({A4,DPRA4} => {SPO,DPO}) = 238; + (A0 => SPO) = 642; (DPRA0 => DPO) = 642; + (A1 => SPO) = 632; (DPRA1 => DPO) = 631; + (A2 => SPO) = 472; (DPRA2 => DPO) = 472; + (A3 => SPO) = 407; (DPRA3 => DPO) = 407; + (A4 => SPO) = 238; (DPRA4 => DPO) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module RAM32X1D_1 ( output DPO, SPO, input D, @@ -1479,15 +1519,15 @@ module RAM32X1D_1 ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 if (WE) (negedge WCLK => (SPO : D)) = 1153; if (WE) (negedge WCLK => (DPO : 1'bx)) = 1153; - // Captured by $__ABC9_RAM6 - //({A0,DPRA0} => {SPO,DPO}) = 642; - //({A1,DPRA1} => {SPO,DPO}) = 631; - //({A2,DPRA2} => {SPO,DPO}) = 472; - //({A3,DPRA3} => {SPO,DPO}) = 407; - //({A4,DPRA4} => {SPO,DPO}) = 238; + (A0 => SPO) = 642; (DPRA0 => DPO) = 642; + (A1 => SPO) = 632; (DPRA1 => DPO) = 631; + (A2 => SPO) = 472; (DPRA2 => DPO) = 472; + (A3 => SPO) = 407; (DPRA3 => DPO) = 407; + (A4 => SPO) = 238; (DPRA4 => DPO) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module RAM64X1D ( output DPO, SPO, input D, @@ -1537,13 +1577,12 @@ module RAM64X1D ( if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DPO : 1'bx)) = 1153; if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (SPO : D)) = 1153; if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DPO : 1'bx)) = 1153; - // Captured by $__ABC9_RAM6 - //({A0,DPRA0} => {SPO,DPO}) = 642; - //({A1,DPRA1} => {SPO,DPO}) = 631; - //({A2,DPRA2} => {SPO,DPO}) = 472; - //({A3,DPRA3} => {SPO,DPO}) = 407; - //({A4,DPRA4} => {SPO,DPO}) = 238; - //({A5,DPRA5} => {SPO,DPO}) = 127; + (A0 => SPO) = 642; (DPRA0 => DPO) = 642; + (A1 => SPO) = 632; (DPRA1 => DPO) = 631; + (A2 => SPO) = 472; (DPRA2 => DPO) = 472; + (A3 => SPO) = 407; (DPRA3 => DPO) = 407; + (A4 => SPO) = 238; (DPRA4 => DPO) = 238; + (A5 => SPO) = 127; (DPRA5 => DPO) = 127; endspecify endmodule @@ -1586,9 +1625,16 @@ module RAM64X1D_1 ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 if (WE) (negedge WCLK => (SPO : D)) = 1153; if (WE) (negedge WCLK => (DPO : 1'bx)) = 1153; + (A0 => SPO) = 642; (DPRA0 => DPO) = 642; + (A1 => SPO) = 632; (DPRA1 => DPO) = 631; + (A2 => SPO) = 472; (DPRA2 => DPO) = 472; + (A3 => SPO) = 407; (DPRA3 => DPO) = 407; + (A4 => SPO) = 238; (DPRA4 => DPO) = 238; + (A5 => SPO) = 127; (DPRA5 => DPO) = 127; endspecify endmodule +(* abc9_box, lib_whitebox *) module RAM128X1D ( output DPO, SPO, input D, @@ -1632,22 +1678,21 @@ module RAM128X1D ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/31f51ac5ec7448dd6f79a8267f147123e4413c21/artix7/timings/CLBLM_R.sdf#L981 if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (SPO : D)) = 1153 + 217 /* to cross F7AMUX */ + 175 /* AMUX */; if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DPO : 1'bx)) = 1153 + 223 /* to cross F7BMUX */ + 174 /* CMUX */; + (A[0] => SPO) = 642 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[1] => SPO) = 631 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[2] => SPO) = 472 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[3] => SPO) = 407 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[4] => SPO) = 238 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[5] => SPO) = 127 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; + (A[6] => SPO) = 0 + 276 /* to select F7AMUX */ + 175 /* AMUX */; + (DPRA[0] => DPO) = 642 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[1] => DPO) = 631 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[2] => DPO) = 472 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[3] => DPO) = 407 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[4] => DPO) = 238 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[5] => DPO) = 127 