9 files changed, 116 insertions, 0 deletions
diff --git a/tests/arch/machxo2/.gitignore b/tests/arch/machxo2/.gitignore
new file mode 100644
index 000000000..1d329c933
--- /dev/null
+++ b/tests/arch/machxo2/.gitignore
@@ -0,0 +1,2 @@
+*.log
+/run-test.mk
diff --git a/tests/arch/machxo2/add_sub.ys b/tests/arch/machxo2/add_sub.ys
new file mode 100644
index 000000000..d9497b818
--- /dev/null
+++ b/tests/arch/machxo2/add_sub.ys
@@ -0,0 +1,8 @@
+read_verilog ../common/add_sub.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 10 t:LUT4
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/dffs.ys b/tests/arch/machxo2/dffs.ys
new file mode 100644
index 000000000..83a79a9d6
--- /dev/null
+++ b/tests/arch/machxo2/dffs.ys
@@ -0,0 +1,19 @@
+read_verilog ../common/dffs.v
+design -save read
+
+hierarchy -top dff
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:FACADE_FF
+select -assert-none t:FACADE_FF t:FACADE_IO %% t:* %D
+
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 2 t:FACADE_FF t:LUT4
+select -assert-none t:FACADE_FF t:LUT4 t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/fsm.ys b/tests/arch/machxo2/fsm.ys
new file mode 100644
index 000000000..847a61161
--- /dev/null
+++ b/tests/arch/machxo2/fsm.ys
@@ -0,0 +1,15 @@
+read_verilog ../common/fsm.v
+hierarchy -top fsm
+proc
+flatten
+
+equiv_opt -run :prove -map +/machxo2/cells_sim.v synth_machxo2
+miter -equiv -make_assert -flatten gold gate miter
+sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+
+select -assert-max 16 t:LUT4
+select -assert-count 6 t:FACADE_FF
+select -assert-none t:FACADE_FF t:LUT4 t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/logic.ys b/tests/arch/machxo2/logic.ys
new file mode 100644
index 000000000..bf93ab128
--- /dev/null
+++ b/tests/arch/machxo2/logic.ys
@@ -0,0 +1,8 @@
+read_verilog ../common/logic.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 9 t:LUT4
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/mux.ys b/tests/arch/machxo2/mux.ys
new file mode 100644
index 000000000..7b7e62d4c
--- /dev/null
+++ b/tests/arch/machxo2/mux.ys
@@ -0,0 +1,40 @@
+read_verilog ../common/mux.v
+design -save read
+
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:LUT4
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 2 t:LUT4
+
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 5 t:LUT4
+
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-max 12 t:LUT4
+
+select -assert-none t:LUT4 t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/run-test.sh b/tests/arch/machxo2/run-test.sh
new file mode 100644
index 000000000..4be4b70ae
--- /dev/null
+++ b/tests/arch/machxo2/run-test.sh
@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+set -eu
+source ../../gen-tests-makefile.sh
+run_tests --yosys-scripts --bash --yosys-args "-w 'Yosys has only limited support for tri-state logic at the moment.'"
diff --git a/tests/arch/machxo2/shifter.ys b/tests/arch/machxo2/shifter.ys
new file mode 100644
index 000000000..87fdab0fa
--- /dev/null
+++ b/tests/arch/machxo2/shifter.ys
@@ -0,0 +1,10 @@
+read_verilog ../common/shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 8 t:FACADE_FF
+select -assert-none t:FACADE_FF t:FACADE_IO %% t:* %D
diff --git a/tests/arch/machxo2/tribuf.ys b/tests/arch/machxo2/tribuf.ys
new file mode 100644
index 000000000..fce342e18
--- /dev/null
+++ b/tests/arch/machxo2/tribuf.ys
@@ -0,0 +1,10 @@
+read_verilog ../common/tribuf.v
+hierarchy -top tristate
+proc
+flatten
+equiv_opt -assert -map +/machxo2/cells_sim.v synth_machxo2 # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd tristate # Constrain all select calls below inside the top module
+select -assert-count 3 t:FACADE_IO
+select -assert-count 1 t:LUT4
+select -assert-none t:FACADE_IO t:LUT4 %% t:* %D