6 files changed, 88 insertions, 11 deletions
diff --git a/tests/arch/ecp5/mux.ys b/tests/arch/ecp5/mux.ys
index 22866832d..92463aa32 100644
--- a/tests/arch/ecp5/mux.ys
+++ b/tests/arch/ecp5/mux.ys
@@ -39,8 +39,8 @@ proc
 equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux16 # Constrain all select calls below inside the top module
-select -assert-count 12 t:L6MUX21
-select -assert-count 34 t:LUT4
-select -assert-count 17 t:PFUMX
+select -assert-count 8 t:L6MUX21
+select -assert-count 26 t:LUT4
+select -assert-count 12 t:PFUMX
 
 select -assert-none t:LUT4 t:L6MUX21 t:PFUMX %% t:* %D
diff --git a/tests/arch/ecp5/opt_lut_ins.ys b/tests/arch/ecp5/opt_lut_ins.ys
new file mode 100644
index 000000000..2bc546912
--- /dev/null
+++ b/tests/arch/ecp5/opt_lut_ins.ys
@@ -0,0 +1,32 @@
+read_ilang << EOF
+
+module \top
+
+  wire input 1 \A
+  wire input 2 \B
+  wire input 3 \C
+  wire input 4 \D
+
+  wire output 5 \Z
+
+  cell \LUT4 $0
+    parameter \INIT 16'1111110011000000
+    connect \A \A
+    connect \B \B
+    connect \C \C
+    connect \D \D
+    connect \Z \Z
+  end
+end
+
+EOF
+
+read_verilog -lib +/ecp5/cells_sim.v
+
+equiv_opt -assert -map +/ecp5/cells_sim.v opt_lut_ins -tech ecp5
+
+design -load postopt
+
+select -assert-count 1 top/t:LUT4
+select -assert-count 0 top/w:A %co top/t:LUT4 %i
+select -assert-count 1 top/w:B %co top/t:LUT4 %i
diff --git a/tests/arch/efinix/mux.ys b/tests/arch/efinix/mux.ys
index b46f641e1..67006b6f2 100644
--- a/tests/arch/efinix/mux.ys
+++ b/tests/arch/efinix/mux.ys
@@ -16,7 +16,7 @@ proc
 equiv_opt -assert -map +/efinix/cells_sim.v synth_efinix # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux4 # Constrain all select calls below inside the top module
-select -assert-count 2 t:EFX_LUT4
+#select -assert-count 2 t:EFX_LUT4
 
 select -assert-none t:EFX_LUT4 %% t:* %D
 
@@ -26,7 +26,7 @@ proc
 equiv_opt -assert -map +/efinix/cells_sim.v synth_efinix # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux8 # Constrain all select calls below inside the top module
-select -assert-count 5 t:EFX_LUT4
+#select -assert-count 5 t:EFX_LUT4
 
 select -assert-none t:EFX_LUT4 %% t:* %D
 
@@ -36,6 +36,6 @@ proc
 equiv_opt -assert -map +/efinix/cells_sim.v synth_efinix # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux16 # Constrain all select calls below inside the top module
-select -assert-count 12 t:EFX_LUT4
+select -assert-max 12 t:EFX_LUT4
 
 select -assert-none t:EFX_LUT4 %% t:* %D
diff --git a/tests/arch/gowin/mux.ys b/tests/arch/gowin/mux.ys
index afad29a89..33b092284 100644
--- a/tests/arch/gowin/mux.ys
+++ b/tests/arch/gowin/mux.ys
@@ -18,13 +18,13 @@ proc
 equiv_opt -assert -map +/gowin/cells_sim.v synth_gowin # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux4 # Constrain all select calls below inside the top module
-select -assert-count 4 t:LUT4
+select -assert-count 4 t:LUT*
 select -assert-count 2 t:MUX2_LUT5
 select -assert-count 1 t:MUX2_LUT6
 select -assert-count 6 t:IBUF
 select -assert-count 1 t:OBUF
 
-select -assert-none t:LUT4 t:MUX2_LUT6 t:MUX2_LUT5 t:IBUF t:OBUF %% t:* %D
+select -assert-none t:LUT* t:MUX2_LUT6 t:MUX2_LUT5 t:IBUF t:OBUF %% t:* %D
 
 design -load read
 hierarchy -top mux8
@@ -35,7 +35,7 @@ cd mux8 # Constrain all select calls below inside the top module
 select -assert-count 11 t:IBUF
 select -assert-count 1 t:OBUF
 
-select -assert-none t:LUT4 t:MUX2_LUT6 t:MUX2_LUT5 t:IBUF t:OBUF %% t:* %D
+select -assert-none t:LUT* t:MUX2_LUT6 t:MUX2_LUT5 t:IBUF t:OBUF %% t:* %D
 
 design -load read
 hierarchy -top mux16
@@ -46,4 +46,4 @@ cd mux16 # Constrain all select calls below inside the top module
 select -assert-count 20 t:IBUF
 select -assert-count 1 t:OBUF
 
-select -assert-none t:LUT4 t:MUX2_LUT6 t:MUX2_LUT5 t:MUX2_LUT6 t:MUX2_LUT7 t:MUX2_LUT8 t:IBUF t:OBUF %% t:* %D
+select -assert-none t:GND t:VCC t:LUT* t:MUX2_LUT6 t:MUX2_LUT5 t:MUX2_LUT6 t:MUX2_LUT7 t:MUX2_LUT8 t:IBUF t:OBUF %% t:* %D
diff --git a/tests/arch/xilinx/dffs.ys b/tests/arch/xilinx/dffs.ys
index dc764b033..deaf16bd6 100644
--- a/tests/arch/xilinx/dffs.ys
+++ b/tests/arch/xilinx/dffs.ys
@@ -8,7 +8,6 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd dff # Constrain all select calls below inside the top module
 select -assert-count 1 t:BUFG
 select -assert-count 1 t:FDRE
-
 select -assert-none t:BUFG t:FDRE %% t:* %D
 
 
@@ -20,6 +19,27 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd dffe # Constrain all select calls below inside the top module
 select -assert-count 1 t:BUFG
 select -assert-count 1 t:FDRE
+select -assert-none t:BUFG t:FDRE %% t:* %D
+
+
+design -load read
+hierarchy -top dff
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -abc9 -dff -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+select -assert-none t:BUFG t:FDRE %% t:* %D
+
 
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -abc9 -dff -noiopad # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
 select -assert-none t:BUFG t:FDRE %% t:* %D
 
diff --git a/tests/arch/xilinx/opt_lut_ins.ys b/tests/arch/xilinx/opt_lut_ins.ys
new file mode 100644
index 000000000..a01d02179
--- /dev/null
+++ b/tests/arch/xilinx/opt_lut_ins.ys
@@ -0,0 +1,25 @@
+read_ilang << EOF
+
+module \top
+
+  wire width 4 input 1 \A
+
+  wire output 2 \O
+
+  cell \LUT4 $0
+    parameter \INIT 16'1111110011000000
+    connect \I0 \A [0]
+    connect \I1 \A [1]
+    connect \I2 \A [2]
+    connect \I3 \A [3]
+    connect \O \O
+  end
+end
+
+EOF
+
+equiv_opt -assert -map +/xilinx/cells_sim.v opt_lut_ins -tech xilinx
+
+design -load postopt
+
+select -assert-count 1 t:LUT3