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; + (DPRA[6] => DPO) = 0 + 296 /* to select MUXF7 */ + 174 /* CMUX */; `endif - // Captured by $__ABC9_RAM7 - //(A[0] => SPO) = 642 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[1] => SPO) = 631 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[2] => SPO) = 472 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[3] => SPO) = 407 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[4] => SPO) = 238 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[5] => SPO) = 127 + 193 /* to cross F7AMUX */ + 175 /* AMUX */; - //(A[6] => SPO) = 0 + 276 /* to select F7AMUX */ + 175 /* AMUX */; - //(DPRA[0] => DPO) = 642 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[1] => DPO) = 631 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[2] => DPO) = 472 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[3] => DPO) = 407 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[4] => DPO) = 238 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[5] => DPO) = 127 + 223 /* to cross MUXF7 */ + 174 /* CMUX */; - //(DPRA[6] => DPO) = 0 + 296 /* to select MUXF7 */ + 174 /* CMUX */; endspecify endmodule @@ -1671,6 +1716,7 @@ endmodule // Multi port. +(* abc9_box, lib_whitebox *) module RAM32M ( output [1:0] DOA, output [1:0] DOB, @@ -1767,12 +1813,11 @@ module RAM32M ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1061 if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOD[1] : DID[1])) = 1190; if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOD[1] : DID[1])) = 1190; - // Captured by $__ABC9_RAM6 - //({{2{ADDRA[0]}},{2{ADDRB[0]}},{2{ADDRC[0]}},{2{ADDRD[0]}}} => {DOA,DOB,DOC,DOD}) = 642; - //({{2{ADDRA[1]}},{2{ADDRB[1]}},{2{ADDRC[1]}},{2{ADDRD[1]}}} => {DOA,DOB,DOC,DOD}) = 631; - //({{2{ADDRA[2]}},{2{ADDRB[2]}},{2{ADDRC[2]}},{2{ADDRD[2]}}} => {DOA,DOB,DOC,DOD}) = 472; - //({{2{ADDRA[3]}},{2{ADDRB[3]}},{2{ADDRC[3]}},{2{ADDRD[3]}}} => {DOA,DOB,DOC,DOD}) = 407; - //({{2{ADDRA[4]}},{2{ADDRB[4]}},{2{ADDRC[4]}},{2{ADDRD[4]}}} => {DOA,DOB,DOC,DOD}) = 238; + (ADDRA[0] *> DOA) = 642; (ADDRB[0] *> DOB) = 642; (ADDRC[0] *> DOC) = 642; (ADDRD[0] *> DOD) = 642; + (ADDRA[1] *> DOA) = 631; (ADDRB[1] *> DOB) = 631; (ADDRC[1] *> DOC) = 631; (ADDRD[1] *> DOD) = 631; + (ADDRA[2] *> DOA) = 472; (ADDRB[2] *> DOB) = 472; (ADDRC[2] *> DOC) = 472; (ADDRD[2] *> DOD) = 472; + (ADDRA[3] *> DOA) = 407; (ADDRB[3] *> DOB) = 407; (ADDRC[3] *> DOC) = 407; (ADDRD[3] *> DOD) = 407; + (ADDRA[4] *> DOA) = 238; (ADDRB[4] *> DOB) = 238; (ADDRC[4] *> DOC) = 238; (ADDRD[4] *> DOD) = 238; endspecify endmodule @@ -1845,6 +1890,7 @@ module RAM32M16 ( end endmodule +(* abc9_box, lib_whitebox *) module RAM64M ( output DOA, output DOB, @@ -1923,12 +1969,11 @@ module RAM64M ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L1093 if (!IS_WCLK_INVERTED && WE) (posedge WCLK => (DOD : DID)) = 1163; if ( IS_WCLK_INVERTED && WE) (negedge WCLK => (DOD : DID)) = 1163; - // Captured by $__ABC9_RAM6 - //({ADDRA[0],ADDRB[0],ADDRC[0],ADDRD[0]} => {DOA,DOB,DOC,DOD}) = 642; - //({ADDRA[1],ADDRB[1],ADDRC[1],ADDRD[1]} => {DOA,DOB,DOC,DOD}) = 631; - //({ADDRA[2],ADDRB[2],ADDRC[2],ADDRD[2]} => {DOA,DOB,DOC,DOD}) = 472; - //({ADDRA[3],ADDRB[3],ADDRC[3],ADDRD[3]} => {DOA,DOB,DOC,DOD}) = 407; - //({ADDRA[4],ADDRB[4],ADDRC[4],ADDRD[4]} => {DOA,DOB,DOC,DOD}) = 238; + (ADDRA[0] => DOA) = 642; (ADDRB[0] => DOB) = 642; (ADDRC[0] => DOC) = 642; (ADDRD[0] => DOD) = 642; + (ADDRA[1] => DOA) = 631; (ADDRB[1] => DOB) = 631; (ADDRC[1] => DOC) = 631; (ADDRD[1] => DOD) = 631; + (ADDRA[2] => DOA) = 472; (ADDRB[2] => DOB) = 472; (ADDRC[2] => DOC) = 472; (ADDRD[2] => DOD) = 472; + (ADDRA[3] => DOA) = 407; (ADDRB[3] => DOB) = 407; (ADDRC[3] => DOC) = 407; (ADDRD[3] => DOD) = 407; + (ADDRA[4] => DOA) = 238; (ADDRB[4] => DOB) = 238; (ADDRC[4] => DOC) = 238; (ADDRD[4] => DOD) = 238; endspecify endmodule @@ -2045,6 +2090,7 @@ endmodule // Shift registers. +(* abc9_box, lib_whitebox *) module SRL16 ( output Q, input A0, A1, A2, A3, @@ -2063,14 +2109,14 @@ module SRL16 ( (posedge CLK => (Q : 1'bx)) = 1472; // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 $setup(D , posedge CLK, 173); - // Captured by $__ABC9_RAM6 - //(A0 => Q) = 631; - //(A1 => Q) = 472; - //(A2 => Q) = 407; - //(A3 => Q) = 238; + (A0 => Q) = 631; + (A1 => Q) = 472; + (A2 => Q) = 407; + (A3 => Q) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module SRL16E ( output Q, input A0, A1, A2, A3, CE, @@ -2096,16 +2142,19 @@ module SRL16E ( $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : D)) = 1472; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : D)) = 1472; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1472; if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1472; - // Captured by $__ABC9_RAM6 - //(A0 => Q) = 631; - //(A1 => Q) = 472; - //(A2 => Q) = 407; - //(A3 => Q) = 238; + (A0 => Q) = 631; + (A1 => Q) = 472; + (A2 => Q) = 407; + (A3 => Q) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module SRLC16 ( output Q, output Q15, @@ -2122,18 +2171,20 @@ module SRLC16 ( always @(posedge CLK) r <= { r[14:0], D }; specify - // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 - (posedge CLK => (Q : 1'bx)) = 1472; // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 $setup(D , posedge CLK, 173); - // Captured by $__ABC9_RAM6 - //(A0 => Q) = 631; - //(A1 => Q) = 472; - //(A2 => Q) = 407; - //(A3 => Q) = 238; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 + (posedge CLK => (Q : 1'bx)) = 1472; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L904 + (posedge CLK => (Q15 : 1'bx)) = 1114; + (A0 => Q) = 631; + (A1 => Q) = 472; + (A2 => Q) = 407; + (A3 => Q) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module SRLC16E ( output Q, output Q15, @@ -2160,18 +2211,23 @@ module SRLC16E ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE, posedge CLK &&& !IS_CLK_INVERTED, 109); + $setup(CE, negedge CLK &&& IS_CLK_INVERTED, 109); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : D)) = 1472; if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : D)) = 1472; - // Captured by $__ABC9_RAM6 - //(A0 => Q) = 642; - //(A1 => Q) = 631; - //(A2 => Q) = 472; - //(A3 => Q) = 407; - //(A4 => Q) = 238; + // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L904 + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q15 : 1'bx)) = 1114; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q15 : 1'bx)) = 1114; + (A0 => Q) = 631; + (A1 => Q) = 472; + (A2 => Q) = 407; + (A3 => Q) = 238; endspecify endmodule +(* abc9_box, lib_whitebox *) module SRLC32E ( output Q, output Q31, @@ -2199,18 +2255,20 @@ module SRLC32E ( // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L912 $setup(D , posedge CLK &&& !IS_CLK_INVERTED, 173); $setup(D , negedge CLK &&& IS_CLK_INVERTED, 173); + // https://github.com/SymbiFlow/prjxray-db/blob/23c8b0851f979f0799318eaca90174413a46b257/artix7/timings/slicel.sdf#L248 + $setup(CE, posedge CLK &&& !IS_CLK_INVERTED, 109); + $setup(CE, negedge CLK &&& IS_CLK_INVERTED, 109); // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L905 if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1472; if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1472; // Max delay from: https://github.com/SymbiFlow/prjxray-db/blob/34ea6eb08a63d21ec16264ad37a0a7b142ff6031/artix7/timings/CLBLM_R.sdf#L904 - if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q : 1'bx)) = 1114; - if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q : 1'bx)) = 1114; - // Captured by $__ABC9_RAM6 - //(A0 => Q) = 642; - //(A1 => Q) = 631; - //(A2 => Q) = 472; - //(A3 => Q) = 407; - //(A4 => Q) = 238; + if (!IS_CLK_INVERTED && CE) (posedge CLK => (Q31 : 1'bx)) = 1114; + if ( IS_CLK_INVERTED && CE) (negedge CLK => (Q31 : 1'bx)) = 1114; + (A[0] => Q) = 642; + (A[1] => Q) = 631; + (A[2] => Q) = 472; + (A[3] => Q) = 407; + (A[4] => Q) = 238; endspecify endmodule @@ -2978,6 +3036,10 @@ endmodule // Virtex 6, Series 7. +`ifdef YOSYS +(* abc9_box=!(PREG || AREG || ADREG || BREG || CREG || DREG || MREG), + lib_whitebox=!(PREG || AREG || ADREG || BREG || CREG || DREG || MREG) *) +`endif module DSP48E1 ( output [29:0] ACOUT, output [17:0] BCOUT, diff --git a/techlibs/xilinx/synth_xilinx.cc b/techlibs/xilinx/synth_xilinx.cc index 229ffcb3d..d0de73f83 100644 --- a/techlibs/xilinx/synth_xilinx.cc +++ b/techlibs/xilinx/synth_xilinx.cc @@ -143,7 +143,7 @@ struct SynthXilinxPass : public ScriptPass std::string top_opt, edif_file, blif_file, family; bool flatten, retime, vpr, ise, noiopad, noclkbuf, nobram, nolutram, nosrl, nocarry, nowidelut, nodsp, uram; - bool abc9, dff_mode; + bool abc9, dff; bool flatten_before_abc; int widemux; int lut_size; @@ -170,7 +170,7 @@ struct SynthXilinxPass : public ScriptPass nodsp = false; uram = false; abc9 = false; - dff_mode = false; + dff = false; flatten_before_abc = false; widemux = 0; lut_size = 6; @@ -217,7 +217,7 @@ struct SynthXilinxPass : public ScriptPass continue; } if (args[argidx] == "-retime") { - dff_mode = true; + dff = true; retime = true; continue; } @@ -281,7 +281,7 @@ struct SynthXilinxPass : public ScriptPass continue; } if (args[argidx] == "-dff") { - dff_mode = true; + dff = true; continue; } break; @@ -595,9 +595,11 @@ struct SynthXilinxPass : public ScriptPass run("clean"); } - if (check_label("map_ffs")) { + if (check_label("map_ffs", "('-abc9' only)")) { if (abc9 || help_mode) { - run("techmap -map " + ff_map_file, "('-abc9' only)"); + if (dff || help_mode) + run("zinit -all w:* t:$_DFF_?_ t:$_DFFE_??_ t:$__DFFS*", "('-dff' only)"); + run("techmap -map " + ff_map_file); } } @@ -606,18 +608,14 @@ struct SynthXilinxPass : public ScriptPass if (flatten_before_abc) run("flatten"); if (help_mode) - run("abc -luts 2:2,3,6:5[,10,20] [-dff] [-D 1]", "(option for 'nowidelut', '-dff', '-retime')"); + run("abc -luts 2:2,3,6:5[,10,20] [-dff] [-D 1]", "(option for '-nowidelut', '-dff', '-retime')"); else if (abc9) { if (lut_size != 6) log_error("'synth_xilinx -abc9' not currently supported for LUT4-based devices.\n"); if (family != "xc7") log_warning("'synth_xilinx -abc9' not currently supported for the '%s' family, " "will use timing for 'xc7' instead.\n", family.c_str()); - std::string techmap_args = "-map +/xilinx/abc9_map.v -max_iter 1"; - if (dff_mode) - techmap_args += " -D DFF_MODE"; - run("techmap " + techmap_args); - run("read_verilog -icells -lib -specify +/abc9_model.v +/xilinx/abc9_model.v"); + run("read_verilog -icells -lib -specify +/xilinx/abc9_model.v"); std::string abc9_opts; std::string k = "synth_xilinx.abc9.W"; if (active_design && active_design->scratchpad.count(k)) @@ -628,10 +626,9 @@ struct SynthXilinxPass : public ScriptPass } if (nowidelut) abc9_opts += stringf(" -maxlut %d", lut_size); - if (dff_mode) + if (dff) abc9_opts += " -dff"; run("abc9" + abc9_opts); - run("techmap -map +/xilinx/abc9_unmap.v"); } else { std::string abc_opts; @@ -648,7 +645,7 @@ struct SynthXilinxPass : public ScriptPass else abc_opts += " -luts 2:2,3,6:5,10,20,40"; } - if (dff_mode) + if (dff) abc_opts += " -dff"; if (retime) abc_opts += " -D 1"; |